ISO Group Logo
Defense and Aerospace
Supply Chain Partner
A Dynatech International Company


NSN 5910-00-910-4098, 5910009104098
CAPACITOR,FIXED,CERAMIC DIELECTR

Federal Supply Classification
FSC 5910 - Capacitors
National Item Identification Number
NIIN 009104098
Codification Country
United States
Item Name Code
INC 00007
Criticality
(X) This item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
Hazardous Material Indicator Code
(P) There is no information in the HMIRS; however, the NSN is in an FSC in Table II of Federal Standard 313 and an MSDS may be required by the user. The requirement for an MSDS is dependent on a hazard determination of the supplier or the intended end use of the product.
Availability: Readily Available Qualified Suppliers: Currently qualifying suppliers

Manufacture or supply this part?
Join our growing community of certified suppliers.

Let Us Know
  CALL ABOUT NSN 5910-00-910-4098
Our client representatives are standing by to help fulfill your request.

+1-321-773-5710

  REQUEST QUOTE for 5910-00-910-4098


Have a list that needs to be quoted? Upload it here.

DLMS® Summary

National Stock Number 5910-00-910-4098

National Stock Number (NSN) 5910-00-910-4098, or NIIN 009104098, (capacitor,fixed,ceramic dielectr) was assigned January 1, 1960 in the Federal Logistics Information System (FLIS). This NIIN is Available for Manual Assignment. This NSN does not replace any other NSNs.

There is only one manufacturer part number associated with this NSN. None of the associated part number(s) are considered obsolete. The manufacturer part numbers were originally supplied by one supplier. Today, one supplier is listed as an Active supplier for this NSN. Of the active suppliers, only one supplier is deemed design controlled or valid supply parts.

This part number has not been procured by the US Government in over 5 years.

This NSN is unique to one weapons system.

Based on a planned procurement review by the Primary Inventory Control Activity (PICA) on Jun 02, 2006, this NSN's acquisition method was noted as: Acquire only from the prime contractor although the engineering data identifies the Commercial and Government Entity Code (CAGE) and part number of a source other than the prime contractor. The annual buy value of this part falls below the screening threshold of $10,000 but it has been screened for known source(s). (NOTE: This code shall not be used when screening parts entering the inventory. It shall not be assigned in preference to or supersede any other AMSC.) Valid AMCs: 1, 2, 3, 4 and 5.

This NSN is assigned to Item Name Code (INC) 00007. [A CAPACITOR, WHOSE CAPACITANCE VALUE CANNOT BE ADJUSTED OR VARIED, HAVING A CERAMIC DIELECTRIC. IT MAY BE A SINGLE UNIT, OR CONSIST OF TWO OR MORE FIXED UNITS WHICH CANNOT BE SEPARATED.]. This item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. There is no information in the HMIRS; however, the NSN is in an FSC in Table II of Federal Standard 313 and an MSDS may be required by the user. The requirement for an MSDS is dependent on a hazard determination of the supplier or the intended end use of the product. NSN 5910009104098 does not contain precious metals.

This NSN is associated to Schedule B 8532290040: fixed capacitors, nesoi. The Schedule B End Use is listed as electric apparatus.

This information was last updated on .


Technical Characteristics

RELIABILITY INDICATOR
(AARG) NOT ESTABLISHEDNOT ESTABLISHEDNOT ESTABLISHED
UNABLE TO DECODE
(ABMK) UNABLE TO DECODE
UNABLE TO DECODE
(ABHP) UNABLE TO DECODE
TOLERANCE OF TEMP COEFFICIENT PER SECTION IN PPM PER DEG CELSIUS
(CRHD) -30.0/+30.0 SINGLE SECTION
BODY DIAMETER
(ABPM) 0.938 INCHES MAXIMUM
BODY LENGTH
(ADAQ) 0.187 INCHES MAXIMUM
BODY STYLE
(AAQL) W/O MTG FACILITIES, RADIAL TERMINALS
CAPACITANCE VALUE PER SECTION
(CQBQ) 20.000 PICOFARADS SINGLE SECTION
CENTER TO CENTER DISTANCE BETWEEN TERMINALS PARALLEL TO DIAMETER
(AEBS) 0.375 INCHES NOMINAL
DISSIPATION FACTOR AT REFERENCE TEMP IN PERCENT
(CWPM) 0.100
INSULATION RESISTANCE AT REFERENCE TEMP
(CWPK) 10000.0 MEGOHMS
MATERIAL
(MATT) PLASTIC CASE
NONDERATED CONTINUOUS VOLTAGE RATING AND TYPE PER SECTION
(CQWM) 3000.0 DC SINGLE SECTION
NONDERATED OPERATING TEMP
(CQJJ) -55.0 CELSIUS MINIMUM AND 85.0 CELSIUS MAXIMUM
QUALITY FACTOR AT REFERENCE TEMP
(CWQF) 1000.000
RELIABILITY INDICATOR
(AARG) NOT ESTABLISHED
SCHEMATIC DIAGRAM DESIGNATOR
(AEBZ) NO COMMON OR GROUNDED ELECTRODE(S)
TEMP COEFFICIENT OF CAPACITANCE PER SECTION IN PPM PER DEG CELSIUS
(CQLZ) 0.0 SINGLE SECTION
TERMINAL DIAMETER
(AEBT) 0.032 INCHES NOMINAL
TERMINAL LENGTH
(ABJT) 1.500 INCHES MINIMUM
TERMINAL SURFACE TREATMENT
(CWSG) SOLDER
TERMINAL TYPE AND QUANTITY
(TTQY) 2 UNINSULATED WIRE LEAD
TOLERANCE OF TEMP COEFFICIENT PER SECTION IN PPM PER DEG CELSIUS
(CRHD) -30.0 TO 30.0 SINGLE SECTION
TOLERANCE RANGE PER SECTION
(CRTP) -5.00 TO 5.00 PERCENT SINGLE SECTION
CASE MATERIAL
(CWJK) PLASTIC
III TEMP COEFFICIENT OF CAPACITANCE PER SECTION IN PPM PER DEG CELSIUS
(CQLZ) 0.0 SINGLE SECTION
TOLERANCE RANGE PER SECTION
(CRTP) -5.00/+5.00 PERCENT SINGLE SECTION
NONDERATED OPERATING TEMP
(CQJJ) -55.0 DEG CELSIUS MINIMUM AND 85.0 DEG CELSIUS MAXIMUM

Manufacturer Part Numbers


Related Inventory

EN6122C06-05H
Condition NE
UNIMATIC BLIND
Readily Available
HL441HC-06-05
Condition NE
HI-LOK PIN
Readily Available
EN6128C06-05H
Condition NE
CHERRY MAXIBOLT
Readily Available
NAS1921C06-05
Condition NE
BLIND RIVET
Readily Available
HL453UC-06-05
Condition NE
HI-LOK PIN
Readily Available
NAS1921C06-05W
Condition NE
BLIND RIVETS
Readily Available
NAS1919C06-05
Condition NE
BLIND RIVETS
Readily Available
EN6127C06-05H
Condition NE
CHERRY MAXIBOLT
Readily Available
NAS1919C06-05W
Condition NE
BLIND RIVETS
Readily Available
NAS1919C06-05P
Condition NE
BLIND RIVETS
Readily Available
C0605A

Condition NE
Carol C0605A co
Readily Available
54JK62
DC060500
Condition NE
Portable Air Co
Readily Available
492X21
HDLBC0605KA4S
Condition NE
Door Lockset: O
Readily Available
492X22
HDLBC0605KA4WK
Condition NE
Door Lockset: O
Readily Available
492X02
BCC0605KA4S
Condition NE
Door Lockset: O
Readily Available
492X07
TUC0605KA4
Condition NE
Door Lockset: O
Readily Available
492X20
HDLBC0605KA4
Condition NE
Door Lockset: O
Readily Available
492X01
BCC0605KA4
Condition NE
Door Lockset: O
Readily Available
1HEC5
TFC0605-100
Condition NE
Semi-Tubular Ri
Readily Available
1HBZ1
TAC0605-100
Condition NE
Semi-Tubular Ri
Readily Available
1HBU6
TBC0605-100
Condition NE
Semi-Tubular Ri
Readily Available
1HBN2
TSC0605-100
Condition NE
Semi-Tubular Ri
Readily Available
4.00CT4MA3U38AC06.05

Condition NE

Readily Available
S4931920C-06-05
Condition NE
HUCK GRIM PINS
Readily Available
S3L100C-06-05
Condition NE
AIRCRAFT LOCKBO
Readily Available
HL323HC-06-05
Condition NE
HI-LOK PIN
Readily Available
HL19HC-06-05
Condition NE
HI-LOK PIN
Readily Available
HL454UC-06-05
Condition NE
HI-LOK PIN
Readily Available
MS28932C06-05
Condition NE
FELT,MECHANICAL
Readily Available
EN6129C06-05H
Condition NE
CHERRY MAXIBOLT
Readily Available
PLT5270AC-06-05
Condition NE
VISU-LOK II FAS
Readily Available
HL440UC-06-05
Condition NE
HI-LOK PIN
Readily Available
ER824C060506
FITTING, SPECIA
Readily Available
NAS1454C06-0504(D)
Condition FN
ROD, THREADED
Readily Available
HL449UC-06-05
Condition NE
HI-LOK PIN
Readily Available
16C0605-825
6615-01-127-3160
FLIGHT CONTROL
Readily Available
MS28932C06-05
5330-01-659-2889
Condition NS
FELT
Readily Available
16C0605-825
Condition RP
AUTOPILOT CONTR
Request
MS14237C06-050
Condition FN
BUSHING
Request
NAS1919C06-05
NAS1919C06-05
Condition FN
UNIV.HD A-286 C
Request
NAS1921C06-05
NAS1921C06-05
Condition FN
100CTSK A-286 C
Request
NAS1921C06-05

Condition NE
Blind Rivet (Mi
Request


 
Top