ISO Group Logo
Defense and Aerospace
Supply Chain Partner
A Dynatech International Company


NSN 5910-01-043-6894, 5910010436894
Cancelled -> Replaced by 5910008226301

Federal Supply Classification
FSC 5910 - Capacitors
National Item Identification Number
NIIN 010436894
Codification Country
United States
Item Name Code
INC 00005
Criticality
(X) This item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
Hazardous Material Indicator Code
(P) There is no information in the HMIRS; however, the NSN is in an FSC in Table II of Federal Standard 313 and an MSDS may be required by the user. The requirement for an MSDS is dependent on a hazard determination of the supplier or the intended end use of the product.
Availability: Readily Available Qualified Suppliers: We have 1 qualified suppliers

Manufacture or supply this part?
Join our growing community of certified suppliers.

Let Us Know
  CALL ABOUT NSN 5910-01-043-6894
Our client representatives are standing by to help fulfill your request.

+1-321-773-5710

  REQUEST QUOTE for 5910-01-043-6894


Have a list that needs to be quoted? Upload it here.

DLMS® Summary

National Stock Number 5910-01-043-6894

National Stock Number (NSN) 5910-01-043-6894, or NIIN 010436894, (capacitor,fixed,mica dielectric) was assigned June 28, 1977 in the Federal Logistics Information System (FLIS). This NIIN is Available for Manual Assignment. This NSN replaces 3 stock numbers: 5910000080469, 5910008226301, 5910000625231.

There are 34 manufacturer part numbers associated with this NSN. 8 of those part number(s) are considered obsolete. The manufacturer part numbers were originally supplied by 7 suppliers. Today, 5 suppliers are listed as Active suppliers for this NSN. Of the active suppliers, there are no suppliers that are deemed design controlled or valid supply parts. ISO Group has several sources of supply for this NSN.

This part number has not been procured by the US Government in over 5 years.

This NSN is very common among different weapons systems, belonging to 126 different platforms.

There has been very little demand for this national stock number. The demand for this NSN originated from less than 5 countries. Based on a planned procurement review by the Primary Inventory Control Activity (PICA) on Aug 01, 2020, this NSN's acquisition method was noted as: Suitable for Competitive Acquisition. (Potential sources shall include dealers/distributors.) Acquisition of this part is controlled by QPL procedures. Valid AMCs: 1 and 2.

This NSN is assigned to Item Name Code (INC) 00005. [A CAPACITOR, WHOSE CAPACITANCE VALUE CANNOT BE ADJUSTED OR VARIED, HAVING NATURAL SHEET MICA OR RECONSTITUTED FLAKED MICA FORMED INTO SHEETS AS THE DIELECTRIC MATERIAL. IT MAY BE A SINGLE UNIT, OR CONSIST OF TWO OR MORE FIXED UNITS WHICH CANNOT BE SEPARATED.]. This item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. There is no information in the HMIRS; however, the NSN is in an FSC in Table II of Federal Standard 313 and an MSDS may be required by the user. The requirement for an MSDS is dependent on a hazard determination of the supplier or the intended end use of the product. NSN 5910010436894 does not contain precious metals.

This NSN is associated to Schedule B 8532290020: fixed capacitors, mica dielectric, nesoi. The Schedule B End Use is listed as electric apparatus.

This information was last updated on .


Technical Characteristics

UNABLE TO DECODE
(AAQL) UNABLE TO DECODE
OVERALL LENGTH
(ABHP) 0.400 INCHES MINIMUM AND 0.460 INCHES MAXIMUM
UNABLE TO DECODE
(ABMK) UNABLE TO DECODE
DISSIPATION FACTOR AT REFERENCE TEMP IN PERCENT
(CWPM) 0.0008
BODY HEIGHT
(ADAU) 0.095 INCHES MINIMUM AND 0.180 INCHES MAXIMUM
BODY LENGTH
(ADAQ) 0.400 INCHES MINIMUM AND 0.460 INCHES MAXIMUM
BODY STYLE
(AAQL) W/O MTG FACILITIES TERMINAL(S) ON ONE SURFACE
BODY WIDTH
(ADAT) 0.360 INCHES MAXIMUM
CAPACITANCE VALUE PER SECTION
(CQBQ) 100.000 PICOFARADS SINGLE SECTION
CASE MATERIAL
(CWJK) PLASTIC
CENTER TO CENTER DISTANCE BETWEEN TERMINALS PARALLEL TO LENGTH
(AEBP) 0.225 INCHES NOMINAL
INSULATION RESISTANCE AT MAXIMUM OPERATING TEMP
(CQBF) 5000.0 MEGOHMS
INSULATION RESISTANCE AT REFERENCE TEMP
(CWPK) 100000.0 MEGOHMS
NONDERATED CONTINUOUS VOLTAGE RATING AND TYPE PER SECTION
(CQWM) 500.0 DC SINGLE SECTION
NONDERATED OPERATING TEMP
(CQJJ) -55.0 DEG CELSIUS MINIMUM AND 150.0 DEG CELSIUS MAXIMUM
SCHEMATIC DIAGRAM DESIGNATOR
(AEBZ) NO COMMON OR GROUNDED ELECTRODE(S)
RELIABILITY FAILURE RATE LEVEL IN PERCENT
(AARH) 0.0100
RELIABILITY INDICATOR
(AARG) ESTABLISHED
TEST DATA DOCUMENT
(TEST) 81349-MIL-C-39001 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.).
TOLERANCE RANGE PER SECTION
(CRTP) -2.00 TO 2.00 PERCENT SINGLE SECTION
SPECIFICATION/STANDARD DATA
(ZZZK) 81349-MIL-C-39001/5 GOVERNMENT SPECIFICATION
TEMP COEFFICIENT OF CAPACITANCE RANGE PER SECTION IN PPM PER DEG CELSIUS
(CRDN) -0.0 TO 70.0 SINGLE SECTION
TERMINAL DIAMETER
(AEBT) 0.025 INCHES NOMINAL
TERMINAL LENGTH
(ABJT) 1.000 INCHES MINIMUM
TERMINAL SURFACE TREATMENT
(CWSG) SOLDER
TERMINAL TYPE AND QUANTITY
(TTQY) 2 UNINSULATED WIRE LEAD
UNABLE TO DECODE
(ABKW) UNABLE TO DECODE AND UNABLE TO DECODE
UNABLE TO DECODE
(ADAT) UNABLE TO DECODE
TOLERANCE RANGE PER SECTION
(CRTP) -2.00/+2.00 PERCENT SINGLE SECTION
UNABLE TO DECODE
(CQWM) UNABLE TO DECODE
UNABLE TO DECODE
(ADAU) UNABLE TO DECODE AND UNABLE TO DECODE
UNABLE TO DECODE
(CQBQ) UNABLE TO DECODE
UNABLE TO DECODE
(CQJJ) UNABLE TO DECODE AND UNABLE TO DECODE
UNABLE TO DECODE
(ABJT) UNABLE TO DECODE
UNABLE TO DECODE
(ADAQ) UNABLE TO DECODE AND UNABLE TO DECODE
UNABLE TO DECODE
(CWPK) UNABLE TO DECODE
UNABLE TO DECODE
(CWPM) UNABLE TO DECODE
UNABLE TO DECODE
(AEBT) UNABLE TO DECODE
III INSULATION RESISTANCE AT MAXIMUM OPERATING TEMP
(CQBF) 5000.0 MEGOHMS
UNABLE TO DECODE
(CWJK) UNABLE TO DECODE
UNABLE TO DECODE
(AARG) UNABLE TO DECODE
UNABLE TO DECODE
(AARH) UNABLE TO DECODE
OVERALL WIDTH (NON-CORE)
(ABMK) 0.485 INCHES MAXIMUM
UNABLE TO DECODE
(AEBP) UNABLE TO DECODE
UNABLE TO DECODE
(AEBZ) UNABLE TO DECODE
III TERMINAL SURFACE TREATMENT
(CWSG) SOLDER
UNABLE TO DECODE
(ABHP) UNABLE TO DECODE AND UNABLE TO DECODE
TEMP COEFFICIENT OF CAPACITANCE RANGE PER SECTION IN PPM PER DEG CELSIUS
(CRDN) -0.0/+70.0 SINGLE SECTION
UNABLE TO DECODE
(CRDN) UNABLE TO DECODE
UNABLE TO DECODE
(CRTP) UNABLE TO DECODE
UNABLE TO DECODE
(TEST) UNABLE TO DECODE
UNABLE TO DECODE
(TTQY) UNABLE TO DECODE
UNABLE TO DECODE
(CWSG) UNABLE TO DECODE
OVERALL HEIGHT (NON-CORE)
(ABKW) 0.095 INCHES MINIMUM AND 0.180 INCHES MAXIMUM
UNABLE TO DECODE
(CQBF) UNABLE TO DECODE
UNABLE TO DECODE
(ZZZK) UNABLE TO DECODE

Manufacturer Part Numbers

1500007700

RNCC
C
RNVC
1
1JC813523

RNCC
C
RNVC
1
88700101

RNCC
C
RNVC
1
9122096490

RNCC
C
RNVC
1
9122096500

RNCC
C
RNVC
1
CM05C101KP3

RNCC
C
RNVC
1
CM05CD101JP3

RNCC
5
RNVC
9
CM05CD101KP3

RNCC
C
RNVC
1
CM05D101KP3

RNCC
C
RNVC
1
CM05DD101GP3

RNCC
C
RNVC
1
CM05DD101JP3

RNCC
C
RNVC
1
CM05DM101JP3

RNCC
5
RNVC
9
CM05E101GP3

RNCC
C
RNVC
1
CM05F101GP3

RNCC
C
RNVC
1
CM05F101JP3

RNCC
C
RNVC
1
CM05FC101GP3

RNCC
C
RNVC
1
CM05FD101GP3

RNCC
C
RNVC
1
CM05FD101GP3

RNCC
5
RNVC
9
CM06FD101JP3

RNCC
C
RNVC
1
CM10FD101GP3

RNCC
E
RNVC
8
CMP05F101PPDL

RNCC
C
RNVC
1
CMR05101GPDM

RNCC
C
RNVC
1
CMR05E101JPDP

RNCC
C
RNVC
1
CMR05E101JPDR

RNCC
C
RNVC
1
CMR05F101GPDL

RNCC
5
RNVC
9
CMR05F101GPDR

RNCC
2
RNVC
2
CMR05F101JPDL

RNCC
C
RNVC
1
CMR05F101JPDP

RNCC
5
RNVC
9
CMR05F101JPDR

RNCC
5
RNVC
9
DM15F101JP

RNCC
C
RNVC
1
MILC390015

RNCC
5
RNVC
9
MILC518

RNCC
5
RNVC
9
VTDM15F101J

RNCC
C
RNVC
1
MILPRF390015

RNCC
4
RNVC
1
5910PL0316989

RNCC
6
RNVC
9

Related Inventory

887001016E
Condition FN
SHAFT-AXLE FIN.
Readily Available
887001015E
Condition FN
SHAFT-AXLE FIN.
Readily Available


 
Top