ISO Group Logo
Defense and Aerospace
Supply Chain Partner
A Dynatech International Company


NSN 5910-01-047-6955, 5910010476955
CAPACITOR,FIXED,CERAMIC DIELECTRIC

Federal Supply Classification
FSC 5910 - Capacitors
National Item Identification Number
NIIN 010476955
Codification Country
United States
Item Name Code
INC 00007
Criticality
(X) This item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
Hazardous Material Indicator Code
(P) There is no information in the HMIRS; however, the NSN is in an FSC in Table II of Federal Standard 313 and an MSDS may be required by the user. The requirement for an MSDS is dependent on a hazard determination of the supplier or the intended end use of the product.
Availability: Request Qualified Suppliers: We have 1 qualified suppliers

Manufacture or supply this part?
Join our growing community of certified suppliers.

Let Us Know
  CALL ABOUT NSN 5910-01-047-6955
Our client representatives are standing by to help fulfill your request.

+1-321-773-5710

  REQUEST QUOTE for 5910-01-047-6955


Have a list that needs to be quoted? Upload it here.

DLMS® Summary

National Stock Number 5910-01-047-6955

National Stock Number (NSN) 5910-01-047-6955, or NIIN 010476955, (capacitor,fixed,ceramic dielectric) was assigned September 12, 1977 in the Federal Logistics Information System (FLIS). NIIN 010476955 was cancelled on March 29, 2017, with a cancelled status of "Item is Cancelled - USE." This NSN was replaced by NSN 5910012160874. This NSN does not replace any other NSNs.

There are no manufacturer part numbers associated to this NSN. ISO Group has several sources of supply for this NSN.

This part number has not been procured by the US Government in over 5 years.

This NSN is assigned to Item Name Code (INC) 00007. [A CAPACITOR, WHOSE CAPACITANCE VALUE CANNOT BE ADJUSTED OR VARIED, HAVING A CERAMIC DIELECTRIC. IT MAY BE A SINGLE UNIT, OR CONSIST OF TWO OR MORE FIXED UNITS WHICH CANNOT BE SEPARATED.]. This item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. There is no information in the HMIRS; however, the NSN is in an FSC in Table II of Federal Standard 313 and an MSDS may be required by the user. The requirement for an MSDS is dependent on a hazard determination of the supplier or the intended end use of the product. NSN 5910010476955 contains an unknown precious metal.

This information was last updated on .


Technical Characteristics

UNABLE TO DECODE
(CQLZ) UNABLE TO DECODE
UNABLE TO DECODE
(CRTP) UNABLE TO DECODE
TEST DATA DOCUMENT
(TEST) 81349-MIL-C-20 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.).
CENTER TO CENTER DISTANCE BETWEEN TERMINALS PARALLEL TO LENGTH
(AEBP) 0.200 INCHES NOMINAL
TERMINAL DIAMETER
(AEBT) 0.020 INCHES MINIMUM AND 0.027 INCHES MAXIMUM
UNABLE TO DECODE
(CQWM) UNABLE TO DECODE
TERMINAL LENGTH
(ABJT) 1.250 INCHES MINIMUM
BODY WIDTH
(ADAT) 0.190 INCHES NOMINAL
NONDERATED OPERATING TEMP
(CQJJ) -55.0 DEG CELSIUS MINIMUM AND 125.0 DEG CELSIUS MAXIMUM
UNABLE TO DECODE
(CWPK) UNABLE TO DECODE
UNABLE TO DECODE
(CWPM) UNABLE TO DECODE
UNABLE TO DECODE
(AEBT) UNABLE TO DECODE AND UNABLE TO DECODE
SCHEMATIC DIAGRAM DESIGNATOR
(AEBZ) NO COMMON OR GROUNDED ELECTRODE(S)
UNABLE TO DECODE
(CQBF) UNABLE TO DECODE
III TEMP COEFFICIENT OF CAPACITANCE PER SECTION IN PPM PER DEG CELSIUS
(CQLZ) 0.0 SINGLE SECTION
BODY HEIGHT
(ADAU) 0.090 INCHES NOMINAL
CAPACITANCE VALUE PER SECTION
(CQBQ) 2700.000 PICOFARADS SINGLE SECTION
TOLERANCE RANGE PER SECTION
(CRTP) -2.00/+2.00 PERCENT SINGLE SECTION
CASE MATERIAL
(CWJK) PLASTIC
SPECIFICATION/STANDARD DATA
(ZZZK) 81349-MIL-C-20/35 GOVERNMENT SPECIFICATION
UNABLE TO DECODE
(AAQL) UNABLE TO DECODE
UNABLE TO DECODE
(AARH) UNABLE TO DECODE
UNABLE TO DECODE
(ABHP) UNABLE TO DECODE
UNABLE TO DECODE
(AEBP) UNABLE TO DECODE
RELIABILITY INDICATOR
(AARG) ESTABLISHED
UNABLE TO DECODE
(ABJT) UNABLE TO DECODE
UNABLE TO DECODE
(CQJJ) UNABLE TO DECODE AND UNABLE TO DECODE
UNABLE TO DECODE
(CRHD) UNABLE TO DECODE
DISSIPATION FACTOR AT REFERENCE TEMP IN PERCENT
(CWPM) 0.1500
UNABLE TO DECODE
(TEST) UNABLE TO DECODE
BODY STYLE
(AAQL) W/O MTG FACILITIES TERMINAL(S) ON ONE SURFACE
UNABLE TO DECODE
(AARG) UNABLE TO DECODE
RELIABILITY FAILURE RATE LEVEL IN PERCENT
(AARH) 0.1000
UNABLE TO DECODE
(AEBZ) UNABLE TO DECODE
UNABLE TO DECODE
(CWQF) UNABLE TO DECODE
UNABLE TO DECODE
(CWSG) UNABLE TO DECODE
BODY LENGTH
(ADAQ) 0.190 INCHES NOMINAL
UNABLE TO DECODE
(ADAT) UNABLE TO DECODE
UNABLE TO DECODE
(ADAU) UNABLE TO DECODE
TEMP COEFFICIENT OF CAPACITANCE PER SECTION IN PPM PER DEG CELSIUS
(CQLZ) 0.0 SINGLE SECTION
QUALITY FACTOR AT REFERENCE TEMP
(CWQF) 1000.0000
TERMINAL SURFACE TREATMENT
(CWSG) SOLDER
TERMINAL TYPE AND QUANTITY
(TTQY) 2 UNINSULATED WIRE LEAD
UNABLE TO DECODE
(CQBQ) UNABLE TO DECODE
TOLERANCE OF TEMP COEFFICIENT PER SECTION IN PPM PER DEG CELSIUS
(CRHD) -30.0/+30.0 SINGLE SECTION
UNABLE TO DECODE
(TTQY) UNABLE TO DECODE
UNABLE TO DECODE
(ZZZK) UNABLE TO DECODE
UNABLE TO DECODE
(ABMK) UNABLE TO DECODE
NONDERATED CONTINUOUS VOLTAGE RATING AND TYPE PER SECTION
(CQWM) 50.0 DC SINGLE SECTION
UNABLE TO DECODE
(ADAQ) UNABLE TO DECODE
INSULATION RESISTANCE AT MAXIMUM OPERATING TEMP
(CQBF) 10000.0 MEGOHMS
UNABLE TO DECODE
(CWJK) UNABLE TO DECODE
INSULATION RESISTANCE AT REFERENCE TEMP
(CWPK) 100000.0 MEGOHMS

Manufacturer Part Numbers


Related Inventory



 
Top