NSN 5910-01-066-4891, 5910010664891
CAPACITOR,FIXED,CERAMIC DIELECTR

Federal Supply Classification: FSC 5910 - Capacitors
National Item Identification Number: NIIN 010664891
Codification Country: United States
Item Name Code: INC 00007
Criticality: (X) This item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
Hazardous Material Indicator Code: (P) There is no information in the HMIRS; however, the NSN is in an FSC in Table II of Federal Standard 313 and an MSDS may be required by the user. The requirement for an MSDS is dependent on a hazard determination of the supplier or the intended end use of the product.

Availability: Readily Available Qualified Suppliers: Currently qualifying suppliers

Manufacture or supply this part?
Join our growing community of certified suppliers.

Let Us Know

CALL ABOUT NSN 5910-01-066-4891

Our client representatives are standing by to help fulfill your request.

+1-321-773-5710

REQUEST QUOTE for 5910-01-066-4891

Have a list that needs to be quoted? Upload it here.

Upload a List

DLMS^® Summary

National Stock Number 5910-01-066-4891

National Stock Number (NSN) 5910-01-066-4891, or NIIN 010664891, (capacitor,fixed,ceramic dielectr) was assigned October 12, 1978 in the Federal Logistics Information System (FLIS). This NIIN is Available for Manual Assignment. This NSN does not replace any other NSNs.

There are 3 manufacturer part numbers associated with this NSN. One of those part number(s) are considered obsolete. The manufacturer part numbers were originally supplied by 2 suppliers. Today, one supplier is listed as an Active supplier for this NSN. Of the active suppliers, only one supplier is deemed design controlled or valid supply parts.

This part number has not been procured by the US Government in over 5 years.

This NSN is assigned to Item Name Code (INC) 00007. [A CAPACITOR, WHOSE CAPACITANCE VALUE CANNOT BE ADJUSTED OR VARIED, HAVING A CERAMIC DIELECTRIC. IT MAY BE A SINGLE UNIT, OR CONSIST OF TWO OR MORE FIXED UNITS WHICH CANNOT BE SEPARATED.]. This item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. There is no information in the HMIRS; however, the NSN is in an FSC in Table II of Federal Standard 313 and an MSDS may be required by the user. The requirement for an MSDS is dependent on a hazard determination of the supplier or the intended end use of the product. NSN 5910010664891 contains an unknown precious metal.

This NSN is associated to Schedule B 8532290040: fixed capacitors, nesoi. The Schedule B End Use is listed as electric apparatus.

This information was last updated on May 01, 2025.

Technical Characteristics

III TEMP COEFFICIENT OF CAPACITANCE PER SECTION IN PPM PER DEG CELSIUS: (CQLZ) 0.0 SINGLE SECTION
TOLERANCE RANGE PER SECTION: (CRTP) -5.00/+5.00 PERCENT SINGLE SECTION
BODY HEIGHT: (ADAU) 0.100 INCHES MAXIMUM
BODY LENGTH: (ADAQ) 0.150 INCHES MAXIMUM
BODY STYLE: (AAQL) W/O MTG FACILITIES TERMINAL(S) ON ONE SURFACE
BODY WIDTH: (ADAT) 0.150 INCHES MAXIMUM
CAPACITANCE VALUE PER SECTION: (CQBQ) 47.000 PICOFARADS SINGLE SECTION
CENTER TO CENTER DISTANCE BETWEEN TERMINALS PARALLEL TO LENGTH: (AEBP) 0.100 INCHES NOMINAL
DISSIPATION FACTOR AT REFERENCE TEMP IN PERCENT: (CWPM) 0.1500
INSULATION RESISTANCE AT REFERENCE TEMP: (CWPK) 100000.0 MEGOHMS
MATERIAL: (MATT) PLASTIC CASE
NONDERATED CONTINUOUS VOLTAGE RATING AND TYPE PER SECTION: (CQWM) 100.0 DC SINGLE SECTION
NONDERATED OPERATING TEMP: (CQJJ) -55.0 CELSIUS MINIMUM AND 125.0 CELSIUS MAXIMUM
RELIABILITY INDICATOR: (AARG) NOT ESTABLISHED
SCHEMATIC DIAGRAM DESIGNATOR: (AEBZ) NO COMMON OR GROUNDED ELECTRODE(S)
TEMP COEFFICIENT OF CAPACITANCE PER SECTION IN PPM PER DEG CELSIUS: (CQLZ) 0.0 SINGLE SECTION
TERMINAL LENGTH: (ABJT) 1.250 INCHES MINIMUM
TERMINAL TYPE AND QUANTITY: (TTQY) 2 UNINSULATED WIRE LEAD
TOLERANCE OF TEMP COEFFICIENT PER SECTION IN PPM PER DEG CELSIUS: (CRHD) -30.0 TO 30.0 SINGLE SECTION
TOLERANCE RANGE PER SECTION: (CRTP) -5.00 TO 5.00 PERCENT SINGLE SECTION
TOLERANCE OF TEMP COEFFICIENT PER SECTION IN PPM PER DEG CELSIUS: (CRHD) -30.0/+30.0 SINGLE SECTION
CASE MATERIAL: (CWJK) PLASTIC
NONDERATED OPERATING TEMP: (CQJJ) -55.0 DEG CELSIUS MINIMUM AND 125.0 DEG CELSIUS MAXIMUM