ISO Group Logo
Defense and Aerospace
Supply Chain Partner
A Dynatech International Company


NSN 5910-01-085-8061, 5910010858061
Cancelled -> Replaced by 5910010858060

Federal Supply Classification
FSC 5910 - Capacitors
National Item Identification Number
NIIN 010858061
Codification Country
United States
Item Name Code
INC 00008
Criticality
(X) This item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
Hazardous Material Indicator Code
(P) There is no information in the HMIRS; however, the NSN is in an FSC in Table II of Federal Standard 313 and an MSDS may be required by the user. The requirement for an MSDS is dependent on a hazard determination of the supplier or the intended end use of the product.
Availability: Readily Available Qualified Suppliers: Currently qualifying suppliers

Manufacture or supply this part?
Join our growing community of certified suppliers.

Let Us Know
  CALL ABOUT NSN 5910-01-085-8061
Our client representatives are standing by to help fulfill your request.

+1-321-773-5710

  REQUEST QUOTE for 5910-01-085-8061


Have a list that needs to be quoted? Upload it here.

DLMS® Summary

National Stock Number 5910-01-085-8061

National Stock Number (NSN) 5910-01-085-8061, or NIIN 010858061, (capacitor,fixed,electrolytic) was assigned November 16, 1979 in the Federal Logistics Information System (FLIS). This NIIN is Available for Manual Assignment. This NSN replaces 1 stock number, 5910010858060.

There are 3 manufacturer part numbers associated with this NSN. One of those part number(s) are considered obsolete. The manufacturer part numbers were originally supplied by 2 suppliers. Today, 2 suppliers are listed as Active suppliers for this NSN. Of the active suppliers, only one supplier is deemed design controlled or valid supply parts.

This part number has not been procured by the US Government in over 5 years.

This NSN is unique to one weapons system.

Based on a planned procurement review by the Primary Inventory Control Activity (PICA) on Jun 02, 2006, this NSN's acquisition method was noted as: Acquire directly from the actual manufacturer, whether or not the prime contractor is the actual manufacturer. The annual buy value of this part falls below the screening threshold of $10,000 but it has been screened for known source(s). (NOTE: This code shall not be used when screening parts entering the inventory. It shall not be assigned in preference to or supersede any other AMSC.) Valid AMCs: 1, 2, 3, 4 and 5.

This NSN is assigned to Item Name Code (INC) 00008. [A CAPACITOR, WHOSE CAPACITANCE VALUE CANNOT BE ADJUSTED OR VARIED, HAVING A CHEMICALLY FORMED FILM AS THE DIELECTRIC. IT MAY BE A SINGLE UNIT, OR CONSIST OF TWO OR MORE FIXED UNITS WHICH CANNOT BE SEPARATED.]. This item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. There is no information in the HMIRS; however, the NSN is in an FSC in Table II of Federal Standard 313 and an MSDS may be required by the user. The requirement for an MSDS is dependent on a hazard determination of the supplier or the intended end use of the product. NSN 5910010858061 contains an unknown precious metal.

This NSN is associated to Schedule B 8532290040: fixed capacitors, nesoi. The Schedule B End Use is listed as electric apparatus.

This information was last updated on .


Technical Characteristics

UNABLE TO DECODE
(ABKW) UNABLE TO DECODE
CASE MATERIAL
(CWJK) METAL
UNABLE TO DECODE
(ABMK) UNABLE TO DECODE
TOLERANCE RANGE PER SECTION
(CRTP) -20.00/+20.00 PERCENT SINGLE SECTION
ELECTRICAL POLARIZATION
(AECQ) POLARIZED
ANODE TYPE
(AECE) PLAIN FOIL
BODY DIAMETER
(ABPM) 0.248 INCHES MAXIMUM
BODY LENGTH
(ADAQ) 0.481 INCHES MAXIMUM
BODY STYLE
(AAQL) W/O MTG FACILITIES, TERMINAL(S) ON ONE END
CAPACITANCE VALUE PER SECTION
(CQBQ) 4.700 MICROFARADS SINGLE SECTION
CAPACITIVE ELECTRODE MATERIAL
(CWNJ) ALUMINUM
CASE INSULATION MATERIAL
(CWSZ) PLASTIC
CENTER TO CENTER DISTANCE BETWEEN TERMINALS PARALLEL TO DIAMETER
(AEBS) 0.197 INCHES NOMINAL
DC LEAKAGE AT REFERENCE TEMP
(CWQH) 3.000 MICROAMPERES
DISSIPATION FACTOR AT REFERENCE TEMP IN PERCENT
(CWPM) 0.1000
EQUIVALENT SERIES RESISTANCE AT REFERENCE TEMP IN OHMS
(CWQC) 35.30
NONDERATED CONTINUOUS VOLTAGE RATING AND TYPE PER SECTION
(CQWM) 50.0 DC SINGLE SECTION
NONDERATED OPERATING TEMP
(CQJJ) -40.0 CELSIUS MINIMUM AND 85.0 CELSIUS MAXIMUM
RELIABILITY INDICATOR
(AARG) NOT ESTABLISHED
SCHEMATIC DIAGRAM DESIGNATOR
(AEBZ) NO COMMON OR GROUNDED ELECTRODE(S)
TERMINAL DIAMETER
(AEBT) 0.024 INCHES NOMINAL
TERMINAL LENGTH
(ABJT) 0.787 INCHES MINIMUM
TERMINAL TYPE AND QUANTITY
(TTQY) 2 UNINSULATED WIRE LEAD
TERMINAL SURFACE TREATMENT
(CWSG) SOLDER
TOLERANCE RANGE PER SECTION
(CRTP) -20.00 TO 20.00 PERCENT SINGLE SECTION
NONDERATED OPERATING TEMP
(CQJJ) -40.0 DEG CELSIUS MINIMUM AND 85.0 DEG CELSIUS MAXIMUM

Manufacturer Part Numbers


Related Inventory

2.322730411e+011
Readily Available
2.3227304175e+011
Readily Available
2.3227304148e+011
Readily Available
CR2273-04-04
Condition NE
CHERRYLOK 'A' R
Readily Available
2.3227304133e+011
Readily Available
CR2273-04-03
Condition NE
CHERRYLOK 'A' R
Readily Available
2.3227304151e+011
Readily Available
CR2273-04-05
Condition NE
CHERRYLOK 'A' R
Readily Available
CR2273-04-06
Condition NE
CHERRYLOK 'A' R
Readily Available
G2273041
233102
Condition NE
Silicon Carbide
Readily Available
N2273-25GM
N2273-04
Condition NE
p-Nitrophenyl P
Readily Available
M2273-25G
TCI-M2273-04
Condition NE
Mebendazole, al
Readily Available
22730402
MM22730402
Condition NE
Minuteman Power
Readily Available
CR2273-04-02
Condition NE
CHERRYLOK 'A' R
Readily Available
2273040-1
Condition FN
M12 x 1.0 strai
Readily Available
2273049-1
Condition FN
M12 x 1.0 strai
Readily Available
2273049-3
Condition FN
M12 x 1.0 strai
Readily Available
2273047-3
Condition FN
M12 x 1.0 strai
Readily Available
2273047-1
Condition FN
M12 x 1.0 strai
Readily Available
2273045-3
Condition FN
M12 x 1.0 strai
Readily Available
2273045-1
Condition FN
M12 x 1.0 strai
Readily Available
2273043-3
Condition FN
M12 x 1.0 strai
Readily Available
2273043-1
Condition FN
M12 x 1.0 strai
Readily Available
1-2273047-3
Condition FN
M12 x 1.0 strai
Readily Available
1-2273047-1
Condition FN
M12 x 1.0 strai
Readily Available
1-2273045-3
Condition FN
M12 x 1.0 strai
Readily Available
1-2273043-3
Condition FN
M12 x 1.0 strai
Readily Available
1-2273043-1
Condition FN
M12 x 1.0 strai
Readily Available
2273041-3
Condition FN
M12 x 1.0 strai
Readily Available
2273041-1
Condition FN
M12 x 1.0 strai
Readily Available
1-2273046-3
Condition FN
M12 x 1.0 strai
Readily Available
1-2273046-1
Condition FN
M12 x 1.0 strai
Readily Available
1-2273044-3
Condition FN
M12 x 1.0 strai
Readily Available
1-2273044-1
Condition FN
M12 x 1.0 strai
Readily Available
1-2273042-3
Condition FN
M12 x 1.0 strai
Readily Available
1-2273042-1
Condition FN
M12 x 1.0 strai
Readily Available
2273048-3
Condition FN
M12 x 1.0 strai
Readily Available
2273046-3
Condition FN
M12 x 1.0 strai
Readily Available
2273046-1
Condition FN
M12 x 1.0 strai
Readily Available
2273044-3
Condition FN
M12 x 1.0 strai
Readily Available
2273044-1
Condition FN
M12 x 1.0 strai
Readily Available
2273042-3
Condition FN
M12 x 1.0 strai
Readily Available
2273042-1
Condition FN
M12 x 1.0 strai
Readily Available
2273040-3
Condition FN
M12 x 1.0 strai
Readily Available
2273048-1
Condition FN
M12 x 1.0 strai
Readily Available
1-2273045-1
Condition FN
M12 x 1.0 strai
Readily Available
9227304
GUARD ASM
Readily Available


 
Top