ISO Group Logo
Defense and Aerospace
Supply Chain Partner
A Dynatech International Company


NSN 5910-01-226-5727, 5910012265727
Cancelled -> Replaced by 5910012127851

Federal Supply Classification
FSC 5910 - Capacitors
National Item Identification Number
NIIN 012265727
Codification Country
United States
Item Name Code
INC 31959
Criticality
(X) This item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
Hazardous Material Indicator Code
(P) There is no information in the HMIRS; however, the NSN is in an FSC in Table II of Federal Standard 313 and an MSDS may be required by the user. The requirement for an MSDS is dependent on a hazard determination of the supplier or the intended end use of the product.
Availability: In Stock Qualified Suppliers: We have 1 qualified suppliers

Manufacture or supply this part?
Join our growing community of certified suppliers.

Let Us Know
  CALL ABOUT NSN 5910-01-226-5727
Our client representatives are standing by to help fulfill your request.

+1-321-773-5710

  REQUEST QUOTE for 5910-01-226-5727


Have a list that needs to be quoted? Upload it here.

DLMS® Summary

National Stock Number 5910-01-226-5727

National Stock Number (NSN) 5910-01-226-5727, or NIIN 012265727, (capacitor,fixed,metallized,paper) was assigned February 20, 1986 in the Federal Logistics Information System (FLIS). This NIIN is Available for Manual Assignment. This NSN replaces 4 stock numbers: 5910009516766, 5910010832084, 5910012127851, 5910002422581.

There are 10 manufacturer part numbers associated with this NSN. 5 of those part number(s) are considered obsolete. The manufacturer part numbers were originally supplied by 3 suppliers. Today, one supplier is listed as an Active supplier for this NSN. Of the active suppliers, there are no suppliers that are deemed design controlled or valid supply parts. ISO Group has several sources of supply for this NSN.

This part number has not been procured by the US Government in over 5 years, with the most recent procurement date of Jun 16, 2017. There have been 2 contracts issued for this part number, with 2 awards given. The US Government has only awarded those contracts to one supplier. The last contract numbers awarded were: SPE7M517V6845, SPM7M110VZ413. The total value of the awarded contracts has been US$ 2,319.43.

This NSN is somewhat common among different platforms, belonging to 8 different weapons systems.

There has been very little demand for this national stock number. The demand for this NSN originated from less than 5 countries. The 24 month forecast from the US Government for this part number has high volatility, with an estimated forecasted value of US$ 2,409. Based on a planned procurement review by the Primary Inventory Control Activity (PICA) on Jun 02, 2006, this NSN's acquisition method was noted as: Suitable for Competitive Acquisition. (Potential sources shall include dealers/distributors.) Acquisition of this part is controlled by QPL procedures. Valid AMCs: 1 and 2.

This NSN is assigned to Item Name Code (INC) 31959. [A CAPACITOR WHOSE CAPACITANCE VALUE CANNOT BE ADJUSTED OR VARIED HAVING PAPER, PLASTIC, OR ANY COMBINATION OF PAPER AND PLASTIC AS THE DIELECTRIC MATERIAL WITH A METALLIC FILM DEPOSITED THEREON. IT MAY BE A SINGLE UNIT OR CONSIST OF TWO OR MORE UNITS WHICH CANNOT BE SEPARATED.]. This item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. There is no information in the HMIRS; however, the NSN is in an FSC in Table II of Federal Standard 313 and an MSDS may be required by the user. The requirement for an MSDS is dependent on a hazard determination of the supplier or the intended end use of the product. NSN 5910012265727 does not contain precious metals.

This NSN is associated to Schedule B 8532290040: fixed capacitors, nesoi. The Schedule B End Use is listed as electric apparatus.

This information was last updated on .


Technical Characteristics

TERMINAL TYPE AND QUANTITY
(TTQY) 2 UNINSULATED WIRE LEAD
DISSIPATION FACTOR AT REFERENCE TEMP IN PERCENT
(CWPM) 0.1500
BODY DIAMETER
(ABPM) 0.265 INCHES MAXIMUM
BODY LENGTH
(ADAQ) 0.687 INCHES NOMINAL
BODY STYLE
(AAQL) W/O MTG FACILITIES, AXIAL TERMINALS
CAPACITANCE VALUE PER SECTION
(CQBQ) 0.120 MICROFARADS SINGLE SECTION
CASE INSULATION MATERIAL
(CWSZ) PLASTIC
CASE MATERIAL
(CWJK) METAL
FEATURES PROVIDED
(CBBL) HERMETICALLY SEALED CASE
INSULATION RESISTANCE AT MAXIMUM OPERATING TEMP
(CQBF) 300000.0 MEGOHMS
INSULATION RESISTANCE AT REFERENCE TEMP
(CWPK) 3000000.0 MEGOHMS
NONDERATED CONTINUOUS VOLTAGE RATING AND TYPE PER SECTION
(CQWM) 50.0 DC SINGLE SECTION
NONDERATED OPERATING TEMP
(CQJJ) -65.0 DEG CELSIUS MINIMUM AND 100.0 DEG CELSIUS MAXIMUM
SCHEMATIC DIAGRAM DESIGNATOR
(AEBZ) NO COMMON OR GROUNDED ELECTRODE(S)
RELIABILITY FAILURE RATE LEVEL IN PERCENT
(AARH) 0.0010
RELIABILITY INDICATOR
(AARG) ESTABLISHED
TEST DATA DOCUMENT
(TEST) 81349-MIL-C-83421 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.).
TOLERANCE RANGE PER SECTION
(CRTP) -5.00 TO 5.00 PERCENT SINGLE SECTION
SPECIFICATION/STANDARD DATA
(ZZZK) 81349-MIL-C-83421/1 GOVERNMENT SPECIFICATION
TERMINAL DIAMETER
(AEBT) 0.032 INCHES NOMINAL
TERMINAL LENGTH
(ABJT) 1.625 INCHES MINIMUM
TERMINAL SURFACE TREATMENT
(CWSG) SOLDER
TOLERANCE RANGE PER SECTION
(CRTP) -5.00/+5.00 PERCENT SINGLE SECTION

Manufacturer Part Numbers


Related Inventory

MS21919WDG12
Condition NE
CLAMP
In Stock
MS21919WDG6
Condition NE
CLAMP
In Stock
MS21919WH3
Condition NE
CLAMP
In Stock
MS21919WH7
Condition NE
CLAMP
In Stock
MS21919WDG11
Condition NE
CLAMP
In Stock
MS21919WDG7
Condition NE
CLAMP
In Stock
MS21919H48
Condition NE
CLAMP
In Stock
7671CMS16562-191
5315-00-058-9698
Condition NE
PIN,SPRING
Readily Available
2191694
Condition NS
DAMPER, TURBINE
Readily Available
MS16219-1 REV A
5305-01-174-6070
Screw
Readily Available
NAS21-2-191
Readily Available
ARB2219-1
Condition FN
CLIP 2617
Readily Available
114T0219-1
Condition FN
SEAL 62
Readily Available
161A1219-1
Condition FN
SLEEVE 279
Readily Available
411T1219-1
Condition FN
EDGE 95
Readily Available
5330-00-178-2191
8105
Seal
Readily Available
2191QUX1-24V
Lamp
Readily Available
MS16562-191
SPRING PIN
Readily Available
7671CSAS2191
Condition NE
SCREW,HEX HD CA
Readily Available
2191-440-A-7
Condition FN
HEX FEMALE STAN
Readily Available
MS16562-191
5315-00-889-2591
Pin
Readily Available
7671CM39029-22-191
Condition NE
PIN,CONTACT
Readily Available
2191QL5-24V
Readily Available
652191
Condition NS
GASKET
Readily Available
2910-01-189-2191
011892191.2910
Condition NS
LEVER,REMOTE CO
Readily Available
3040-01-139-2191
011392191.3040
Condition NS
SHAFT
Readily Available
902191
2 50 M CABLE ME
Readily Available
219-1020
Condition NS
A/C PART
Readily Available
7671CNAS1191-06P6LH
5305-01-250-2191
Condition NE
SCREW,SOC HEAD
Readily Available
114-530219-1
Condition NS
PLACARD
Readily Available
4919219-1
Condition NS
INSIGNIA
Readily Available
219-1
Condition NS
LAMP HOLDER
Readily Available
7671CSAS12191
Condition NE
PIN
Readily Available
21914-001
Condition NS
PIN
Readily Available
2191836
Condition NS
GASKET, SPRING
Readily Available
2191L1-6V
Readily Available
21917-0003
Condition NE
ISOLATOR
Readily Available
2540-01-447-2191
014472191.2540
Condition NS
SEAT, BELT
Readily Available
219136
ADAPTER CRANKSH
Readily Available
9072191
COVER
Readily Available
2191-440-AL-7
Condition FN
Hex Female Stan
Readily Available
7671C9098307
5315-01-321-2191
Condition NE
PIN, HOLLOW
Readily Available
25TE4219-1
Condition NS
SHIM
Readily Available
219105
VALVE AIR STAR
Readily Available
7671CDAA3131D112-191
Condition NE
WEDGE
Readily Available
4820-01-184-2191
011842191.4820
Condition NS
PLUG, VALVE
Readily Available
2520-01-208-2191
012082191.2520
Condition NS
SHIFTER FORK
Readily Available
ER2-191
Condition NS
CARBATIOR
Readily Available
SPE.2191
Condition AR
TRUCK, TRACTOR
Readily Available
0410219-1
Condition NS
SEAT RAIL
Readily Available
0541219-1
Condition NS
DOUBLER
Readily Available
0861219-1
Condition NS
RETAINER
Readily Available
1470219-1
Condition NS
SCOOP
Readily Available
3219-1
Condition NS
PAWL
Readily Available
AN3219-1
Condition NS
KNOB AVIONIC CO
Readily Available
HS5083-2191
Condition FN
Readily Available
ST3402-191
STUD
Readily Available
2191844-01
Condition AR
TUBE ASSEMBLY,
Readily Available
701219-1
Condition AR
PISTON, MAGNET,
Readily Available
2191029
ZQE MNFLD-EXH
Readily Available
4962191
GEAR
Readily Available
73112191
HANDLE
Readily Available
9052191
WASHER
Readily Available
10-AB0219-1
Condition FN
NET
Readily Available
113W1021-91
Condition FN
PIN
Readily Available
219177
Condition FN
HEAD ASSY RT402
Readily Available
219175
Condition FN
COVER -, IMPELL
Readily Available
219174
Condition FN
RT402 NS 456
Readily Available
219173
Condition FN
HEAD ASSY NS
Readily Available
219171
Condition FN
OIL PUMP DR GR
Readily Available
219170
Condition FN
PMP DRV GEAR, N
Readily Available
219168
Condition FN
COVER PLATE
Readily Available
219167
Condition FN
SHAFT
Readily Available
219166
Condition FN
PMP DR SLEEVE
Readily Available
219162
Condition FN
IMP HUB N1
Readily Available
219160
Condition FN
BRG CARR
Readily Available
219158
Condition FN
SHIM
Readily Available
219157
Condition FN
SHIM
Readily Available
219156
Condition FN
SHIM
Readily Available
219155
Condition FN
GR. HS. ADAPTOR
Readily Available
219154
Condition FN
OIL TUBE
Readily Available
219153
Condition FN
SLEEVE
Readily Available
219152
Condition FN
STATOR SUPPORT
Readily Available
219150
Condition FN
DR GR HSG
Readily Available
219142
Condition FN
HSG ASSY SER, 3
Readily Available
219128
Condition FN
HSG ASSY SER, 3
Readily Available
2191-0436
Condition NE
BRACKET
Readily Available
2191-2113
Condition NE
ADAPTER STRAIGH
Readily Available
BML65219-1
5330-01-183-8437
Request


 
Top