ISO Group Logo
Defense and Aerospace
Supply Chain Partner
A Dynatech International Company


NSN 5910-01-233-0493, 5910012330493
Cancelled -> Replaced by 5910010778295

Federal Supply Classification
FSC 5910 - Capacitors
National Item Identification Number
NIIN 012330493
Codification Country
United States
Item Name Code
INC 31959
Criticality
(X) This item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
Hazardous Material Indicator Code
(P) There is no information in the HMIRS; however, the NSN is in an FSC in Table II of Federal Standard 313 and an MSDS may be required by the user. The requirement for an MSDS is dependent on a hazard determination of the supplier or the intended end use of the product.
Availability: Readily Available Qualified Suppliers: We have 1 qualified suppliers

Manufacture or supply this part?
Join our growing community of certified suppliers.

Let Us Know
  CALL ABOUT NSN 5910-01-233-0493
Our client representatives are standing by to help fulfill your request.

+1-321-773-5710

  REQUEST QUOTE for 5910-01-233-0493


Have a list that needs to be quoted? Upload it here.

DLMS® Summary

National Stock Number 5910-01-233-0493

National Stock Number (NSN) 5910-01-233-0493, or NIIN 012330493, (capacitor,fixed,metallized,paper) was assigned May 24, 1986 in the Federal Logistics Information System (FLIS). This NIIN is Available for Manual Assignment. This NSN replaces 2 stock numbers: 5910010778295, 5910010121245.

There are 13 manufacturer part numbers associated with this NSN. 5 of those part number(s) are considered obsolete. The manufacturer part numbers were originally supplied by 4 suppliers. Today, 3 suppliers are listed as Active suppliers for this NSN. Of the active suppliers, there are no suppliers that are deemed design controlled or valid supply parts. ISO Group has several sources of supply for this NSN.

This part number has not been procured by the US Government in over 5 years.

This NSN is very common among different weapons systems, belonging to 36 different platforms.

There has been very little demand for this national stock number. The demand for this NSN originated from less than 5 countries. Based on a planned procurement review by the Primary Inventory Control Activity (PICA) on Jun 02, 2006, this NSN's acquisition method was noted as: Suitable for Competitive Acquisition. (Potential sources shall include dealers/distributors.) Acquisition of this part is controlled by QPL procedures. Valid AMCs: 1 and 2.

This NSN is assigned to Item Name Code (INC) 31959. [A CAPACITOR WHOSE CAPACITANCE VALUE CANNOT BE ADJUSTED OR VARIED HAVING PAPER, PLASTIC, OR ANY COMBINATION OF PAPER AND PLASTIC AS THE DIELECTRIC MATERIAL WITH A METALLIC FILM DEPOSITED THEREON. IT MAY BE A SINGLE UNIT OR CONSIST OF TWO OR MORE UNITS WHICH CANNOT BE SEPARATED.]. This item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. There is no information in the HMIRS; however, the NSN is in an FSC in Table II of Federal Standard 313 and an MSDS may be required by the user. The requirement for an MSDS is dependent on a hazard determination of the supplier or the intended end use of the product. NSN 5910012330493 does not contain precious metals.

This NSN is associated to Schedule B 8532290040: fixed capacitors, nesoi. The Schedule B End Use is listed as electric apparatus.

This information was last updated on .


Technical Characteristics

OVERALL LENGTH (NON-CORE)
(ABHP) 1.013 INCHES MAXIMUM
UNABLE TO DECODE
(ABMK) UNABLE TO DECODE
CASE MATERIAL
(CWJK) METAL
OVERALL HEIGHT (NON-CORE)
(ABKW) 0.265 INCHES MAXIMUM
III TERMINAL SURFACE TREATMENT
(CWSG) SOLDER
UNABLE TO DECODE
(ABKW) UNABLE TO DECODE
UNABLE TO DECODE
(ABHP) UNABLE TO DECODE
OVERALL WIDTH (NON-CORE)
(ABMK) 0.265 INCHES MAXIMUM
BODY DIAMETER
(ABPM) 0.265 INCHES MAXIMUM
BODY LENGTH
(ADAQ) 0.813 INCHES NOMINAL
BODY STYLE
(AAQL) W/O MTG FACILITIES, AXIAL TERMINALS
CAPACITANCE VALUE PER SECTION
(CQBQ) 0.220 MICROFARADS SINGLE SECTION
CASE INSULATION MATERIAL
(CWSZ) PLASTIC
DISSIPATION FACTOR AT REFERENCE TEMP IN PERCENT
(CWPM) 0.150
FEATURES PROVIDED
(CBBL) HERMETICALLY SEALED CASE
INSULATION RESISTANCE AT MAXIMUM OPERATING TEMP
(CQBF) 300000.0 MEGOHMS
INSULATION RESISTANCE AT REFERENCE TEMP
(CWPK) 3000000.0 MEGOHMS
NONDERATED OPERATING TEMP
(CQJJ) -65.0 CELSIUS MINIMUM AND 100.0 CELSIUS MAXIMUM
NONDERATED CONTINUOUS VOLTAGE RATING AND TYPE PER SECTION
(CQWM) 50.0 DC SINGLE SECTION
RELIABILITY FAILURE RATE LEVEL IN PERCENT
(AARH) 0.001
RELIABILITY INDICATOR
(AARG) ESTABLISHED
SCHEMATIC DIAGRAM DESIGNATOR
(AEBZ) NO COMMON OR GROUNDED ELECTRODE(S)
SPECIFICATION/STANDARD DATA
(ZZZK) 81349-MIL-C-83421/1 GOVERNMENT SPECIFICATION
TERMINAL DIAMETER
(AEBT) 0.025 INCHES NOMINAL
TERMINAL LENGTH
(ABJT) 1.625 INCHES MINIMUM
TERMINAL SURFACE TREATMENT
(CWSG) SOLDER
TERMINAL TYPE AND QUANTITY
(TTQY) 2 UNINSULATED WIRE LEAD
TEST DATA DOCUMENT
(TEST) 81349-MIL-C-83421 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.).
TOLERANCE RANGE PER SECTION
(CRTP) -5.00 TO 5.00 PERCENT SINGLE SECTION
III INSULATION RESISTANCE AT MAXIMUM OPERATING TEMP
(CQBF) 300000.0 MEGOHMS
NONDERATED OPERATING TEMP
(CQJJ) -65.0 DEG CELSIUS MINIMUM AND 100.0 DEG CELSIUS MAXIMUM

Manufacturer Part Numbers


Related Inventory

2-215079-0
Readily Available
22153083
Readily Available
22-15-2206
Condition FN
KK 100 PCB ASSY
Readily Available
22-15-2186
Condition FN
KK 100 PCB ASSY
Readily Available
2215108-1
Condition NE
GASKET
Readily Available
2-215877-1
Condition FN
8/8 PCB MOD.JAC
Readily Available
22-15-3043
Condition FN
2.54MM R/A FFC
Readily Available
22-150-000
Condition FN
STC.04-2 TCMT S
Readily Available
22-150-001
Condition FN
STC.06-2 TCMT S
Readily Available
22-150-002
Condition FN
STC.08-3 TCMT S
Readily Available
22-150-003
Condition FN
STC.10-3 TCMT S
Readily Available
22-150-004
Condition FN
STC.12-3 TCMT S
Readily Available
22-150-005
Condition FN
EVX2 SCREW - TE
Readily Available
22-150-006
Condition FN
EVX6 SCREW - TE
Readily Available
22-150-007
Condition FN
TCMT2(1.5)1 EVC
Readily Available
22-150-008
Condition FN
TCMT3(2.5)1 EVC
Readily Available
22-150-009
Condition FN
GTN2 BLOCK/BLAD
Readily Available
22-150-010
Condition FN
GTN2 BLOCK/BLAD
Readily Available
22-150-011
Condition FN
GTN3 BLOCK/BLAD
Readily Available
22-150-012
Condition FN
GTN3 BLOCK/BLAD
Readily Available
22-150-013
Condition FN
GTN3 BLOCK/BLAD
Readily Available
22-150-014
Condition FN
GTN-2 EVC5T PAR
Readily Available
22-150-015
Condition FN
GTN-3 EVC5T PAR
Readily Available
22-150-432
Condition FN
DNGN-432 AB30 C
Readily Available
22-151-043
Condition FN
RNGN-43 AW20 CE
Readily Available
22-151-064
Condition FN
RNGN-64 AW20 CE
Readily Available
22-152-032
Condition FN
RNGN-32 AB30 CE
Readily Available
22-152-043
Condition FN
RNGN-43 AB30 CE
Readily Available
22-152-064
Condition FN
RNGN-64 AB30 CE
Readily Available
22-153-322
Condition FN
SNGN-322 AW20 C
Readily Available
22-153-432
Condition FN
SNGN-432 AW20 C
Readily Available
22-153-433
Condition FN
SNGN-433 AW20 C
Readily Available
22-154-322
Condition FN
SNGN-322 AB30 C
Readily Available
22-154-432
Condition FN
SNGN-432 AB30 C
Readily Available
22-156-322
Condition FN
TNGN-322 AB30 C
Readily Available
22-156-432
Condition FN
TNGN-432 AB30 C
Readily Available
22-156-433
Condition FN
TNGN-433 AB30 C
Readily Available
22-157-644
Condition FN
CNGA-644 AW20 C
Readily Available
22-158-432
Condition FN
CNGA-432 AB30 C
Readily Available
22-158-433
Condition FN
CNGA-433 AB30 C
Readily Available
22-159-431
Condition FN
DNGA-431 AW20 C
Readily Available
22-159-432
Condition FN
DNGA-432 AW20 C
Readily Available
22-159-433
Condition FN
DNGA-433 AW20 C
Readily Available
22-159-434
Condition FN
DNGA-434 AW20 C
Readily Available
22-159-543
Condition FN
DNGA-543 AW20 C
Readily Available
22-15-2066
Readily Available
22154

Condition NE
Readily Available
22150

Condition NE
Readily Available
22152

Condition NE
Readily Available
221501

Condition NE
Slow Fire Targe
Readily Available
221-528

Condition NE
Case Constructi
Readily Available
2215G

Condition NE
Case Constructi
Readily Available
22-15-3143
Readily Available
22-15-2036
Readily Available
2215037-1
Readily Available
22-15-2126
Condition FN
KK 100 PCB ASSY
Readily Available
2215569-9
Condition NE
HOSE
Readily Available
2215399-2
Condition NE
CLAMP HOSE
Readily Available
2215105-1
Condition NE
GASKET
Readily Available
2215
Condition NE
Readily Available
2215092-1
Condition NE
FLAPPER
Readily Available
2215404-3
Condition FN
Desc: GASKET; M
Readily Available
2215075-1
Condition NE
WATER SPRAY NOZ
Readily Available
2215099-1
Condition NE
BRACKET
Readily Available
2215674-1
Condition NE
BRACKET
Readily Available
2215597
SPRING
Readily Available
2215588
RETAINER
Readily Available
2215598
FELT
Readily Available
2215948-1
Condition NE
PLENUM
Readily Available
22152-1
Condition NS
PIN
Readily Available
2215073-1
Condition NE
DUCT AY
Readily Available
2215018-3
Condition NS
TREAD
Readily Available
2215584
SEAT
Readily Available
2215585
WEDGE
Readily Available
2215142-1
Condition NE
TUBE ASSY
Readily Available
2215029-1
Condition NS
ARM REST
Readily Available
2215586
SPRING
Readily Available
2215596
ZQ COVER
Readily Available
2215404-2
Condition FN
Desc: GASKET; M
Readily Available
2215404-1
Condition FN
Desc: GASKET; M
Readily Available
2-2-1519
Condition FN
FLANGE YOKE
Readily Available
22150-X
Condition FN
COVER ASSY -, C
Readily Available
221589
Condition FN
WASHER
Readily Available
2215-120-1
Condition NE
FLEX PLATE FOR
Readily Available
2215156-1
Condition NE
SEAL DUCT COUPL
Readily Available
2215569-3
Condition NE
HOSE
Readily Available
221530
Condition FN
Desc: 4-40 X 1/
Request
2215B-()-01
Cabin Pressure
Request
2215B-()-04
Cabin Pressure
Request


 
Top