ISO Group Logo
Defense and Aerospace
Supply Chain Partner
A Dynatech International Company


NSN 5910-01-263-4981, 5910012634981
Cancelled -> Replaced by 5910005461771

Federal Supply Classification
FSC 5910 - Capacitors
National Item Identification Number
NIIN 012634981
Codification Country
United States
Item Name Code
INC 00007
Criticality
(X) This item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
Hazardous Material Indicator Code
(P) There is no information in the HMIRS; however, the NSN is in an FSC in Table II of Federal Standard 313 and an MSDS may be required by the user. The requirement for an MSDS is dependent on a hazard determination of the supplier or the intended end use of the product.
Availability: Request Qualified Suppliers: We have 1 qualified suppliers

Manufacture or supply this part?
Join our growing community of certified suppliers.

Let Us Know
  CALL ABOUT NSN 5910-01-263-4981
Our client representatives are standing by to help fulfill your request.

+1-321-773-5710

  REQUEST QUOTE for 5910-01-263-4981


Have a list that needs to be quoted? Upload it here.

DLMS® Summary

National Stock Number 5910-01-263-4981

National Stock Number (NSN) 5910-01-263-4981, or NIIN 012634981, (capacitor,fixed,ceramic dielectric) was assigned September 15, 1987 in the Federal Logistics Information System (FLIS). NIIN 012634981 was cancelled on April 2, 2020, with a cancelled status of "Item is Cancelled - USE." This NSN was replaced by NSN 5910013603051. This NSN replaces 1 stock number, 5910005461771.

There are 4 manufacturer part numbers associated with this NSN. None of the associated part number(s) are considered obsolete. The manufacturer part numbers were originally supplied by one supplier. Today, one supplier is listed as an Active supplier for this NSN. Of the active suppliers, there are no suppliers that are deemed design controlled or valid supply parts. ISO Group has several sources of supply for this NSN.

This part number has not been procured by the US Government in over 5 years.

Based on a planned procurement review by the Primary Inventory Control Activity (PICA) on Jun 01, 2020, this NSN's acquisition method was noted as: Suitable for Competitive Acquisition. (Potential sources shall include dealers/distributors.) Acquisition of this part is controlled by QPL procedures. Valid AMCs: 1 and 2.

This NSN is assigned to Item Name Code (INC) 00007. [A CAPACITOR, WHOSE CAPACITANCE VALUE CANNOT BE ADJUSTED OR VARIED, HAVING A CERAMIC DIELECTRIC. IT MAY BE A SINGLE UNIT, OR CONSIST OF TWO OR MORE FIXED UNITS WHICH CANNOT BE SEPARATED.]. This item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. There is no information in the HMIRS; however, the NSN is in an FSC in Table II of Federal Standard 313 and an MSDS may be required by the user. The requirement for an MSDS is dependent on a hazard determination of the supplier or the intended end use of the product. NSN 5910012634981 does not contain precious metals.

This information was last updated on .


Technical Characteristics

UNABLE TO DECODE
(CQBQ) UNABLE TO DECODE
NONDERATED OPERATING TEMP
(CQJJ) -55.0 DEG CELSIUS MINIMUM AND 125.0 DEG CELSIUS MAXIMUM
UNABLE TO DECODE
(ABJT) UNABLE TO DECODE
UNABLE TO DECODE
(AEBT) UNABLE TO DECODE
UNABLE TO DECODE
(CQWM) UNABLE TO DECODE
UNABLE TO DECODE
(CWJK) UNABLE TO DECODE
RELIABILITY FAILURE RATE LEVEL IN PERCENT
(AARH) 0.010
UNABLE TO DECODE
(CQLZ) UNABLE TO DECODE
TOLERANCE RANGE PER SECTION
(CRTP) -0.50/+0.50 PICOFARADS SINGLE SECTION
UNABLE TO DECODE
(CWSG) UNABLE TO DECODE
SPECIFICATION/STANDARD DATA
(ZZZK) 81349-MIL-C-20/35 GOVERNMENT SPECIFICATION
TERMINAL LENGTH
(ABJT) 1.250 INCHES NOMINAL
CENTER TO CENTER DISTANCE BETWEEN TERMINALS PARALLEL TO LENGTH
(AEBP) 0.100 INCHES NOMINAL
SCHEMATIC DIAGRAM DESIGNATOR
(AEBZ) NO COMMON OR GROUNDED ELECTRODE(S)
CAPACITANCE VALUE PER SECTION
(CQBQ) 4.300 PICOFARADS SINGLE SECTION
CASE MATERIAL
(CWJK) PLASTIC
TEST DATA DOCUMENT
(TEST) 81349-MIL-C-20 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.).
UNABLE TO DECODE
(TTQY) UNABLE TO DECODE
DISSIPATION FACTOR AT REFERENCE TEMP IN PERCENT
(CWPM) 0.150
UNABLE TO DECODE
(ZZZK) UNABLE TO DECODE
UNABLE TO DECODE
(AARG) UNABLE TO DECODE
UNABLE TO DECODE
(AEBP) UNABLE TO DECODE
TERMINAL DIAMETER
(AEBT) 0.027 INCHES MAXIMUM
TEMP COEFFICIENT OF CAPACITANCE PER SECTION IN PPM PER DEG CELSIUS
(CQLZ) 0.0 SINGLE SECTION
UNABLE TO DECODE
(CRTP) UNABLE TO DECODE
RELIABILITY INDICATOR
(AARG) ESTABLISHED
BODY WIDTH
(ADAT) 0.180 INCHES MINIMUM AND 0.200 INCHES MAXIMUM
UNABLE TO DECODE
(CQJJ) UNABLE TO DECODE AND UNABLE TO DECODE
UNABLE TO DECODE
(CRHD) UNABLE TO DECODE
BODY LENGTH
(ADAQ) 0.180 INCHES MINIMUM AND 0.200 INCHES MAXIMUM
UNABLE TO DECODE
(AEBZ) UNABLE TO DECODE
UNABLE TO DECODE
(TEST) UNABLE TO DECODE
UNABLE TO DECODE
(ADAQ) UNABLE TO DECODE AND UNABLE TO DECODE
BODY HEIGHT
(ADAU) 0.080 INCHES MINIMUM AND 0.100 INCHES MAXIMUM
III TEMP COEFFICIENT OF CAPACITANCE PER SECTION IN PPM PER DEG CELSIUS
(CQLZ) 0.0 SINGLE SECTION
NONDERATED CONTINUOUS VOLTAGE RATING AND TYPE PER SECTION
(CQWM) 200.0 DC SINGLE SECTION
TOLERANCE OF TEMP COEFFICIENT PER SECTION IN PPM PER DEG CELSIUS
(CRHD) -60.0/+60.0 SINGLE SECTION
TERMINAL SURFACE TREATMENT
(CWSG) SOLDER
TERMINAL TYPE AND QUANTITY
(TTQY) 2 UNINSULATED WIRE LEAD
UNABLE TO DECODE
(AAQL) UNABLE TO DECODE
UNABLE TO DECODE
(AARH) UNABLE TO DECODE
UNABLE TO DECODE
(CWPM) UNABLE TO DECODE
BODY STYLE
(AAQL) W/O MTG FACILITIES TERMINAL(S) ON ONE SURFACE
UNABLE TO DECODE
(ADAT) UNABLE TO DECODE AND UNABLE TO DECODE
UNABLE TO DECODE
(ADAU) UNABLE TO DECODE AND UNABLE TO DECODE


Related Inventory



 
Top