ISO Group Logo
Defense and Aerospace
Supply Chain Partner
A Dynatech International Company


NSN 5910-01-325-0280, 5910013250280
CAPACITOR,FIXED,METALLIZED,PAPER

Federal Supply Classification
FSC 5910 - Capacitors
National Item Identification Number
NIIN 013250280
Codification Country
United States
Item Name Code
INC 31959
Criticality
(X) This item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
Hazardous Material Indicator Code
(P) There is no information in the HMIRS; however, the NSN is in an FSC in Table II of Federal Standard 313 and an MSDS may be required by the user. The requirement for an MSDS is dependent on a hazard determination of the supplier or the intended end use of the product.
Availability: Request Qualified Suppliers: Currently qualifying suppliers

Manufacture or supply this part?
Join our growing community of certified suppliers.

Let Us Know
  CALL ABOUT NSN 5910-01-325-0280
Our client representatives are standing by to help fulfill your request.

+1-321-773-5710

  REQUEST QUOTE for 5910-01-325-0280


Have a list that needs to be quoted? Upload it here.

DLMS® Summary

National Stock Number 5910-01-325-0280

National Stock Number (NSN) 5910-01-325-0280, or NIIN 013250280, (capacitor,fixed,metallized,paper) was assigned August 27, 1990 in the Federal Logistics Information System (FLIS). This NSN does not replace any other NSNs.

There are no manufacturer part numbers associated to this NSN.

This part number has not been procured by the US Government in over 5 years.

Based on a planned procurement review by the Primary Inventory Control Activity (PICA) on Jun 02, 2006, this NSN's acquisition method was noted as: Suitable for Competitive Acquisition. (Potential sources shall include dealers/distributors.) Acquisition of this part is controlled by QPL procedures. Valid AMCs: 1 and 2.

This NSN is assigned to Item Name Code (INC) 31959. [A CAPACITOR WHOSE CAPACITANCE VALUE CANNOT BE ADJUSTED OR VARIED HAVING PAPER, PLASTIC, OR ANY COMBINATION OF PAPER AND PLASTIC AS THE DIELECTRIC MATERIAL WITH A METALLIC FILM DEPOSITED THEREON. IT MAY BE A SINGLE UNIT OR CONSIST OF TWO OR MORE UNITS WHICH CANNOT BE SEPARATED.]. This item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. There is no information in the HMIRS; however, the NSN is in an FSC in Table II of Federal Standard 313 and an MSDS may be required by the user. The requirement for an MSDS is dependent on a hazard determination of the supplier or the intended end use of the product. NSN 5910013250280 does not contain precious metals.

This information was last updated on .


Technical Characteristics

BODY WIDTH
(ADAT) 0.370 INCHES MINIMUM AND 0.410 INCHES MAXIMUM
BODY HEIGHT
(ADAU) 0.180 INCHES MINIMUM AND 0.220 INCHES MAXIMUM
CENTER TO CENTER DISTANCE BETWEEN TERMINALS PARALLEL TO LENGTH
(AEBP) 0.285 INCHES MINIMUM AND 0.315 INCHES MAXIMUM
BODY STYLE
(AAQL) W/O MTG FACILITIES TERMINAL(S) ON ONE SURFACE
RELIABILITY FAILURE RATE LEVEL IN PERCENT
(AARH) 1.000
END ITEM IDENTIFICATION
(AGAV) 1260-01-208-6448 MAST MOUNTED SI
TERMINAL SURFACE TREATMENT
(CWSG) SOLDER
CAPACITANCE VALUE PER SECTION
(CQBQ) 0.1800 MICROFARADS SINGLE SECTION
TOLERANCE RANGE PER SECTION
(CRTP) -1.00/+1.00 PERCENT SINGLE SECTION
CASE MATERIAL
(CWJK) CERAMIC
SPECIFICATION/STANDARD DATA
(ZZZK) 81349-MIL-C-39022/11 GOVERNMENT SPECIFICATION
RELIABILITY INDICATOR
(AARG) ESTABLISHED
TEST DATA DOCUMENT
(TEST) 81349-MIL-C-39022 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.).
INSULATION RESISTANCE AT REFERENCE TEMP
(CWPK) 200000.0 MEGOHMS
SCHEMATIC DIAGRAM DESIGNATOR
(AEBZ) NO COMMON OR GROUNDED ELECTRODE(S)
NONDERATED CONTINUOUS VOLTAGE RATING AND TYPE PER SECTION
(CQWM) 50.0 DC SINGLE SECTION
TERMINAL LENGTH
(ABJT) 1.250 INCHES MINIMUM
BODY LENGTH
(ADAQ) 0.320 INCHES MINIMUM AND 0.370 INCHES MAXIMUM
TERMINAL DIAMETER
(AEBT) 0.024 INCHES MINIMUM AND 0.029 INCHES MAXIMUM
TERMINAL TYPE AND QUANTITY
(TTQY) 2 UNINSULATED WIRE LEAD
FEATURES PROVIDED
(CBBL) HERMETICALLY SEALED CASE
INSULATION RESISTANCE AT MAXIMUM OPERATING TEMP
(CQBF) 70000.0 MEGOHMS
DISSIPATION FACTOR AT REFERENCE TEMP IN PERCENT
(CWPM) 0.200
DIELECTRIC MATERIAL
(CWSS) PLASTIC POLYCARBONATE
NONDERATED OPERATING TEMP
(CQJJ) -55.0 DEG CELSIUS MINIMUM AND 85.0 DEG CELSIUS MAXIMUM

Manufacturer Part Numbers


Related Inventory



 
Top