ISO Group Logo
Defense and Aerospace
Supply Chain Partner
A Dynatech International Company


NSN 5910-01-458-1324, 5910014581324
CAPACITOR,FIXED,ELECTROLYTIC

Federal Supply Classification
FSC 5910 - Capacitors
National Item Identification Number
NIIN 014581324
Codification Country
United States
Item Name Code
INC 00008
Criticality
(X) This item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
Hazardous Material Indicator Code
(P) There is no information in the HMIRS; however, the NSN is in an FSC in Table II of Federal Standard 313 and an MSDS may be required by the user. The requirement for an MSDS is dependent on a hazard determination of the supplier or the intended end use of the product.
Availability: Request Qualified Suppliers: Currently qualifying suppliers

Manufacture or supply this part?
Join our growing community of certified suppliers.

Let Us Know
  CALL ABOUT NSN 5910-01-458-1324
Our client representatives are standing by to help fulfill your request.

+1-321-773-5710

  REQUEST QUOTE for 5910-01-458-1324


Have a list that needs to be quoted? Upload it here.

DLMS® Summary

National Stock Number 5910-01-458-1324

National Stock Number (NSN) 5910-01-458-1324, or NIIN 014581324, (capacitor,fixed,electrolytic) was assigned August 14, 1998 in the Federal Logistics Information System (FLIS). This NSN does not replace any other NSNs.

There are no manufacturer part numbers associated to this NSN.

This part number has not been procured by the US Government in over 5 years.

This NSN is somewhat common among different platforms, belonging to 2 different weapons systems.

Based on a planned procurement review by the Primary Inventory Control Activity (PICA) on Jun 02, 2006, this NSN's acquisition method was noted as: Suitable for Competitive Acquisition. (Potential sources shall include dealers/distributors.) Acquisition of this part is controlled by QPL procedures. Valid AMCs: 1 and 2.

This NSN is assigned to Item Name Code (INC) 00008. [A CAPACITOR, WHOSE CAPACITANCE VALUE CANNOT BE ADJUSTED OR VARIED, HAVING A CHEMICALLY FORMED FILM AS THE DIELECTRIC. IT MAY BE A SINGLE UNIT, OR CONSIST OF TWO OR MORE FIXED UNITS WHICH CANNOT BE SEPARATED.]. This item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. There is no information in the HMIRS; however, the NSN is in an FSC in Table II of Federal Standard 313 and an MSDS may be required by the user. The requirement for an MSDS is dependent on a hazard determination of the supplier or the intended end use of the product. NSN 5910014581324 does not contain precious metals.

This information was last updated on .


Technical Characteristics

CAPACITANCE VALUE PER SECTION
(CQBQ) 10.000 MICROFARADS SINGLE SECTION
NONDERATED CONTINUOUS VOLTAGE RATING AND TYPE PER SECTION
(CQWM) 50.0 DC SINGLE SECTION
NONDERATED OPERATING TEMP
(CQJJ) 85.0 CELSIUS MAXIMUM
CASE INSULATION MATERIAL
(CWSZ) PLASTIC
CAPACITIVE ELECTRODE MATERIAL
(CWNJ) ALUMINUM
TERMINAL TYPE AND QUANTITY
(TTQY) 2 UNINSULATED WIRE LEAD
BODY STYLE
(AAQL) W/THD MTG STUDS, AXIAL TERMINALS
RELIABILITY FAILURE RATE LEVEL IN PERCENT
(AARH) 0.100
SCHEMATIC DIAGRAM DESIGNATOR
(AEBZ) ELECTRODE(S) GROUNDED TO CASE, W/GND TERMINAL
BODY DIAMETER
(ABPM) 0.274 INCHES MINIMUM AND 0.305 INCHES MAXIMUM
ELECTRICAL POLARIZATION
(AECQ) POLARIZED
NONDERATED OPERATING TEMP
(CQJJ) 85.0 DEG CELSIUS MAXIMUM
TOLERANCE RANGE PER SECTION
(CRTP) -0.100 TO 0.100 MILLIFARADS SINGLE SECTION
TOLERANCE RANGE PER SECTION
(CRTP) -0.100/+0.100 MILLIFARADS SINGLE SECTION
TERMINAL LENGTH
(ABJT) 1.250 INCHES MINIMUM AND 1.750 INCHES MAXIMUM
TEST DATA DOCUMENT
(TEST) 81349-MIL-PRF-39003 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.).
SPECIFICATION/STANDARD DATA
(ZZZK) 81349-MIL-PRF-39003/1 GOVERNMENT SPECIFICATION
BODY LENGTH
(ADAQ) 0.655 INCHES MINIMUM AND 0.717 INCHES MAXIMUM
CASE MATERIAL
(CWJK) METAL
RELIABILITY INDICATOR
(AARG) ESTABLISHED

Manufacturer Part Numbers


Related Inventory



 
Top