ISO Group Logo
Defense and Aerospace
Supply Chain Partner
A Dynatech International Company


NSN 5915-00-436-6248, 5915004366248
FILTER,LOW PASS

Federal Supply Classification
FSC 5915 - Filters and Networks
National Item Identification Number
NIIN 004366248
Codification Country
United States
Item Name Code
INC 13911
Criticality
(X) This item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
Hazardous Material Indicator Code
(P) There is no information in the HMIRS; however, the NSN is in an FSC in Table II of Federal Standard 313 and an MSDS may be required by the user. The requirement for an MSDS is dependent on a hazard determination of the supplier or the intended end use of the product.
Availability: Request Qualified Suppliers: Currently qualifying suppliers

Manufacture or supply this part?
Join our growing community of certified suppliers.

Let Us Know
  CALL ABOUT NSN 5915-00-436-6248
Our client representatives are standing by to help fulfill your request.

+1-321-773-5710

  REQUEST QUOTE for 5915-00-436-6248


Have a list that needs to be quoted? Upload it here.

DLMS® Summary

National Stock Number 5915-00-436-6248

National Stock Number (NSN) 5915-00-436-6248, or NIIN 004366248, (filter,low pass) was assigned September 5, 1969 in the Federal Logistics Information System (FLIS). This NSN does not replace any other NSNs.

There are 2 manufacturer part numbers associated with this NSN. None of the associated part number(s) are considered obsolete. The manufacturer part numbers were originally supplied by one supplier. Today, one supplier is listed as an Active supplier for this NSN. Of the active suppliers, there are no suppliers that are deemed design controlled or valid supply parts.

This part number has not been procured by the US Government in over 5 years.

Based on a planned procurement review by the Primary Inventory Control Activity (PICA) on Jun 02, 2006, this NSN's acquisition method was noted as: Acquire directly from the actual manufacturer, whether or not the prime contractor is the actual manufacturer. The Government physically does not have in its possession sufficient, accurate, or legible data to purchase this part from other than current source(s). (NOTE: This code is applicable only to parts under immediate buy requirements and only as long as the deficiency is under review for resolution and appropriate recoding.) Valid AMCs: 1, 2, 3, 4 and 5.

This NSN is assigned to Item Name Code (INC) 13911. [AN ITEM DESIGNED TO PASS ALL FREQUENCIES BELOW A SPECIFIED FREQUENCY. EXCLUDES:A SINGLE INDUCTANCE, A SINGLE CAPACITANCE, OR A SINGLE RESISTANCE. SEE COIL (AS MODIFIED); REACTOR; CAPACITOR (AS MODIFIED); AND RESISTOR (AS MODIFIED).]. This item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. There is no information in the HMIRS; however, the NSN is in an FSC in Table II of Federal Standard 313 and an MSDS may be required by the user. The requirement for an MSDS is dependent on a hazard determination of the supplier or the intended end use of the product. NSN 5915004366248 does not contain precious metals.

This information was last updated on .


Technical Characteristics

UNABLE TO DECODE
(CFHK) UNABLE TO DECODE
DISCRIMINATION AT SPECIFIED FREQUENCIES PER FUNCTION IN DECIBELS
(CRBC) ANY ACCEPTABLE
SOURCE IMPEDANCE RATING PER FUNCTION
(AHAQ) 10.0 KILOHMS BLANK SINGLE FUNCTION
LOAD IMPEDANCE PER FUNCTION
(AHAS) 10.0 KILOHMS BLANK SINGLE FUNCTION
INCLOSURE TYPE
(AKNA) HERMETICALLY SEALED
REFERENCE FREQUENCY PER FUNCTION
(AHAJ) 22.5 KILOHERTZ BLANK SINGLE FUNCTION
UNABLE TO DECODE
(AJYP) UNABLE TO DECODE
SCREW THREAD QUANTITY PER INCH
(CFHK) 32
SPECIAL FEATURES
(FEAT) SCREW THREAD 0.138-32 UNC
BODY WIDTH
(ADAT) 1.190 INCHES NOMINAL
FREQUENCY BAND WIDTH PER FUNCTION
(CRBB) 0.00 HERTZ BLANK AND 45.00 KILOHERTZ BLANK SINGLE FUNCTION
OPERATING TEMP RANGE
(AFGA) -28.0 TO 65.0 DEG CELSIUS
MOUNTING FACILITY TYPE AND QUANTITY
(AXHR) 1 THREADED STUD
INSERTION LOSS AT REFERENCE FREQUENCY PER FUNCTION IN DECIBELS
(CQDR) 3.0 BLANK
STYLE DESIGNATOR
(STYL) RECTANGULAR TERMINAL/TERMINALS ON ONE SURFACE
OPERATING TEMP RANGE
(AFGA) -28.0 TO 65.0 CELSIUS
MOUNTING FACILITY SCREW THREAD SERIES DESIGNATOR
(AKEJ) UNC
FREQUENCY BAND WIDTH PER FUNCTION
(CRBB) 0.00 HERTZ BLANK AND 45.00 KILOHERTZ BLANK
DISCRIMINATION AT SPECIFIED FREQUENCIES PER FUNCTION IN DECIBELS
(CRBC) 3.0 NOMINAL BLANK AND 3.0 NOMINAL BLANK AND 60.0 NOMINAL BLANK
BODY HEIGHT
(ADAU) 1.250 INCHES NOMINAL
INSERTION LOSS AT REFERENCE FREQUENCY PER FUNCTION IN DECIBELS
(CQDR) 3.0 BLANK SINGLE FUNCTION
DISCRIMINATION AT SPECIFIED FREQUENCIES PER FUNCTION IN DECIBELS
(CRBC) 3.0 NOMINAL BLANK AND 60.0 NOMINAL BLANK 1ST FUNCTION
OVERALL HEIGHT
(ABKW) 1.630 INCHES NOMINAL
DISTANCE BETWEEN CENTERLINES OF MOUNTING FACILITIES PARALLEL TO BODY WIDTH
(AEHA) 0.750 INCHES NOMINAL
LOAD IMPEDANCE PER FUNCTION
(AHAS) 10.0 KILOHMS BLANK
NOMINAL THREAD SIZE
(CQJX) 0.138 INCHES
PRINCIPAL CIRCUITRY TYPE PER FUNCTION
(AHBL) INDUCTANCE-CAPACITANCE BLANK SINGLE FUNCTION
OPERATING TEMP RANGE
(AFGA) -28.0/+65.0 DEG CELSIUS
SOURCE IMPEDANCE RATING PER FUNCTION
(AHAQ) 10.0 KILOHMS BLANK
FUNCTIONAL TERMINAL TYPE AND QUANTITY
(CQDW) 1 WIRE HOOK INPUT 1ST FUNCTION
BODY LENGTH
(ADAQ) 1.190 INCHES NOMINAL
DISTANCE BETWEEN CENTERLINES OF MOUNTING FACILITIES PARALLEL TO BODY LENGTH
(AEBY) 0.750 INCHES NOMINAL
FUNCTIONAL TERMINAL TYPE AND QUANTITY
(CQDW) 1 WIRE HOOK GROUND 3RD FUNCTION
FUNCTIONAL TERMINAL TYPE AND QUANTITY
(CQDW) 1 WIRE HOOK OUTPUT 2ND FUNCTION
SCREW THREAD DIAMETER
(AJYN) 0.138 INCHES NOMINAL
UNABLE TO DECODE
(AJYN) UNABLE TO DECODE
SCREW THREAD SERIES DESIGNATOR
(AJYP) UNC
MOUNTING FACILITY TYPE AND QUANTITY
(AXHR) 1 THREADED STUD 1ST FUNCTION

Manufacturer Part Numbers


Related Inventory



 
Top