ISO Group Logo
Defense and Aerospace
Supply Chain Partner
A Dynatech International Company


NSN 5925-00-056-4635, 5925000564635
CIRCUIT BREAKER

Federal Supply Classification
FSC 5925 - Circuit Breakers
National Item Identification Number
NIIN 000564635
Codification Country
United States
Item Name Code
INC 00136
Criticality
(X) This item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
Hazardous Material Indicator Code
(P) There is no information in the HMIRS; however, the NSN is in an FSC in Table II of Federal Standard 313 and an MSDS may be required by the user. The requirement for an MSDS is dependent on a hazard determination of the supplier or the intended end use of the product.
Availability: Readily Available Qualified Suppliers: Currently qualifying suppliers

Manufacture or supply this part?
Join our growing community of certified suppliers.

Let Us Know
  CALL ABOUT NSN 5925-00-056-4635
Our client representatives are standing by to help fulfill your request.

+1-321-773-5710

  REQUEST QUOTE for 5925-00-056-4635


Have a list that needs to be quoted? Upload it here.

DLMS® Summary

National Stock Number 5925-00-056-4635

National Stock Number (NSN) 5925-00-056-4635, or NIIN 000564635, (circuit breaker) was assigned January 1, 1961 in the Federal Logistics Information System (FLIS). This NIIN is Available for Manual Assignment. This NSN does not replace any other NSNs.

There are 2 manufacturer part numbers associated with this NSN. None of the associated part number(s) are considered obsolete. The manufacturer part numbers were originally supplied by one supplier. Today, there are no suppliers listed as an Active supplier for this NSN. Of the active suppliers, there are no suppliers that are deemed design controlled or valid supply parts.

This part number has not been procured by the US Government in over 5 years.

There has been very little demand for this national stock number. The demand for this NSN originated from less than 5 countries. Based on a planned procurement review by the Primary Inventory Control Activity (PICA) on Jul 02, 2005, this NSN's acquisition method was noted as: Acquire directly from the actual manufacturer, whether or not the prime contractor is the actual manufacturer. This part requires engineering source approval by the design control activity in order to maintain the quality of the part. An alternate source must qualify in accordance with the design control activity's procedures, as approved by the cognizant Government engineering activity. Valid AMCs: 1, 2, 3, 4 and 5.

This NSN is assigned to Item Name Code (INC) 00136. [A DEVICE WITH MEANS OTHER THAN FUSES FOR AUTOMATICALLY OPENING THE CIRCUIT IN WHICH IT IS INSTALLED WHEN THE CURRENT VARIES FROM THE PREDETERMINED VALUE FOR WHICH THE DEVICE IS SET. MAY INCLUDE PROVISIONS FOR MANUAL OPERATION. AT LEAST ONE SET OF CONTACTS MUST BE IN SERIES WITH THE ACTUATING ELEMENT(S). A COMBINATION OF SEMICONDUCTOR AND PASSIVE DEVICES MAY BE USED IN LIEU OF CONTACTS. FOR AUTOMATICALLY OPERATED ITEMS IN WHICH THE ACTUATING (TRIPPING) ELEMENT AND CONTACTS ARE NOT IN SERIES, SEE RELAY (AS MODIFIED). FOR ITEMS WHICH ARE OPERATED BOTH MANUALLY AND AUTOMATICALLY BUT THE ACTUATING ELEMENTS AND CONTACT ARE NOT IN SERIES, SEE RELAY-SWITCH. EXCLUDES:CIRCUIT BREAKER BOX AND MAGNETO "BREAKER" ASSEMBLIES. SEE ALSO SWITCH (AS MODIFIED); AND CONTROLLER.]. This item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. There is no information in the HMIRS; however, the NSN is in an FSC in Table II of Federal Standard 313 and an MSDS may be required by the user. The requirement for an MSDS is dependent on a hazard determination of the supplier or the intended end use of the product. NSN 5925000564635 does not contain precious metals.

This NSN is associated to Schedule B 8536200040: automatic circuit breakers, for a voltage not exceeding 1,000 v, nesoi. The Schedule B End Use is listed as electric apparatus. NAICS classification category 335313: switchgear and switchboard apparatus manufacturing.

This information was last updated on .


Technical Characteristics

III FRAGILITY FACTOR
(AFJN) MODERATELY RUGGED
III STORAGE TYPE
(BBRG) GENERAL PURPOSE WAREHOUSE
III SPECIAL HANDLING FEATURE
(BBRJ) MAGNETIC
CIRCUIT PROTECTION TYPE
(CPRH) UNABLE TO DECODE
FREQUENCY IN HERTZ
(FREQ) 50.0 ALL LOCATIONS OR 60.0 ALL LOCATIONS
III ARC QUENCHING METHOD
(APNQ) MAGNETIC BLOWOUT
MOUNTING FACILITY TYPE AND QUANTITY
(AXHR) 12 THREADED HOLE AND 12 UNTHREADED HOLE
MAXIMUM INTERRUPTING CAPACITY CURRENT TYPE AND RATING PER POLE IN AMPS
(CPRG) UNABLE TO DECODE
TRIP RELEASE METHOD
(CPRJ) UNABLE TO DECODE
TRIP RELEASE CHARACTERISTIC
(CPRL) UNABLE TO DECODE
THREAD SERIES DESIGNATOR
(THSD) UNC
OPERATING VOLTAGE TYPE AND RATING PER POLE IN VOLTS
(CPRF) UNABLE TO DECODE
CASE MATERIAL
(ADTV) PLASTIC
ULTIMATE TRIP RATING OF CONTINUOUS CURRENT RATING PER POLE IN PERCENT
(CPRN) UNABLE TO DECODE
INTERNAL TRIP RELEASE CONFIGURATION
(CPSM) UNABLE TO DECODE
CASE MATERIAL
(CWJK) PLASTIC
MAXIMUM CONTINUOUS LOAD CURRENT RATING PER POLE
(CPLM) UNABLE TO DECODE
UNPACKAGED UNIT WEIGHT
(PKWT) 1.770 POUNDS
ACTUATOR FUNCTION
(CPRW) TRIP-RESET
ACTUATOR POSITION DESIGNATION
(CPRX) AT EACH POLE
ARC QUENCHING METHOD
(APNQ) MAGNETIC BLOWOUT
BODY LENGTH
(ADAQ) 5.250 INCHES NOMINAL
BODY STYLE
(AAQL) MULTIPOLE-MULTIPLE ACTUATOR TYPE
BODY WIDTH
(ADAT) 4.500 INCHES NOMINAL
BOSS HEIGHT
(AJEC) 0.218 INCHES NOMINAL
CENTER TO CENTER DISTANCE BETWEEN TERMINALS PARALLEL TO LENGTH
(AEBP) 4.359 INCHES NOMINAL
CENTER TO CENTER DISTANCE BETWEEN TERMINALS PARALLEL TO WIDTH
(AEBQ) 0.984 INCHES NOMINAL
CIRCUIT PROTECTION TYPE
(CPRH) OVERCURRENT ALL LOCATIONS
DISTANCE BETWEEN CENTERLINES OF MOUNTING FACILITIES PARALLEL TO BODY WIDTH
(AEHA) 0.984 INCHES NOMINAL
DISTANCE BETWEEN CENTERLINES OF MOUNTING FACILITIES PARALLEL TO BODY LENGTH
(AEBY) 3.062 INCHES NOMINAL
EXTERNAL ACTUATOR LINKAGE ARRANGEMENT
(CPRY) ONE, TWO, AND THREE LINKED
FRAGILITY FACTOR
(AFJN) MODERATELY RUGGED
FREQUENCY IN HERTZ
(FREQ) 50.0 OR 60.0 ALL LOCATIONS
INCLOSURE PROTECTION TYPE FOR WHICH DESIGNED
(CQXF) FUNGUS RESISTANT AND MOISTURE RESISTANT
INTERNAL TRIP RELEASE CONFIGURATION
(CPSM) SERIES TRIP ALL LOCATIONS
MAIN CONTACT TRIPPING MECHANISM TYPE
(CPRR) TRIP FREE
MANUAL ACTUATOR TYPE AND QUANTITY
(CPRT) 3 TOGGLE
MATERIAL
(MATT) PLASTIC CASE
MAXIMUM CONTINUOUS LOAD CURRENT RATING PER POLE
(CPLM) 50.0 AMPERES AC ALL LOCATIONS
MAXIMUM INTERRUPTING CAPACITY CURRENT TYPE AND RATING PER POLE IN AMPS
(CPRG) 1500.0 AC ALL LOCATIONS
MOUNTING FACILITY TYPE AND QUANTITY
(AXHR) 12 THREADED HOLE(S) AND 12 UNTHREADED HOLE(S)
MOUNTING SURFACE TO TERMINAL END DISTANCE
(AJWX) 3.499 INCHES NOMINAL
NOMINAL THREAD SIZE
(CQJX) 0.164 INCHES
OPERATING VOLTAGE TYPE AND RATING PER POLE IN VOLTS
(CPRF) 250.0 AC ALL LOCATIONS
POLE QUANTITY
(AKPX) 3
RESET METHOD
(CPRQ) MANUAL
SPECIAL HANDLING FEATURE
(BBRJ) MAGNETIC
STORAGE TYPE
(BBRG) GENERAL PURPOSE WAREHOUSE
TERMINAL TYPE AND QUANTITY
(TTQY) 6 THREADED STUD
THREAD SERIES DESIGNATOR
(THSD) UNIFIED NATIONAL COARSE (UNC)
THREAD QUANTITY PER INCH
(CMLP) 32
TRIP RELEASE CHARACTERISTIC
(CPRL) INSTANTANEOUS ALL LOCATIONS
TRIP RELEASE METHOD
(CPRJ) MAGNETIC-HYDRAULIC ALL LOCATIONS
ULTIMATE TRIP RATING OF CONTINUOUS CURRENT RATING PER POLE IN PERCENT
(CPRN) 125.0 ALL LOCATIONS
UNPACKAGED UNIT WEIGHT
(CTJS) 1.770 POUNDS NOMINAL
UNTHREADED MOUNTING HOLE DIAMETER
(AEBV) 0.190 INCHES NOMINAL
UNABLE TO DECODE
(ADTV) UNABLE TO DECODE
III UNPACKAGED UNIT WEIGHT
(PKWT) 1.770 POUNDS
UNABLE TO DECODE
(PKWT) UNABLE TO DECODE

Manufacturer Part Numbers


Related Inventory

827-22-004-10-003101
Condition NE
Readily Available
G5326632
U04100.031.0150
Condition NE
Grade 8, 5/16"-
Readily Available
G1115642
N04100.031.0175
Condition NE
Grade 8, 5/16"-
Readily Available
G2524907
U28100.031.0100
Condition NE
Sheet Metal Scr
Readily Available
G0339748
N04100.031.0125
Condition NE
Grade 8, 5/16"-
Readily Available
G3229457
U04100.031.0175
Condition NE
Grade 8, 5/16"-
Readily Available
6KXA9
N04100.031.0175
Condition NE
Hex Head Cap Sc
Readily Available
38ZW15
N04100.031.0100
Condition NE
Hex Head Cap Sc
Readily Available
38ZW16
N04100.031.0125
Condition NE
Hex Head Cap Sc
Readily Available
38TN69
N04100.031.0150
Condition NE
Hex Head Cap Sc
Readily Available
2EA81
U04100.031.0175
Condition NE
Hex Head Cap Sc
Readily Available
22TF83
U04100.031.0100
Condition NE
Hex Head Cap Sc
Readily Available
22TF84
U04100.031.0125
Condition NE
Hex Head Cap Sc
Readily Available
22TF85
U04100.031.0137
Condition NE
Hex Head Cap Sc
Readily Available
22TF86
U04100.031.0150
Condition NE
Hex Head Cap Sc
Readily Available
22TF87
U04100.031.0162
Condition NE
Hex Head Cap Sc
Readily Available
1ME11
U28100.031.0100
Condition NE
Sheet Metal Scr
Readily Available
1ME12
U28100.031.0150
Condition NE
Tapping Sheet M
Readily Available
2FE88
MSFFI-1000310-10
Condition NE
Machine Screw:
Readily Available
41LR11
U39100.031.0100
Condition NE
Spring Pin,0.31
Readily Available
41LR12
U39100.031.0112
Condition NE
Spring Pin,0.31
Readily Available
41LR13
U39100.031.0125
Condition NE
Spring Pin,0.31
Readily Available
41LR14
U39100.031.0150
Condition NE
Spring Pin,0.31
Readily Available
41LR15
U39100.031.0162
Condition NE
Spring Pin,0.31
Readily Available
41LR16
U39100.031.0175
Condition NE
Spring Pin,0.31
Readily Available
41LR17
U39100.031.0187
Condition NE
Spring Pin,0.31
Readily Available
31KL57
U09100.031.0150
Condition NE
Sleeve Anchor:
Readily Available
821-22-002-10-003101
Condition NE
Readily Available
827-22-014-10-003101
Condition NE
Readily Available


 
Top