ISO Group Logo
Defense and Aerospace
Supply Chain Partner
A Dynatech International Company


NSN 5925-01-181-7358, 5925011817358
CIRCUIT BREAKER

Federal Supply Classification
FSC 5925 - Circuit Breakers
National Item Identification Number
NIIN 011817358
Codification Country
United States
Item Name Code
INC 00136
Criticality
(X) This item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
Hazardous Material Indicator Code
(P) There is no information in the HMIRS; however, the NSN is in an FSC in Table II of Federal Standard 313 and an MSDS may be required by the user. The requirement for an MSDS is dependent on a hazard determination of the supplier or the intended end use of the product.
Availability: Request Qualified Suppliers: Currently qualifying suppliers

Manufacture or supply this part?
Join our growing community of certified suppliers.

Let Us Know
  CALL ABOUT NSN 5925-01-181-7358
Our client representatives are standing by to help fulfill your request.

+1-321-773-5710

  REQUEST QUOTE for 5925-01-181-7358


Have a list that needs to be quoted? Upload it here.

DLMS® Summary

National Stock Number 5925-01-181-7358

National Stock Number (NSN) 5925-01-181-7358, or NIIN 011817358, (circuit breaker) was assigned June 14, 1984 in the Federal Logistics Information System (FLIS). This NSN does not replace any other NSNs.

There is only one manufacturer part number associated with this NSN. One of those part number(s) are considered obsolete. The manufacturer part numbers were originally supplied by 2 suppliers. Today, one supplier is listed as an Active supplier for this NSN. Of the active suppliers, only one supplier is deemed design controlled or valid supply parts.

This part number has not been procured by the US Government in over 5 years.

Based on a planned procurement review by the Primary Inventory Control Activity (PICA) on Apr 02, 2006, this NSN's acquisition method was noted as: Acquire only from the prime contractor although the engineering data identifies the Commercial and Government Entity Code (CAGE) and part number of a source other than the prime contractor. The Government physically does not have in its possession sufficient, accurate, or legible data to purchase this part from other than current source(s). (NOTE: This code is applicable only to parts under immediate buy requirements and only as long as the deficiency is under review for resolution and appropriate recoding.) Valid AMCs: 1, 2, 3, 4 and 5.

This NSN is assigned to Item Name Code (INC) 00136. [A DEVICE WITH MEANS OTHER THAN FUSES FOR AUTOMATICALLY OPENING THE CIRCUIT IN WHICH IT IS INSTALLED WHEN THE CURRENT VARIES FROM THE PREDETERMINED VALUE FOR WHICH THE DEVICE IS SET. MAY INCLUDE PROVISIONS FOR MANUAL OPERATION. AT LEAST ONE SET OF CONTACTS MUST BE IN SERIES WITH THE ACTUATING ELEMENT(S). A COMBINATION OF SEMICONDUCTOR AND PASSIVE DEVICES MAY BE USED IN LIEU OF CONTACTS. FOR AUTOMATICALLY OPERATED ITEMS IN WHICH THE ACTUATING (TRIPPING) ELEMENT AND CONTACTS ARE NOT IN SERIES, SEE RELAY (AS MODIFIED). FOR ITEMS WHICH ARE OPERATED BOTH MANUALLY AND AUTOMATICALLY BUT THE ACTUATING ELEMENTS AND CONTACT ARE NOT IN SERIES, SEE RELAY-SWITCH. EXCLUDES:CIRCUIT BREAKER BOX AND MAGNETO "BREAKER" ASSEMBLIES. SEE ALSO SWITCH (AS MODIFIED); AND CONTROLLER.]. This item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. There is no information in the HMIRS; however, the NSN is in an FSC in Table II of Federal Standard 313 and an MSDS may be required by the user. The requirement for an MSDS is dependent on a hazard determination of the supplier or the intended end use of the product. NSN 5925011817358 does not contain precious metals.

This information was last updated on .


Technical Characteristics

BODY STYLE
(AAQL) MULTIPOLE-SINGLE ACTUATOR TYPE
BODY HEIGHT
(ADAU) 3.660 INCHES NOMINAL
CENTER TO CENTER DISTANCE BETWEEN TERMINALS PARALLEL TO WIDTH
(AEBQ) 1.500 INCHES NOMINAL
CASE MATERIAL
(ADTV) PLASTIC
UNABLE TO DECODE
(ADTV) UNABLE TO DECODE
III CUBIC MEASURE
(CBME) 226.181 CUBIC INCHES
ULTIMATE TRIP RATING OF CONTINUOUS CURRENT RATING PER POLE IN PERCENT
(CPRN) 135.0 ALL LOCATIONS
TRIP RELEASE AMBIENT TEMP RATING
(CRCF) 40.0 DEG CELSIUS NOMINAL ALL LOCATIONS
OPERATING VOLTAGE TYPE AND RATING PER POLE IN VOLTS
(CPRF) 600.0 AC AND 250.0 DC ALL LOCATIONS
TRIP RELEASE CHARACTERISTIC
(CPRL) TIME DELAY ALL LOCATIONS
RESET METHOD
(CPRQ) MANUAL
DISTANCE BETWEEN CENTERLINES OF MOUNTING FACILITIES PARALLEL TO BODY LENGTH
(AEBY) 7.130 INCHES NOMINAL
FRAGILITY FACTOR
(AFJN) MODERATELY RUGGED
DISTANCE BETWEEN CENTERLINES OF MOUNTING FACILITIES PARALLEL TO BODY WIDTH
(AEHA) 0.750 INCHES NOMINAL
BOSS HEIGHT
(AJEC) 1.090 INCHES NOMINAL
MAXIMUM INTERRUPTING CAPACITY CURRENT TYPE AND RATING PER POLE IN AMPS
(CPRG) 25000.0 AC ALL LOCATIONS AND 10000.0 DC ALL LOCATIONS
POLE QUANTITY
(AKPX) 3
MOUNTING FACILITY TYPE AND QUANTITY
(AXHR) 4 UNTHREADED HOLE
STORAGE TYPE
(BBRG) ANY ACCEPTABLE
OPERATING VOLTAGE TYPE AND RATING PER POLE IN VOLTS
(CPRF) 600.0 AC ALL LOCATIONS AND 250.0 DC ALL LOCATIONS
CENTER TO CENTER DISTANCE BETWEEN TERMINALS PARALLEL TO LENGTH
(AEBP) 7.130 INCHES NOMINAL
BODY WIDTH
(ADAT) 4.470 INCHES NOMINAL
UNTHREADED MOUNTING HOLE DIAMETER
(AEBV) 0.437 INCHES NOMINAL
FREQUENCY IN HERTZ
(FREQ) 60.0 ALL LOCATIONS
CUBIC MEASURE
(CBME) 226.181 CUBIC INCHES
TRIP RELEASE METHOD
(CPRJ) THERMAL-MAGNETIC ALL LOCATIONS
ACTUATOR FUNCTION
(CPRW) TRIP-RESET
ACTUATOR POSITION DESIGNATION
(CPRX) AT POLE TWO
MANUAL ACTUATOR TYPE AND QUANTITY
(CPRT) 1 TOGGLE
TERMINAL TYPE AND QUANTITY
(TTQY) 6 THREADED STUD
MAXIMUM CONTINUOUS LOAD CURRENT RATING PER POLE
(CPLM) 110.0 AMPERES DC ALL LOCATIONS
MAXIMUM INTERRUPTING CAPACITY CURRENT TYPE AND RATING PER POLE IN AMPS
(CPRG) 25000.0 AC AND 10000.0 DC ALL LOCATIONS
CIRCUIT PROTECTION TYPE
(CPRH) OVERCURRENT ALL LOCATIONS
BODY LENGTH
(ADAQ) 8.000 INCHES NOMINAL
MAIN CONTACT TRIPPING MECHANISM TYPE
(CPRR) TRIP FREE
TRIP DELAY TIME IN SECONDS PER RATED CONTINUOUS CURRENT
(CQWN) 160.000 MINIMUM AT 200 PCT AND 360.000 MAXIMUM AT 200 PCT ALL LOCATIONS
CASE MATERIAL
(CWJK) PLASTIC

Manufacturer Part Numbers


Related Inventory



 
Top