ISO Group Logo
Defense and Aerospace
Supply Chain Partner
A Dynatech International Company


NSN 5935-00-483-4710, 5935004834710
PLATE,RETAINING,ELECTRICAL CONNE

Federal Supply Classification
FSC 5935 - Connectors, Electrical
National Item Identification Number
NIIN 004834710
Codification Country
United States
Item Name Code
INC 21538
Criticality
(X) This item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
Hazardous Material Indicator Code
(P) There is no information in the HMIRS; however, the NSN is in an FSC in Table II of Federal Standard 313 and an MSDS may be required by the user. The requirement for an MSDS is dependent on a hazard determination of the supplier or the intended end use of the product.
Availability: Request Qualified Suppliers: Currently qualifying suppliers

Manufacture or supply this part?
Join our growing community of certified suppliers.

Let Us Know
  CALL ABOUT NSN 5935-00-483-4710
Our client representatives are standing by to help fulfill your request.

+1-321-773-5710

  REQUEST QUOTE for 5935-00-483-4710


Have a list that needs to be quoted? Upload it here.

DLMS® Summary

National Stock Number 5935-00-483-4710

National Stock Number (NSN) 5935-00-483-4710, or NIIN 004834710, (plate,retaining,electrical conne) was assigned February 1, 1971 in the Federal Logistics Information System (FLIS). This NIIN is Available for Manual Assignment. This NSN does not replace any other NSNs.

There are no manufacturer part numbers associated to this NSN.

This part number has not been procured by the US Government in over 5 years.

Based on a planned procurement review by the Primary Inventory Control Activity (PICA) on Jul 01, 2019, this NSN's acquisition method was noted as: Acquire directly from the actual manufacturer, whether or not the prime contractor is the actual manufacturer. This part requires engineering source approval by the design control activity in order to maintain the quality of the part. An alternate source must qualify in accordance with the design control activity's procedures, as approved by the cognizant Government engineering activity. Valid AMCs: 1, 2, 3, 4 and 5.

This NSN is assigned to Item Name Code (INC) 21538. [A FLAT METALLIC ITEM VARIED IN SHAPE WITH AN OPENING(S) TO ACCOMMODATE AN ELECTRICAL CONNECTOR(S). IT MUST HAVE FACILITIES FOR MOUNTING. USED TO POSITION AN ELECTRICAL CONNECTOR. SEE ALSO PLATE, MOUNTING (AS MODIFIED). EXCLUDES:PLATE,WALL,ELECTRICAL AND ESCUTCHEON PLATE.]. This item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. There is no information in the HMIRS; however, the NSN is in an FSC in Table II of Federal Standard 313 and an MSDS may be required by the user. The requirement for an MSDS is dependent on a hazard determination of the supplier or the intended end use of the product. NSN 5935004834710 does not contain precious metals.

This NSN is associated to Schedule B 8548900100: electrical parts of machinery or apparatus not specified or included elsewhere in chapter 85. The Schedule B End Use is listed as electric apparatus. NAICS classification category 335999: all other miscellaneous electrical equipment and component manufacturing.

This information was last updated on .


Technical Characteristics

SPECIAL FEATURES
(FEAT) GADDITIONAL HOLES;0.188 IN. DIA 7; 0.640 IN. DIA 8; 0.750 IN DIA 1,1.267 IN. DIA WITH 0.005 IN. NOTCH TOP AND BOTTOM 2; 0.500 IN. DIA WITH 0.035 IN. NOTCH AT BOTTOM 2;CUT OUT 5.500 X 3.781 IN CENTER 1
END ITEM IDENTIFICATION
(AGAV) EPG
CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO LENGTH
(ABKQ) 16.735 INCHES NOMINAL
CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO WIDTH
(ABKR) 6.260 INCHES NOMINAL
OVERALL HEIGHT
(ABKW) 0.065 INCHES NOMINAL
OVERALL LENGTH
(ABHP) 17.235 INCHES MINIMUM AND 17.265 INCHES MAXIMUM
OVERALL WIDTH
(ABMK) 6.745 INCHES MINIMUM AND 6.765 INCHES MAXIMUM
MATERIAL
(MATT) ALUMINUM ALLOY
MOUNTING FACILITY TYPE AND QUANTITY
(AXHR) 16 UNTHREADED HOLE
SPECIAL FEATURES
(FEAT) ADDITIONAL HOLES;0.188 IN. DIA 7; 0.640 IN. DIA 8; 0.750 IN DIA 1,1.267 IN. DIA WITH 0.005 IN. NOTCH TOP AND BOTTOM 2; 0.500 IN. DIA WITH 0.035 IN. NOTCH AT BOTTOM 2;CUT OUT 5.500 X 3.781 IN CENTER 1
STYLE DESIGNATOR
(STYL) IRREGULAR SHAPE
SURFACE TREATMENT
(SFTT) PAINT
TEST DATA DOCUMENT
(TEST) 98230-0N047138 DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING)
UNTHREADED MOUNTING HOLE DIAMETER
(AEBV) 0.177 INCHES NOMINAL AND 0.203 INCHES NOMINAL
UNABLE TO DECODE
(MATL) UNABLE TO DECODE
SURFACE TREATMENT
(SURF) PAINTED
III END ITEM IDENTIFICATION
(AGAV) EPG
MATERIAL
(MATL) ALUMINUM ALLOY
III STYLE DESIGNATOR
(STYL) IRREGULAR SHAPE
UNABLE TO DECODE
(SURF) UNABLE TO DECODE

Manufacturer Part Numbers


Related Inventory



 
Top