ISO Group Logo
Defense and Aerospace
Supply Chain Partner
A Dynatech International Company


NSN 5935-00-810-3394, 5935008103394
JACK,TELEPHONE

Federal Supply Classification
FSC 5935 - Connectors, Electrical
National Item Identification Number
NIIN 008103394
Codification Country
United States
Item Name Code
INC 00124
Criticality
(X) This item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
Hazardous Material Indicator Code
(P) There is no information in the HMIRS; however, the NSN is in an FSC in Table II of Federal Standard 313 and an MSDS may be required by the user. The requirement for an MSDS is dependent on a hazard determination of the supplier or the intended end use of the product.
Availability: Request Qualified Suppliers: Currently qualifying suppliers

Manufacture or supply this part?
Join our growing community of certified suppliers.

Let Us Know
  CALL ABOUT NSN 5935-00-810-3394
Our client representatives are standing by to help fulfill your request.

+1-321-773-5710

  REQUEST QUOTE for 5935-00-810-3394


Have a list that needs to be quoted? Upload it here.

DLMS® Summary

National Stock Number 5935-00-810-3394

National Stock Number (NSN) 5935-00-810-3394, or NIIN 008103394, (jack,telephone) was assigned January 1, 1962 in the Federal Logistics Information System (FLIS). This NSN does not replace any other NSNs.

There are 3 manufacturer part numbers associated with this NSN. 2 of those part number(s) are considered obsolete. The manufacturer part numbers were originally supplied by 2 suppliers. Today, one supplier is listed as an Active supplier for this NSN. Of the active suppliers, there are no suppliers that are deemed design controlled or valid supply parts.

This part number has not been procured by the US Government in over 5 years.

Based on a planned procurement review by the Primary Inventory Control Activity (PICA) on Nov 02, 2005, this NSN's acquisition method was noted as: Acquire directly from the actual manufacturer, whether or not the prime contractor is the actual manufacturer. The annual buy value of this part falls below the screening threshold of $10,000 but it has been screened for known source(s). (NOTE: This code shall not be used when screening parts entering the inventory. It shall not be assigned in preference to or supersede any other AMSC.) Valid AMCs: 1, 2, 3, 4 and 5.

This NSN is assigned to Item Name Code (INC) 00124. [A CONTACT SPRING TYPE ELECTRICAL FITTING OF TWO OR MORE CONDUCTORS, WHICH IS ARRANGED FOR THE INSERTION OF A PLUG,TELEPHONE. ONE CONDUCTOR MAY BE GROUNDED. DOES NOT INCLUDE SEPARABLE TELEPHONE JACKS WHICH ARE TERMED, JACK ASSEM BLY,TELEPHONE. EXCLUDES:JACK,TIP.]. This item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. There is no information in the HMIRS; however, the NSN is in an FSC in Table II of Federal Standard 313 and an MSDS may be required by the user. The requirement for an MSDS is dependent on a hazard determination of the supplier or the intended end use of the product. NSN 5935008103394 contains a combination of two or more precious metals (silver,gold, platinum).

This information was last updated on .


Technical Characteristics

BUSHING THRU-HOLE ACCOMMODATION WIDTH
(AFYQ) 0.391 INCHES NOMINAL
MATERIAL
(MATT) PLASTIC PHENOLIC INSULATOR
PRECIOUS MATERIAL AND LOCATION
(PMLC) TERMINAL MATERIAL AND CONTACT SPRING SURFACES SILVER
III PRECIOUS MATERIAL
(PRMT) SILVER
UNABLE TO DECODE
(SURF) UNABLE TO DECODE
MOUNTING BUSHING LENGTH
(ADAP) 0.281 INCHES NOMINAL
MATERIAL
(MATT) COPPER ALLOY 745 TERMINAL
SURFACE TREATMENT
(SFTT) TIN TERMINAL
SURFACE TREATMENT
(SURF) TIN TERMINAL
BODY STYLE
(AAQL) RIGHT ANGLE THREADED BUSHING MOUNTED SHORT FRAME
MATERIAL
(MATT) COPPER ALLOY BUSHING
ELECTRICAL INSULATION FEATURE
(AALV) INSULATED FROM PANEL
ACCOMMODATED FINGER TYPE
(AFXS) THREE CONDUCTOR, CONE TIP SINGLE FINGER
UNABLE TO DECODE
(MATL) UNABLE TO DECODEUNABLE TO DECODE
UNABLE TO DECODE
(AFRX) UNABLE TO DECODE
BUSHING THRU-HOLE ACCOMMODATION LENGTH
(AFYP) 0.355 INCHES NOMINAL
JACK CONTACT ARRANGEMENT DESIGNATOR
(AFZK) J2
MATERIAL
(MATL) STEEL BODY
SURFACE TREATMENT
(SFTT) NICKEL SILVER SPRING
SURFACE TREATMENT
(SURF) PALLADIUM CONTACT
THREAD DIRECTION
(AAJF) RIGHT-HAND
OVERALL WIDTH
(ABMK) 0.938 INCHES NOMINAL
BUSHING ACCOMMODATION HOLE SHAPE
(AFRX) ROUND W/FLAT
PRECIOUS MATERIAL
(PRMT) SILVER
OVERALL LENGTH
(ABHP) 1.906 INCHES NOMINAL
TERMINAL TYPE
(CSCF) TAB, SOLDER LUG
MATERIAL
(MATL) ANY ACCEPTABLE CONTACT
MATERIAL
(MATT) STEEL BODY
III PRECIOUS MATERIAL AND LOCATION
(PMLC) TERMINAL MATERIAL AND CONTACT SPRING SURFACES SILVER
SURFACE TREATMENT
(SFTT) PALLADIUM CONTACT
THREAD SERIES DESIGNATOR
(THSD) UNEF
THREAD QUANTITY PER INCH
(CMLP) 32
NOMINAL THREAD SIZE
(CQJX) 0.375 INCHES
MATERIAL
(MATL) NICKEL SILVER ALLOY SPRING
MATERIAL
(MATL) NICKEL SILVER ALLOY TERMINAL
UNABLE TO DECODE
(MATL) UNABLE TO DECODE
THREAD CLASS
(AAJD) 2A
MATERIAL
(MATL) BRASS BUSHING
MATERIAL
(MATL) PLASTIC, PHENOLIC INSULATOR
FINGER ACCOMMODATION LENGTH
(AFXZ) 1.188 INCHES NOMINAL SINGLE FINGER
MOUNTING FACILITY TYPE AND QUANTITY
(AXHR) 1 BUSHING
SURFACE TREATMENT
(SURF) NICKEL SILVER SPRING
FINGER ACCOMMODATION DIAMETER
(AFXY) 0.250 INCHES NOMINAL SINGLE FINGER
BUSHING ACCOMMODATION HOLE SHAPE
(CXCJ) ROUND W/FLAT
MATERIAL
(MATT) COPPER ALLOY 745 SPRING

Manufacturer Part Numbers


Related Inventory



 
Top