ISO Group Logo
Defense and Aerospace
Supply Chain Partner
A Dynatech International Company


NSN 5935-00-931-7587, 5935009317587
JACK,TIP

Federal Supply Classification
FSC 5935 - Connectors, Electrical
National Item Identification Number
NIIN 009317587
Codification Country
United States
Item Name Code
INC 15077
Criticality
(X) This item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
Hazardous Material Indicator Code
(P) There is no information in the HMIRS; however, the NSN is in an FSC in Table II of Federal Standard 313 and an MSDS may be required by the user. The requirement for an MSDS is dependent on a hazard determination of the supplier or the intended end use of the product.
Availability: Readily Available Qualified Suppliers: Currently qualifying suppliers

Manufacture or supply this part?
Join our growing community of certified suppliers.

Let Us Know
  CALL ABOUT NSN 5935-00-931-7587
Our client representatives are standing by to help fulfill your request.

+1-321-773-5710

  REQUEST QUOTE for 5935-00-931-7587


Have a list that needs to be quoted? Upload it here.

DLMS® Summary

National Stock Number 5935-00-931-7587

National Stock Number (NSN) 5935-00-931-7587, or NIIN 009317587, (jack,tip) was assigned September 19, 1966 in the Federal Logistics Information System (FLIS). This NIIN is Available for Manual Assignment. This NSN does not replace any other NSNs.

There are 2 manufacturer part numbers associated with this NSN. One of those part number(s) are considered obsolete. The manufacturer part numbers were originally supplied by 2 suppliers. Today, 2 suppliers are listed as Active suppliers for this NSN. Of the active suppliers, only one supplier is deemed design controlled or valid supply parts.

This part number has not been procured by the US Government in over 5 years.

Based on a planned procurement review by the Primary Inventory Control Activity (PICA) on Nov 01, 2020, this NSN's acquisition method was noted as: Acquire directly from the actual manufacturer, whether or not the prime contractor is the actual manufacturer. The Government physically does not have in its possession sufficient, accurate, or legible data to purchase this part from other than current source(s). (NOTE: This code is applicable only to parts under immediate buy requirements and only as long as the deficiency is under review for resolution and appropriate recoding.) Valid AMCs: 1, 2, 3, 4 and 5.

This NSN is assigned to Item Name Code (INC) 15077. [AN ELECTRICAL FITTING WITH A FEMALE CONTACT ARRANGED FOR THE INSERTION OF A PLUG, TIP OR A TIP, TEST PROD. IT HAS A SINGLE FACILITY FOR ATTACHMENT OF A CONDUCTOR OR FACILITY FOR CIRCUIT CONNECTION THROUGH ITS MOUNTING PROVISIONS. THE ITEM MAY OR MAY NOT BE INSULATED. EXCLUDES:MULTISECTION TYPES EACH SECTION OF WHICH CONSISTS OF A SINGLE CONTACT SPRING OR TELEPHONE-TYPE JACK. EXCLUDES:CONNECTOR, RECEPTACLE ELECTRICAL; JACK, TELEPHONE; JACK ASSEMBLY, TIP; AND POST, BINDING.]. This item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. There is no information in the HMIRS; however, the NSN is in an FSC in Table II of Federal Standard 313 and an MSDS may be required by the user. The requirement for an MSDS is dependent on a hazard determination of the supplier or the intended end use of the product. NSN 5935009317587 contains gold.

This NSN is associated to Schedule B 8548900100: electrical parts of machinery or apparatus not specified or included elsewhere in chapter 85. The Schedule B End Use is listed as electric apparatus. NAICS classification category 335999: all other miscellaneous electrical equipment and component manufacturing.

This information was last updated on .


Technical Characteristics

SURFACE TREATMENT
(SURF) GOLD SPRING
III PRECIOUS MATERIAL AND LOCATION
(PMLC) CONTACT SPRINGS AND TERMINAL SURFACES GOLD
UNABLE TO DECODE
(SURF) UNABLE TO DECODE
MATERIAL
(MATT) PLASTIC POLYAMIDE CAP
III PRECIOUS MATERIAL
(PRMT) GOLD
SURFACE TREATMENT
(SURF) GOLD TERMINAL
MATERIAL
(MATT) PLASTIC POLYAMIDE INSULATOR
III ACCOMMODATED FINGER TYPE
(AFXS) TEST PROD STEPPED SINGLE FINGER
MATERIAL
(MATL) BERYLLIUM COPPER SPRING
MATERIAL
(MATL) PLASTIC, POLYAMIDE INSULATOR
MATERIAL
(MATL) PLASTIC, POLYAMIDE CAP
MATERIAL
(MATL) BERYLLIUM COPPER TERMINAL
MATERIAL
(MATL) BRASS BODY
MATERIAL
(MATL) BRASS BUSHING
UNABLE TO DECODE
(MATL) UNABLE TO DECODE
ELECTRICAL INSULATION FEATURE
(AALV) INSULATED COMPLETELY
ACCOMMODATED FINGER TYPE
(AFXS) TEST PROD STEPPED SINGLE FINGER
BODY LENGTH
(ADAQ) 0.370 INCHES NOMINAL
BODY STYLE
(AAQL) PRESS FIT
BUSHING ACCOMMODATION HOLE SHAPE
(AFRX) ROUND
BUSHING THRU-HOLE ACCOMMODATION DIAMETER
(AFYM) 0.134 INCHES NOMINAL
FINGER ACCOMMODATION DIAMETER
(AFXY) 0.080 INCHES NOMINAL SINGLE FINGER
FINGER ACCOMMODATION LENGTH
(AFXZ) 0.250 INCHES NOMINAL SINGLE FINGER
IDENTIFICATION CODE COLOR
(AAPC) WHITE
OVERALL DIAMETER
(ADAV) 0.228 INCHES NOMINAL
OVERALL LENGTH
(ABHP) 0.546 INCHES NOMINAL
MATERIAL
(MATT) COPPER ALLOY BODY
MATERIAL
(MATT) COPPER ALLOY BUSHING
MATERIAL
(MATT) COPPER ALLOY TERMINAL
MATERIAL
(MATT) COPPER ALLOY SPRING
MATERIAL
(MATT) PLASTIC POLYAMIDE (NYLON) CAP
MATERIAL
(MATT) PLASTIC POLYAMIDE (NYLON) INSULATOR
MOUNTING FACILITY TYPE AND QUANTITY
(AXHR) 1 BUSHING
PRECIOUS MATERIAL AND LOCATION
(PMLC) CONTACT SPRINGS AND TERMINAL SURFACES GOLD
PRECIOUS MATERIAL
(PRMT) GOLD
SURFACE TREATMENT
(SFTT) GOLD SPRING
SURFACE TREATMENT
(SFTT) GOLD TERMINAL
TERMINAL TYPE
(CSCF) PIN

Manufacturer Part Numbers


Related Inventory

TJ-358W
Condition NE
Readily Available


 
Top