ISO Group Logo
Defense and Aerospace
Supply Chain Partner
A Dynatech International Company


NSN 5935-00-967-5722, 5935009675722
JACK,TIP

Federal Supply Classification
FSC 5935 - Connectors, Electrical
National Item Identification Number
NIIN 009675722
Codification Country
United States
Item Name Code
INC 15077
Criticality
(X) This item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
Hazardous Material Indicator Code
(P) There is no information in the HMIRS; however, the NSN is in an FSC in Table II of Federal Standard 313 and an MSDS may be required by the user. The requirement for an MSDS is dependent on a hazard determination of the supplier or the intended end use of the product.
Availability: Readily Available Qualified Suppliers: Currently qualifying suppliers

Manufacture or supply this part?
Join our growing community of certified suppliers.

Let Us Know
  CALL ABOUT NSN 5935-00-967-5722
Our client representatives are standing by to help fulfill your request.

+1-321-773-5710

  REQUEST QUOTE for 5935-00-967-5722


Have a list that needs to be quoted? Upload it here.

DLMS® Summary

National Stock Number 5935-00-967-5722

National Stock Number (NSN) 5935-00-967-5722, or NIIN 009675722, (jack,tip) was assigned June 3, 1966 in the Federal Logistics Information System (FLIS). This NIIN is Available for Manual Assignment. This NSN does not replace any other NSNs.

There are 2 manufacturer part numbers associated with this NSN. None of the associated part number(s) are considered obsolete. The manufacturer part numbers were originally supplied by 2 suppliers. Today, one supplier is listed as an Active supplier for this NSN. Of the active suppliers, there are no suppliers that are deemed design controlled or valid supply parts.

This part number has not been procured by the US Government in over 5 years.

This NSN is unique to one weapons system.

Based on a planned procurement review by the Primary Inventory Control Activity (PICA) on Nov 02, 2005, this NSN's acquisition method was noted as: Acquire directly from the actual manufacturer, whether or not the prime contractor is the actual manufacturer. The annual buy value of this part falls below the screening threshold of $10,000 but it has been screened for known source(s). (NOTE: This code shall not be used when screening parts entering the inventory. It shall not be assigned in preference to or supersede any other AMSC.) Valid AMCs: 1, 2, 3, 4 and 5.

This NSN is assigned to Item Name Code (INC) 15077. [AN ELECTRICAL FITTING WITH A FEMALE CONTACT ARRANGED FOR THE INSERTION OF A PLUG, TIP OR A TIP, TEST PROD. IT HAS A SINGLE FACILITY FOR ATTACHMENT OF A CONDUCTOR OR FACILITY FOR CIRCUIT CONNECTION THROUGH ITS MOUNTING PROVISIONS. THE ITEM MAY OR MAY NOT BE INSULATED. EXCLUDES:MULTISECTION TYPES EACH SECTION OF WHICH CONSISTS OF A SINGLE CONTACT SPRING OR TELEPHONE-TYPE JACK. EXCLUDES:CONNECTOR, RECEPTACLE ELECTRICAL; JACK, TELEPHONE; JACK ASSEMBLY, TIP; AND POST, BINDING.]. This item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. There is no information in the HMIRS; however, the NSN is in an FSC in Table II of Federal Standard 313 and an MSDS may be required by the user. The requirement for an MSDS is dependent on a hazard determination of the supplier or the intended end use of the product. NSN 5935009675722 contains gold.

This NSN is associated to Schedule B 8548900100: electrical parts of machinery or apparatus not specified or included elsewhere in chapter 85. The Schedule B End Use is listed as electric apparatus. NAICS classification category 335999: all other miscellaneous electrical equipment and component manufacturing.

This information was last updated on .


Technical Characteristics

III ACCOMMODATED FINGER TYPE
(AFXS) TEST PROD SINGLE FINGER
MATERIAL
(MATL) BRASS TERMINAL
III PRECIOUS MATERIAL
(PRMT) GOLD
MATERIAL
(MATL) BRASS CONTACT
SURFACE TREATMENT
(SURF) GOLD CONTACT
SURFACE TREATMENT
(SURF) GOLD TERMINAL
III PRECIOUS MATERIAL AND LOCATION
(PMLC) CONTACT AND TERMINAL SURFACES GOLD
UNABLE TO DECODE
(MATL) UNABLE TO DECODE
MATERIAL
(MATL) PLASTIC, POLYTETRAFLUOROETHYLENE INSULATOR
MATERIAL
(MATL) PLASTIC, POLYTETRAFLUOROETHYLENE BODY
MATERIAL
(MATL) PLASTIC, POLYTETRAFLUOROETHYLENE CAP
UNABLE TO DECODE
(SURF) UNABLE TO DECODE
ELECTRICAL INSULATION FEATURE
(AALV) INSULATED FROM PANEL
ACCOMMODATED FINGER TYPE
(AFXS) TEST PROD SINGLE FINGER
BODY LENGTH
(ADAQ) 0.388 INCHES MINIMUM AND 0.442 INCHES MAXIMUM
BODY STYLE
(AAQL) PRESS FIT
BUSHING ACCOMMODATION HOLE SHAPE
(AFRX) ROUND
BUSHING THRU-HOLE ACCOMMODATION DIAMETER
(AFYM) 0.246 INCHES MINIMUM AND 0.249 INCHES MAXIMUM
FINGER ACCOMMODATION DIAMETER
(AFXY) 0.078 INCHES MINIMUM AND 0.084 INCHES MAXIMUM SINGLE FINGER
FINGER ACCOMMODATION LENGTH
(AFXZ) 0.375 INCHES NOMINAL SINGLE FINGER
IDENTIFICATION CODE COLOR
(AAPC) RED
OVERALL DIAMETER
(ADAV) 0.300 INCHES MINIMUM AND 0.320 INCHES MAXIMUM
OVERALL LENGTH
(ABHP) 0.530 INCHES MINIMUM AND 0.590 INCHES MAXIMUM
MATERIAL
(MATT) COPPER ALLOY CONTACT
MATERIAL
(MATT) COPPER ALLOY TERMINAL
MATERIAL
(MATT) PLASTIC POLYTETRAFLUOROETHYLENE BODY
MATERIAL
(MATT) PLASTIC POLYTETRAFLUOROETHYLENE CAP
MATERIAL
(MATT) PLASTIC POLYTETRAFLUOROETHYLENE INSULATOR
MOUNTING FACILITY TYPE AND QUANTITY
(AXHR) 1 BUSHING
PRECIOUS MATERIAL AND LOCATION
(PMLC) CONTACT AND TERMINAL SURFACES GOLD
PRECIOUS MATERIAL
(PRMT) GOLD
SURFACE TREATMENT
(SFTT) GOLD CONTACT
SURFACE TREATMENT
(SFTT) GOLD TERMINAL
TERMINAL TYPE
(CSCF) TURRET

Manufacturer Part Numbers


Related Inventory

X1371RED
TOX1371RED
Condition NE
Tornado OEM Par
Readily Available


 
Top