ISO Group Logo
Defense and Aerospace
Supply Chain Partner
A Dynatech International Company


NSN 5935-01-005-9802, 5935010059802
Cancelled -> Replaced by 5935010908675

Federal Supply Classification
FSC 5935 - Connectors, Electrical
National Item Identification Number
NIIN 010059802
Codification Country
United States
Item Name Code
INC 15077
Criticality
(X) This item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
Hazardous Material Indicator Code
(P) There is no information in the HMIRS; however, the NSN is in an FSC in Table II of Federal Standard 313 and an MSDS may be required by the user. The requirement for an MSDS is dependent on a hazard determination of the supplier or the intended end use of the product.
Availability: Readily Available Qualified Suppliers: Currently qualifying suppliers

Manufacture or supply this part?
Join our growing community of certified suppliers.

Let Us Know
  CALL ABOUT NSN 5935-01-005-9802
Our client representatives are standing by to help fulfill your request.

+1-321-773-5710

  REQUEST QUOTE for 5935-01-005-9802


Have a list that needs to be quoted? Upload it here.

DLMS® Summary

National Stock Number 5935-01-005-9802

National Stock Number (NSN) 5935-01-005-9802, or NIIN 010059802, (jack,tip) was assigned July 13, 1975 in the Federal Logistics Information System (FLIS). This NIIN is Available for Manual Assignment. This NSN replaces 1 stock number, 5935010908675.

There are 4 manufacturer part numbers associated with this NSN. One of those part number(s) are considered obsolete. The manufacturer part numbers were originally supplied by 3 suppliers. Today, 2 suppliers are listed as Active suppliers for this NSN. Of the active suppliers, only one supplier is deemed design controlled or valid supply parts.

This part number has not been procured by the US Government in over 5 years.

This NSN is somewhat common among different platforms, belonging to 2 different weapons systems.

There has been very little demand for this national stock number. The demand for this NSN originated from less than 5 countries. Based on a planned procurement review by the Primary Inventory Control Activity (PICA) on Jan 01, 2013, this NSN's acquisition method was noted as: Acquire directly from the actual manufacturer, whether or not the prime contractor is the actual manufacturer. The data or the rights to use the data needed to purchase this part from additional sources are not owned by the Government and it has been determined that it is uneconomical to purchase them. Valid AMCs: 1, 2, 3, 4 and 5.

This NSN is assigned to Item Name Code (INC) 15077. [AN ELECTRICAL FITTING WITH A FEMALE CONTACT ARRANGED FOR THE INSERTION OF A PLUG, TIP OR A TIP, TEST PROD. IT HAS A SINGLE FACILITY FOR ATTACHMENT OF A CONDUCTOR OR FACILITY FOR CIRCUIT CONNECTION THROUGH ITS MOUNTING PROVISIONS. THE ITEM MAY OR MAY NOT BE INSULATED. EXCLUDES:MULTISECTION TYPES EACH SECTION OF WHICH CONSISTS OF A SINGLE CONTACT SPRING OR TELEPHONE-TYPE JACK. EXCLUDES:CONNECTOR, RECEPTACLE ELECTRICAL; JACK, TELEPHONE; JACK ASSEMBLY, TIP; AND POST, BINDING.]. This item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. There is no information in the HMIRS; however, the NSN is in an FSC in Table II of Federal Standard 313 and an MSDS may be required by the user. The requirement for an MSDS is dependent on a hazard determination of the supplier or the intended end use of the product. NSN 5935010059802 contains gold.

This NSN is associated to Schedule B 8548900100: electrical parts of machinery or apparatus not specified or included elsewhere in chapter 85. The Schedule B End Use is listed as electric apparatus. NAICS classification category 335999: all other miscellaneous electrical equipment and component manufacturing.

This information was last updated on .


Technical Characteristics

MATERIAL
(MATL) BRASS BODY
MATERIAL
(MATL) BRASS BUSHING
SURFACE TREATMENT
(SURF) GOLD SPRING AND COPPER SPRING
III ACCOMMODATED FINGER TYPE
(AFXS) NEEDLE POINT SINGLE FINGER
UNABLE TO DECODE
(MATL) UNABLE TO DECODE
ELECTRICAL INSULATION FEATURE
(AALV) UNINSULATED
ACCOMMODATED FINGER TYPE
(AFXS) NEEDLE POINT SINGLE FINGER
BODY LENGTH
(ADAQ) 0.270 INCHES NOMINAL
BODY STYLE
(AAQL) PRESS FIT MOUNTED
BUSHING ACCOMMODATION HOLE SHAPE
(AFRX) ROUND
BUSHING THRU-HOLE ACCOMMODATION DIAMETER
(AFYM) 0.066 INCHES MINIMUM AND 0.070 INCHES MAXIMUM
FINGER ACCOMMODATION DIAMETER
(AFXY) 0.032 INCHES NOMINAL SINGLE FINGER
IDENTIFICATION CODE COLOR
(AAPC) NATURAL
OVERALL DIAMETER
(ADAV) 0.090 INCHES MINIMUM AND 0.096 INCHES MAXIMUM
MATERIAL
(MATT) COPPER ALLOY BODY
MATERIAL
(MATT) COPPER ALLOY BUSHING
MATERIAL
(MATT) COPPER ALLOY CAP
MATERIAL
(MATT) COPPER ALLOY TERMINAL
MATERIAL
(MATT) COPPER ALLOY SPRING
MOUNTING BUSHING DIAMETER
(AFYE) 0.066 INCHES MINIMUM AND 0.070 INCHES MAXIMUM
MOUNTING BUSHING LENGTH
(ADAP) 0.228 INCHES MINIMUM AND 0.242 INCHES MAXIMUM
MOUNTING FACILITY TYPE AND QUANTITY
(AXHR) 1 BUSHING
PRECIOUS MATERIAL AND LOCATION
(PMLC) SPRING SURFACES GOLD
PRECIOUS MATERIAL
(PRMT) GOLD
SURFACE TREATMENT
(SFTT) GOLD AND COPPER SPRING
TERMINAL TYPE
(CSCF) SOLDER WELL
III PRECIOUS MATERIAL AND LOCATION
(PMLC) SPRING SURFACES GOLD
MATERIAL
(MATL) BRASS CAP
MATERIAL
(MATL) BRASS TERMINAL
MATERIAL
(MATL) BERYLLIUM COPPER SPRING
III PRECIOUS MATERIAL
(PRMT) GOLD

Manufacturer Part Numbers


Related Inventory

450-7004-01-03-00
Condition NE
Readily Available
70041030

Condition NE
JLG Assembly We
Readily Available
1517004-103
Condition FN
Desc: BUSHING;
Readily Available
2007004-103
1620-01-253-5221
Condition NE
PIN ASSY
Readily Available


 
Top