ISO Group Logo
Defense and Aerospace
Supply Chain Partner
A Dynatech International Company


NSN 5935-01-074-8406, 5935010748406
JACK,TIP

Federal Supply Classification
FSC 5935 - Connectors, Electrical
National Item Identification Number
NIIN 010748406
Codification Country
United States
Item Name Code
INC 15077
Criticality
(X) This item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
Hazardous Material Indicator Code
(P) There is no information in the HMIRS; however, the NSN is in an FSC in Table II of Federal Standard 313 and an MSDS may be required by the user. The requirement for an MSDS is dependent on a hazard determination of the supplier or the intended end use of the product.
Availability: Readily Available Qualified Suppliers: Currently qualifying suppliers

Manufacture or supply this part?
Join our growing community of certified suppliers.

Let Us Know
  CALL ABOUT NSN 5935-01-074-8406
Our client representatives are standing by to help fulfill your request.

+1-321-773-5710

  REQUEST QUOTE for 5935-01-074-8406


Have a list that needs to be quoted? Upload it here.

DLMS® Summary

National Stock Number 5935-01-074-8406

National Stock Number (NSN) 5935-01-074-8406, or NIIN 010748406, (jack,tip) was assigned April 9, 1979 in the Federal Logistics Information System (FLIS). This NIIN is Available for Manual Assignment. This NSN does not replace any other NSNs.

There is only one manufacturer part number associated with this NSN. None of the associated part number(s) are considered obsolete. The manufacturer part numbers were originally supplied by one supplier. Today, there are no suppliers listed as an Active supplier for this NSN. Of the active suppliers, there are no suppliers that are deemed design controlled or valid supply parts.

This part number has not been procured by the US Government in over 5 years.

There has been very little demand for this national stock number. The demand for this NSN originated from less than 5 countries. Based on a planned procurement review by the Primary Inventory Control Activity (PICA) on Nov 02, 2005, this NSN's acquisition method was noted as: Acquire directly from the actual manufacturer, whether or not the prime contractor is the actual manufacturer. The annual buy value of this part falls below the screening threshold of $10,000 but it has been screened for known source(s). (NOTE: This code shall not be used when screening parts entering the inventory. It shall not be assigned in preference to or supersede any other AMSC.) Valid AMCs: 1, 2, 3, 4 and 5.

This NSN is assigned to Item Name Code (INC) 15077. [AN ELECTRICAL FITTING WITH A FEMALE CONTACT ARRANGED FOR THE INSERTION OF A PLUG, TIP OR A TIP, TEST PROD. IT HAS A SINGLE FACILITY FOR ATTACHMENT OF A CONDUCTOR OR FACILITY FOR CIRCUIT CONNECTION THROUGH ITS MOUNTING PROVISIONS. THE ITEM MAY OR MAY NOT BE INSULATED. EXCLUDES:MULTISECTION TYPES EACH SECTION OF WHICH CONSISTS OF A SINGLE CONTACT SPRING OR TELEPHONE-TYPE JACK. EXCLUDES:CONNECTOR, RECEPTACLE ELECTRICAL; JACK, TELEPHONE; JACK ASSEMBLY, TIP; AND POST, BINDING.]. This item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. There is no information in the HMIRS; however, the NSN is in an FSC in Table II of Federal Standard 313 and an MSDS may be required by the user. The requirement for an MSDS is dependent on a hazard determination of the supplier or the intended end use of the product. NSN 5935010748406 contains gold.

This NSN is associated to Schedule B 8548900100: electrical parts of machinery or apparatus not specified or included elsewhere in chapter 85. The Schedule B End Use is listed as electric apparatus. NAICS classification category 335999: all other miscellaneous electrical equipment and component manufacturing.

This information was last updated on .


Technical Characteristics

MATERIAL
(MATL) BRASS BODY
MATERIAL
(MATT) COPPER ALLOY BODY
ACCOMMODATED FINGER TYPE
(AFXS) TEST PROD STEPPED SINGLE FINGER
SURFACE TREATMENT
(SURF) CADMIUM BODY
UNABLE TO DECODE
(SURF) UNABLE TO DECODE
III ACCOMMODATED FINGER TYPE
(AFXS) TEST PROD STEPPED SINGLE FINGER
III PRECIOUS MATERIAL AND LOCATION
(PMLC) TERMINAL SURFACE GOLD
MATERIAL
(MATL) PLASTIC, FLUORINATED ETHYLENE PROPYLENE INSULATOR
SURFACE TREATMENT
(SURF) GOLD TERMINAL
FINGER ACCOMMODATION DIAMETER
(AFXY) 0.081 INCHES NOMINAL SINGLE FINGER
UNABLE TO DECODE
(MATL) UNABLE TO DECODE
SURFACE TREATMENT
(SFTT) CADMIUM BODY
ACCOMMODATED FINGER TYPE
(AFXS) UNABLE TO DECODE
BODY LENGTH
(ADAQ) 0.410 INCHES NOMINAL
BODY STYLE
(AAQL) THREADED BUSHING MOUNTED
BUSHING ACCOMMODATION HOLE SHAPE
(AFRX) ROUND
BUSHING THRU-HOLE ACCOMMODATION DIAMETER
(AFYM) 0.250 INCHES NOMINAL
CURRENT RATING IN AMPS
(AMPS) 6.0
ELECTRICAL INSULATION FEATURE
(AALV) INSULATED FROM PANEL
FINGER ACCOMMODATION DIAMETER
(AFXY) UNABLE TO DECODE
IDENTIFICATION CODE COLOR
(AAPC) RED
MATERIAL
(MATT) UNABLE TO DECODE
MOUNTING BUSHING LENGTH
(ADAP) 0.235 INCHES NOMINAL
MOUNTING FACILITY TYPE AND QUANTITY
(AXHR) 1 BUSHING
NOMINAL THREAD LENGTH
(AKMG) 0.235 INCHES
NOMINAL THREAD SIZE
(CQJX) 0.250 INCHES
OVERALL DIAMETER
(ADAV) 0.312 INCHES NOMINAL
OVERALL LENGTH
(ABHP) 0.560 INCHES NOMINAL
PRECIOUS MATERIAL
(PRMT) GOLD
PRECIOUS MATERIAL AND LOCATION
(PMLC) TERMINAL SURFACE GOLD
SURFACE TREATMENT
(SFTT) UNABLE TO DECODE
TERMINAL TYPE
(CSCF) TURRET
THREAD CLASS
(AAJD) 2A
THREAD DIRECTION
(AAJF) RIGHT-HAND
THREAD QUANTITY PER INCH
(CMLP) 32
THREAD SERIES DESIGNATOR
(THSD) UNEF
SURFACE TREATMENT
(SFTT) GOLD TERMINAL
III PRECIOUS MATERIAL
(PRMT) GOLD
MATERIAL
(MATL) BRASS TERMINAL
MATERIAL
(MATT) PLASTIC FLUORINATED ETHYLENE PROPYLENE INSULATOR
MATERIAL
(MATT) COPPER ALLOY TERMINAL

Manufacturer Part Numbers


Related Inventory

HS2-FT-0375RED
WMHS2-FT-0375-2
Condition NE

Request
SM3-6038RED
WMHSSM3-60-.375-
Condition NE

Request
M230532-207-2
WMHSPVC-.375-RED
Condition NE

Request
SM3-12M230535-107-23
WMHSSM3-12-.375-
Condition NE

Request
PET38RED
WMEXPET0.375RED
Condition NE

Request


 
Top