ISO Group Logo
Defense and Aerospace
Supply Chain Partner
A Dynatech International Company


NSN 5935-01-092-2644, 5935010922644
JACK,TELEPHONE

Federal Supply Classification
FSC 5935 - Connectors, Electrical
National Item Identification Number
NIIN 010922644
Codification Country
United States
Item Name Code
INC 00124
Criticality
(X) This item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
Hazardous Material Indicator Code
(P) There is no information in the HMIRS; however, the NSN is in an FSC in Table II of Federal Standard 313 and an MSDS may be required by the user. The requirement for an MSDS is dependent on a hazard determination of the supplier or the intended end use of the product.
Availability: Readily Available Qualified Suppliers: Currently qualifying suppliers

Manufacture or supply this part?
Join our growing community of certified suppliers.

Let Us Know
  CALL ABOUT NSN 5935-01-092-2644
Our client representatives are standing by to help fulfill your request.

+1-321-773-5710

  REQUEST QUOTE for 5935-01-092-2644


Have a list that needs to be quoted? Upload it here.

DLMS® Summary

National Stock Number 5935-01-092-2644

National Stock Number (NSN) 5935-01-092-2644, or NIIN 010922644, (jack,telephone) was assigned March 22, 1980 in the Federal Logistics Information System (FLIS). This NIIN is Available for Manual Assignment. This NSN does not replace any other NSNs.

There is only one manufacturer part number associated with this NSN. None of the associated part number(s) are considered obsolete. The manufacturer part numbers were originally supplied by one supplier. Today, one supplier is listed as an Active supplier for this NSN. Of the active suppliers, there are no suppliers that are deemed design controlled or valid supply parts.

This part number has not been procured by the US Government in over 5 years.

Based on a planned procurement review by the Primary Inventory Control Activity (PICA) on Nov 02, 2005, this NSN's acquisition method was noted as: Acquire directly from the actual manufacturer, whether or not the prime contractor is the actual manufacturer. The annual buy value of this part falls below the screening threshold of $10,000 but it has been screened for known source(s). (NOTE: This code shall not be used when screening parts entering the inventory. It shall not be assigned in preference to or supersede any other AMSC.) Valid AMCs: 1, 2, 3, 4 and 5.

This NSN is assigned to Item Name Code (INC) 00124. [A CONTACT SPRING TYPE ELECTRICAL FITTING OF TWO OR MORE CONDUCTORS, WHICH IS ARRANGED FOR THE INSERTION OF A PLUG,TELEPHONE. ONE CONDUCTOR MAY BE GROUNDED. DOES NOT INCLUDE SEPARABLE TELEPHONE JACKS WHICH ARE TERMED, JACK ASSEM BLY,TELEPHONE. EXCLUDES:JACK,TIP.]. This item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. There is no information in the HMIRS; however, the NSN is in an FSC in Table II of Federal Standard 313 and an MSDS may be required by the user. The requirement for an MSDS is dependent on a hazard determination of the supplier or the intended end use of the product. NSN 5935010922644 contains gold.

This NSN is associated to Schedule B 8517700000: parts for apparatus for transmission or reception of voice, images or other data, including apparatus for communication in a wired or wireless network. The Schedule B End Use is listed as telecommunications equipment. NAICS classification category 334220: radio and television broadcasting and wireless communications equipment manufacturing.

This information was last updated on .


Technical Characteristics

MATERIAL
(MATL) STEEL BODY
MATERIAL
(MATL) GOLD CONTACT
SURFACE TREATMENT
(SURF) CADMIUM BODY AND CHROMIUM BODY
ELECTRICAL INSULATION FEATURE
(AALV) INSULATED FROM PANEL
ACCOMMODATED FINGER TYPE
(AFXS) THREE CONDUCTOR, CONE TIP SINGLE FINGER
BODY STYLE
(AAQL) BUSHING MOUNTED LONG FRAME
BODY WIDTH
(ADAT) 0.316 INCHES NOMINAL
BUSHING ACCOMMODATION HOLE SHAPE
(CXCJ) ROUND
BUSHING THRU-HOLE ACCOMMODATION DIAMETER
(AFYM) 0.248 INCHES MINIMUM AND 0.250 INCHES MAXIMUM
FINGER ACCOMMODATION DIAMETER
(AFXY) 0.175 INCHES MINIMUM AND 0.195 INCHES MAXIMUM SINGLE FINGER
FINGER ACCOMMODATION LENGTH
(AFXZ) 0.780 INCHES NOMINAL SINGLE FINGER
JACK CONTACT ARRANGEMENT DESIGNATOR
(AFZK) J10-2A-1B
OVERALL HEIGHT
(ABKW) 0.650 INCHES NOMINAL
OVERALL LENGTH
(ABHP) 2.560 INCHES MAXIMUM
MATERIAL
(MATT) COPPER ALLOY SPRING
MATERIAL
(MATT) GOLD CONTACT
MATERIAL
(MATT) STEEL BUSHING
MATERIAL
(MATT) STEEL BODY
MATERIAL
(MATT) STEEL TERMINAL
MOUNTING BUSHING DIAMETER
(AFYE) 0.248 INCHES MINIMUM AND 0.250 INCHES MAXIMUM
MOUNTING BUSHING LENGTH
(ADAP) 0.375 INCHES NOMINAL
MOUNTING FACILITY TYPE AND QUANTITY
(AXHR) 1 BUSHING
MOUNTING HOLE DIAMETER
(ABTB) 0.115 INCHES NOMINAL
PRECIOUS MATERIAL AND LOCATION
(PMLC) CONTACTS MATERIAL GOLD
PRECIOUS MATERIAL
(PRMT) GOLD
SURFACE TREATMENT
(SFTT) CADMIUM AND CHROMIUM BODY
TERMINAL TYPE
(CSCF) TAB, SOLDER LUG
MATERIAL
(MATL) BRASS SPRING
III PRECIOUS MATERIAL
(PRMT) GOLD
UNABLE TO DECODE
(MATL) UNABLE TO DECODE
III PRECIOUS MATERIAL AND LOCATION
(PMLC) CONTACTS MATERIAL GOLD
BUSHING ACCOMMODATION HOLE SHAPE
(AFRX) ROUND
MATERIAL
(MATL) STEEL TERMINAL
SURFACE TREATMENT
(SURF) CADMIUM AND CHROMIUM BODY
MATERIAL
(MATL) ANY ACCEPTABLE INSULATOR
UNABLE TO DECODE
(AFRX) UNABLE TO DECODEUNABLE TO DECODEUNABLE TO DECODEUNABLE TO DECODEUNABLE TO DECODEUNABLE TO DECODEUNABLE TO DECODEUNABLE TO DECODEUNABLE TO DECODE
MATERIAL
(MATL) STEEL BUSHING
UNABLE TO DECODE
(AFRX) UNABLE TO DECODE

Manufacturer Part Numbers


Related Inventory

ZFD-1589-051227
2530010764313
Condition NS
PROTECTOR
Readily Available
ZFD-1589-0512
2530010764313
Condition NS
PROTECTOR
Readily Available


 
Top