ISO Group Logo
Defense and Aerospace
Supply Chain Partner
A Dynatech International Company


NSN 5935-01-126-8210, 5935011268210
JACK,TELEPHONE

Federal Supply Classification
FSC 5935 - Connectors, Electrical
National Item Identification Number
NIIN 011268210
Codification Country
United States
Item Name Code
INC 00124
Criticality
(X) This item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
Hazardous Material Indicator Code
(P) There is no information in the HMIRS; however, the NSN is in an FSC in Table II of Federal Standard 313 and an MSDS may be required by the user. The requirement for an MSDS is dependent on a hazard determination of the supplier or the intended end use of the product.
Availability: Request Qualified Suppliers: Currently qualifying suppliers

Manufacture or supply this part?
Join our growing community of certified suppliers.

Let Us Know
  CALL ABOUT NSN 5935-01-126-8210
Our client representatives are standing by to help fulfill your request.

+1-321-773-5710

  REQUEST QUOTE for 5935-01-126-8210


Have a list that needs to be quoted? Upload it here.

DLMS® Summary

National Stock Number 5935-01-126-8210

National Stock Number (NSN) 5935-01-126-8210, or NIIN 011268210, (jack,telephone) was assigned February 17, 1982 in the Federal Logistics Information System (FLIS). This NIIN is Available for Manual Assignment. This NSN does not replace any other NSNs.

There are 2 manufacturer part numbers associated with this NSN. None of the associated part number(s) are considered obsolete. The manufacturer part numbers were originally supplied by 2 suppliers. Today, 2 suppliers are listed as Active suppliers for this NSN. Of the active suppliers, only one supplier is deemed design controlled or valid supply parts.

This part number has not been procured by the US Government in over 5 years.

Based on a planned procurement review by the Primary Inventory Control Activity (PICA) on Nov 02, 2005, this NSN's acquisition method was noted as: Acquire directly from the actual manufacturer, whether or not the prime contractor is the actual manufacturer. The annual buy value of this part falls below the screening threshold of $10,000 but it has been screened for known source(s). (NOTE: This code shall not be used when screening parts entering the inventory. It shall not be assigned in preference to or supersede any other AMSC.) Valid AMCs: 1, 2, 3, 4 and 5.

This NSN is assigned to Item Name Code (INC) 00124. [A CONTACT SPRING TYPE ELECTRICAL FITTING OF TWO OR MORE CONDUCTORS, WHICH IS ARRANGED FOR THE INSERTION OF A PLUG,TELEPHONE. ONE CONDUCTOR MAY BE GROUNDED. DOES NOT INCLUDE SEPARABLE TELEPHONE JACKS WHICH ARE TERMED, JACK ASSEM BLY,TELEPHONE. EXCLUDES:JACK,TIP.]. This item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. There is no information in the HMIRS; however, the NSN is in an FSC in Table II of Federal Standard 313 and an MSDS may be required by the user. The requirement for an MSDS is dependent on a hazard determination of the supplier or the intended end use of the product. NSN 5935011268210 contains gold.

This NSN is associated to Schedule B 8517700000: parts for apparatus for transmission or reception of voice, images or other data, including apparatus for communication in a wired or wireless network. The Schedule B End Use is listed as telecommunications equipment. NAICS classification category 334220: radio and television broadcasting and wireless communications equipment manufacturing.

This information was last updated on .


Technical Characteristics

MATERIAL
(MATL) PLASTIC, POLYTETRAFLUOROETHYLENE INSULATOR
UNABLE TO DECODE
(MATL) UNABLE TO DECODE
III PRECIOUS MATERIAL AND LOCATION
(PMLC) SPRING CONTACT SURFACE GOLD
SURFACE TREATMENT
(SURF) NICKEL BODY AND COPPER BODY
MATERIAL
(MATL) BRASS BODY
ELECTRICAL INSULATION FEATURE
(AALV) INSULATED FROM PANEL
ACCOMMODATED FINGER TYPE
(AFXS) TWO CONDUCTOR, SLENDER ROUND TIP SINGLE FINGER
BODY DIAMETER
(ABPM) 0.530 INCHES NOMINAL
BODY STYLE
(AAQL) COAXIAL HOLE OR SLOT MOUNTED
CURRENT RATING IN AMPS
(AMPS) 50.0
FINGER ACCOMMODATION DIAMETER
(AFXY) 0.053 INCHES NOMINAL SINGLE FINGER
FINGER ACCOMMODATION LENGTH
(AFXZ) 0.190 INCHES NOMINAL SINGLE FINGER
FSC APPLICATION DATA
(ZZZV) CONNECTORS,ELECTRICAL
JACK CONTACT ARRANGEMENT DESIGNATOR
(AFZK) J13-1C
OVERALL HEIGHT
(ABKW) 0.810 INCHES NOMINAL
OVERALL LENGTH
(ABHP) 3.250 INCHES NOMINAL
MATERIAL
(MATT) COPPER ALLOY BODY
MATERIAL
(MATT) COPPER ALLOY SPRING
MATERIAL
(MATT) PLASTIC POLYTETRAFLUOROETHYLENE INSULATOR
MOUNTING BUSHING DIAMETER
(AFYE) 0.447 INCHES NOMINAL
MOUNTING BUSHING LENGTH
(ADAP) 0.570 INCHES NOMINAL
MOUNTING FACILITY TYPE AND QUANTITY
(AXHR) 1 UNTHREADED HOLE
MOUNTING HOLE DIAMETER
(ABTB) 0.156 INCHES NOMINAL
PRECIOUS MATERIAL
(PRMT) GOLD
PRECIOUS MATERIAL AND LOCATION
(PMLC) SPRING CONTACT SURFACE GOLD
STORAGE TYPE
(BBRG) GENERAL PURPOSE UNHEATED WAREHOUSE
SURFACE TREATMENT
(SFTT) GOLD AND COPPER SPRING
SURFACE TREATMENT
(SFTT) NICKEL AND COPPER BODY
TERMINAL TYPE
(CSCF) CRIMP
III FSC APPLICATION DATA
(ZZZV) CONNECTORS,ELECTRICAL
MATERIAL
(MATL) BRASS SPRING
SURFACE TREATMENT
(SURF) GOLD SPRING AND COPPER SPRING
III STORAGE TYPE
(BBRG) GENERAL PURPOSE UNHEATED WAREHOUSE
III PRECIOUS MATERIAL
(PRMT) GOLD

Manufacturer Part Numbers


Related Inventory



 
Top