NSN 5935-01-138-1356, 5935011381356
CONNECTOR,RECEPTACLE,ELECTRICAL

Federal Supply Classification: FSC 5935 - Connectors, Electrical
National Item Identification Number: NIIN 011381356
Codification Country: United States
Item Name Code: INC 15093
Criticality: (X) This item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
Hazardous Material Indicator Code: (P) There is no information in the HMIRS; however, the NSN is in an FSC in Table II of Federal Standard 313 and an MSDS may be required by the user. The requirement for an MSDS is dependent on a hazard determination of the supplier or the intended end use of the product.

Availability: Readily Available Qualified Suppliers: We have 6 qualified suppliers

Manufacture or supply this part?
Join our growing community of certified suppliers.

Let Us Know

CALL ABOUT NSN 5935-01-138-1356

Our client representatives are standing by to help fulfill your request.

+1-321-773-5710

REQUEST QUOTE for 5935-01-138-1356

Have a list that needs to be quoted? Upload it here.

Upload a List

DLMS^® Summary

National Stock Number 5935-01-138-1356

National Stock Number (NSN) 5935-01-138-1356, or NIIN 011381356, (connector,receptacle,electrical) was assigned September 8, 1982 in the Federal Logistics Information System (FLIS). This NSN does not replace any other NSNs.

There are no manufacturer part numbers associated to this NSN. ISO Group has several sources of supply for this NSN.

This part number has not been procured by the US Government in over 5 years.

This NSN is unique to one weapons system.

This NSN is assigned to Item Name Code (INC) 15093. [AN ELECTRICAL FITTING WITH ELECTRICAL CONTACTS CONSTRUCTED TO BE AFFIXED TO THE END OF A CABLE, CONDUIT, COAXIAL LINE, CORD, WIRE (INCLUDES PRINTED/ETCHED), PRINTED WIRING BOARD, OR THE LIKE FOR CONVENIENCE IN JOINING WITH ANOTHER ELECTRICAL CONNECTOR OR PRINTED WIRING BOARD. IT IS DESIGNED TO BE MOUNTED ON A BULKHEAD, CHASSIS, PANEL, WALL, PRINTED WIRING BOARD, OR THE LIKE. EXCLUDES:LAMPHOLDER; JACK,TELEPHONE; JACK,TIP; INSERT ELECTRICAL CONNECTOR; INSERT MODULE,ELECTRICAL CONNECTOR; CONNECTOR BODY (AS MODIFIED) AND SOCKET,PLUG-IN ELECTRONIC COMPONENTS. SEE ALSO WIRING HARNESS (AS MODIFIED) AND CABLE ASSEMBLY (AS MODIFIED). FOR ITEMS WITH TERMINATION WIRES OF MORE THAN FOUR INCHES IN LENGTH, SEE LEAD ASSEMBLY,ELECTRICAL. FOR ITEMS WITHOUT INSERTS, SEE SHELL,ELECTRICAL CONNECTOR.]. This item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. There is no information in the HMIRS; however, the NSN is in an FSC in Table II of Federal Standard 313 and an MSDS may be required by the user. The requirement for an MSDS is dependent on a hazard determination of the supplier or the intended end use of the product. NSN 5935011381356 contains gold.

This information was last updated on May 01, 2024.

Technical Characteristics

SHELL TYPE: (AFRT) SOLID
CONTACT MATERIAL: (CQTZ) COPPER ALLOY SINGLE MATING END SINGLE CONTACT GROUPING
UNTHREADED MOUNTING HOLE DIAMETER: (AEBV) 0.115 INCHES MINIMUM AND 0.130 INCHES MAXIMUM
SPECIFICATION/STANDARD DATA: (ZZZK) 96906-MS27508 GOVERNMENT STANDARD
OVERALL WIDTH: (ABMK) 1.047 INCHES MAXIMUM
SHELL SURFACE TREATMENT: (CSWM) CADMIUM AND CHROMATE AND NICKEL
DISTANCE BETWEEN CENTERLINES OF MOUNTING FACILITIES PARALLEL TO BODY WIDTH: (AEHA) 0.812 INCHES NOMINAL
CONTACT SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: (CRBJ) MIL-G-45204 MIL SPEC SINGLE TREATMENT RESPONSE SINGLE MATING END SINGLE CONTACT GROUPING
TEST DATA DOCUMENT: (TEST) 81349-MIL-C-38999 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.).
OVERALL HEIGHT: (ABKW) 1.047 INCHES MAXIMUM
DISTANCE FROM MOUNTING SHOULDER TO FRONT FACE: (AFQK) 0.442 INCHES MINIMUM AND 0.447 INCHES MAXIMUM
OVERALL LENGTH: (ABHP) 0.697 INCHES NOMINAL
MATING END QUANTITY: (AFQW) 1
TERMINAL LOCATION: (CQTM) BACK SINGLE MATING END SINGLE CONTACT GROUPING
INCLUDED CONTACT TYPE: (CXCL) ROUND PIN SINGLE MATING END SINGLE CONTACT GROUPING
PRECIOUS MATERIAL AND LOCATION: (PMLC) CONTACT SURFACES GOLD
CONTACT POSITION ARRANGEMENT STYLE: (AFQX) 12-22 SINGLE MATING END
SHELL MATERIAL: (CSPT) ALUMINUM ALLOY
BODY STYLE: (AAQL) STRAIGHT SHAPE, EXTERNAL COUPLING
III BODY STYLE: (AAQL) STRAIGHT SHAPE, EXTERNAL COUPLING
ENVIRONMENTAL PROTECTION: (ADZC) MOISTURE PROOF AND SALT WATER RESISTANT AND VIBRATION PROOF AND CORROSION RESISTANT AND DUST RESISTANT AND FUEL RESISTANT AND FUNGUS RESISTANT AND HUMIDITY RESISTANT AND OIL RESISTANT AND SHOCK RESISTANT AND THERMAL SHOCK RESISTANT AND VIBRATION RESISTANT
CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO HEIGHT: (AEBW) 0.812 INCHES NOMINAL
CONTACT REMOVABILITY: (AFQZ) REMOVABLE SINGLE MATING END SINGLE CONTACT GROUPING
SHELL SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: (CTBC) QQ-P-416, TY 2 FED SPEC 1ST TREATMENT RESPONSE AND QQ-P-416, TY 2 FED SPEC 2ND TREATMENT RESPONSE
INCLUDED CONTACT QUANTITY: (CXCG) 22 SINGLE MATING END SINGLE CONTACT GROUPING
TERMINAL TYPE: (CSCF) CRIMP SINGLE MATING END SINGLE CONTACT GROUPING
OPERATING TEMP RATING: (AWTN) -65.0 DEG CELSIUS MINIMUM AND 150.0 DEG CELSIUS MAXIMUM
POLARIZATION METHOD: (AFRN) KEYWAY OR MULTIPLE KEYWAY
INSERT POSITION IN DEG: (AFRP) 95.0 AND 132.0 AND 232.0 AND 260.0 AND 340.0
CONTACT SURFACE TREATMENT: (CQYH) GOLD SINGLE MATING END SINGLE CONTACT GROUPING
PRECIOUS MATERIAL: (PRMT) GOLD
CONTACT POSITION ARRANGEMENT STYLE: (AFQX) 40534 SINGLE MATING END
CONNECTOR LOCKING METHOD: (AFRV) BAYONET PIN
PRECIOUS MATERIAL AND WEIGHT: (PMWT) 0.022 GOLD GRAINS, TROY