NSN 5935-01-197-2614, 5935011972614
CONNECTOR,RECEPTACLE,ELECTRICAL

Federal Supply Classification: FSC 5935 - Connectors, Electrical
National Item Identification Number: NIIN 011972614
Codification Country: United States
Item Name Code: INC 15093
Criticality: (X) This item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
Hazardous Material Indicator Code: (P) There is no information in the HMIRS; however, the NSN is in an FSC in Table II of Federal Standard 313 and an MSDS may be required by the user. The requirement for an MSDS is dependent on a hazard determination of the supplier or the intended end use of the product.

Availability: Readily Available Qualified Suppliers: We have 7 qualified suppliers

Manufacture or supply this part?
Join our growing community of certified suppliers.

Let Us Know

CALL ABOUT NSN 5935-01-197-2614

Our client representatives are standing by to help fulfill your request.

+1-321-773-5710

REQUEST QUOTE for 5935-01-197-2614

Have a list that needs to be quoted? Upload it here.

Upload a List

DLMS^® Summary

National Stock Number 5935-01-197-2614

National Stock Number (NSN) 5935-01-197-2614, or NIIN 011972614, (connector,receptacle,electrical) was assigned December 19, 1984 in the Federal Logistics Information System (FLIS). NIIN 011972614 was cancelled on June 2, 2011, with a cancelled status of "Item is Cancelled - USE." This NSN was replaced by NSN 5935002616759. This NSN does not replace any other NSNs.

There are no manufacturer part numbers associated to this NSN. ISO Group has several sources of supply for this NSN.

This part number has not been procured by the US Government in over 5 years.

This NSN is unique to one weapons system.

There has been very little demand for this national stock number. The demand for this NSN originated from less than 5 countries.

This NSN is assigned to Item Name Code (INC) 15093. [AN ELECTRICAL FITTING WITH ELECTRICAL CONTACTS CONSTRUCTED TO BE AFFIXED TO THE END OF A CABLE, CONDUIT, COAXIAL LINE, CORD, WIRE (INCLUDES PRINTED/ETCHED), PRINTED WIRING BOARD, OR THE LIKE FOR CONVENIENCE IN JOINING WITH ANOTHER ELECTRICAL CONNECTOR OR PRINTED WIRING BOARD. IT IS DESIGNED TO BE MOUNTED ON A BULKHEAD, CHASSIS, PANEL, WALL, PRINTED WIRING BOARD, OR THE LIKE. EXCLUDES:LAMPHOLDER; JACK,TELEPHONE; JACK,TIP; INSERT ELECTRICAL CONNECTOR; INSERT MODULE,ELECTRICAL CONNECTOR; CONNECTOR BODY (AS MODIFIED) AND SOCKET,PLUG-IN ELECTRONIC COMPONENTS. SEE ALSO WIRING HARNESS (AS MODIFIED) AND CABLE ASSEMBLY (AS MODIFIED). FOR ITEMS WITH TERMINATION WIRES OF MORE THAN FOUR INCHES IN LENGTH, SEE LEAD ASSEMBLY,ELECTRICAL. FOR ITEMS WITHOUT INSERTS, SEE SHELL,ELECTRICAL CONNECTOR.]. This item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. There is no information in the HMIRS; however, the NSN is in an FSC in Table II of Federal Standard 313 and an MSDS may be required by the user. The requirement for an MSDS is dependent on a hazard determination of the supplier or the intended end use of the product. NSN 5935011972614 contains gold.

This information was last updated on Apr 01, 2024.

Technical Characteristics

DISTANCE BETWEEN CENTERLINES OF MOUNTING FACILITIES PARALLEL TO BODY WIDTH: (AEHA) 1.250 INCHES NOMINAL
CONTACT SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: (CRBJ) MIL-G-45204 MIL SPEC SINGLE TREATMENT RESPONSE SINGLE MATING END SINGLE CONTACT GROUPING
MANUFACTURERS CODE: (SR-1) 96906
NON-DEFINITIVE GOVERNMENT SPEC/STD REFERENCE: (SR-1) MIL-C-38999
THREAD CLASS: (AAJD) 2A
DEFINITIVE GOVERNMENT SPEC/STD REFERENCE: (SR-1) MS27497T22F35PA
TEST DATA DOCUMENT: (TEST) 81349-MIL-C-38999 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.).
THREAD DIRECTION: (AAJF) RIGHT-HAND
SHELL SURFACE TREATMENT: (CSWM) NICKEL
THREADED DEVICE TYPE: (AFQR) BACK SHELL
CONNECTOR LOCKING METHOD: (AFRV) BAYONET PIN
III PRECIOUS MATERIAL AND WEIGHT: (PMWT) 0.100 GOLD GRAINS, TROY
THREAD SERIES DESIGNATOR: (THSD) UNEF
THREAD QUANTITY PER INCH: (CMLP) 18
INCLUDED CONTACT TYPE: (CXCL) ROUND PIN SINGLE MATING END SINGLE CONTACT GROUPING
ENVIRONMENTAL PROTECTION: (ADZC) MOISTURE PROOF AND SALT WATER RESISTANT AND VIBRATION PROOF
CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO HEIGHT: (AEBW) 1.250 INCHES NOMINAL
CONTACT POSITION ARRANGEMENT STYLE: (AFQX) EFAG 22-35 SINGLE MATING END
CONTACT REMOVABILITY: (AFQZ) REMOVABLE SINGLE MATING END SINGLE CONTACT GROUPING
SHELL TYPE: (AFRT) SOLID
TERMINAL TYPE: (CSCF) CRIMP SINGLE MATING END SINGLE CONTACT GROUPING
III PRECIOUS MATERIAL: (PRMT) GOLD
MANUFACTURERS CODE: (SR-1) 81349
OVERALL LENGTH: (ABHP) 0.833 INCHES MINIMUM AND 0.838 INCHES MAXIMUM
OVERALL HEIGHT: (ABKW) 1.578 INCHES MAXIMUM
UNTHREADED MOUNTING HOLE DIAMETER: (AEBV) 0.115 INCHES MINIMUM AND 0.130 INCHES MAXIMUM
SHELL MATERIAL: (CSPT) ALUMINUM ALLOY
SHELL SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: (CTBC) MIL-C-26074 MIL SPEC SINGLE TREATMENT RESPONSE
DISTANCE FROM MOUNTING SHOULDER TO FRONT FACE: (AFQK) 0.442 INCHES MINIMUM AND 0.447 INCHES MAXIMUM
CONTACT MATERIAL: (CQTZ) COPPER ALLOY SINGLE MATING END SINGLE CONTACT GROUPING
SPECIFICATION/STANDARD DATA: (ZZZK) 96906-MS27497 GOVERNMENT STANDARD
POLARIZATION METHOD: (AFRN) KEYWAY OR MULTIPLE KEYWAY
NOMINAL THREAD LENGTH: (AKMG) 0.219 INCHES
BODY STYLE: (AAQL) 3G STRAIGHT SHAPE, EXTERNAL COUPLING
INSERT POSITION IN DEG: (AFRP) 345.0
NOMINAL THREAD SIZE: (CQJX) 1.312 INCHES
CONTACT SURFACE TREATMENT: (CQYH) GOLD SINGLE MATING END SINGLE CONTACT GROUPING
INCLUDED CONTACT QUANTITY: (CXCG) 100 SINGLE MATING END SINGLE CONTACT GROUPING
III PRECIOUS MATERIAL AND LOCATION: (PMLC) CONTACT SURFACES GOLD
OVERALL WIDTH: (ABMK) 1.578 INCHES MAXIMUM
MATING END QUANTITY: (AFQW) 1
TERMINAL LOCATION: (CQTM) BACK SINGLE MATING END SINGLE CONTACT GROUPING