NSN 5935-01-299-3013, 5935012993013
DUMMY CONNECTOR,RECEPTACLE

Federal Supply Classification: FSC 5935 - Connectors, Electrical
National Item Identification Number: NIIN 012993013
Codification Country: United States
Item Name Code: INC 15092
Criticality: (X) This item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
Hazardous Material Indicator Code: (P) There is no information in the HMIRS; however, the NSN is in an FSC in Table II of Federal Standard 313 and an MSDS may be required by the user. The requirement for an MSDS is dependent on a hazard determination of the supplier or the intended end use of the product.

Availability: Readily Available Qualified Suppliers: We have 9 qualified suppliers

Manufacture or supply this part?
Join our growing community of certified suppliers.

Let Us Know

CALL ABOUT NSN 5935-01-299-3013

Our client representatives are standing by to help fulfill your request.

+1-321-773-5710

REQUEST QUOTE for 5935-01-299-3013

Have a list that needs to be quoted? Upload it here.

Upload a List

DLMS^® Summary

National Stock Number 5935-01-299-3013

National Stock Number (NSN) 5935-01-299-3013, or NIIN 012993013, (dummy connector,receptacle) was assigned April 30, 1989 in the Federal Logistics Information System (FLIS). NIIN 012993013 was cancelled on July 2, 2015, with a cancelled status of "Item is Cancelled - USE." This NSN was replaced by NSN 5935013055210. This NSN does not replace any other NSNs.

There are no manufacturer part numbers associated to this NSN. ISO Group has several sources of supply for this NSN.

This part number has not been procured by the US Government in over 5 years.

This NSN is unique to one weapons system.

There has been very little demand for this national stock number. The demand for this NSN originated from less than 5 countries. Based on a planned procurement review by the Primary Inventory Control Activity (PICA) on Nov 01, 2020, this NSN's acquisition method was noted as: Suitable for Competitive Acquisition. (Potential sources shall include dealers/distributors.) Acquisition of this part is controlled by QPL procedures. Valid AMCs: 1 and 2.

This NSN is assigned to Item Name Code (INC) 15092. [AN ITEM SPECIFICALLY DESIGNED TO MATE WITH A PLUG CONNECTOR TO PERFORM ONE OR MORE SPECIAL FUNCTIONS, SUCH AS TO SUPPORT A PLUG CONNECTOR WHEN NOT IN USE, SHORT CONTACTS, OR OPEN OR CLOSE ELECTRICAL CIRCUITS, IN OR ON ANOTHER CONNECTOR. IT DOES NOT HAVE PROVISIONS FOR ATTACHING A WIRE, CABLE, OR CONTACT. IT IS DESIGNED TO MOUNT ON A PANEL, BULKHEAD, WALL, OR CHASSIS. IT DOES NOT INCLUDE CONNECTOR SHELLS WHICH ARE MERELY USED TO POSITION A PLUG CONNECTOR ON A PANEL.]. This item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. There is no information in the HMIRS; however, the NSN is in an FSC in Table II of Federal Standard 313 and an MSDS may be required by the user. The requirement for an MSDS is dependent on a hazard determination of the supplier or the intended end use of the product. NSN 5935012993013 does not contain precious metals.

This information was last updated on Aug 01, 2025.

Technical Characteristics

TEST DATA DOCUMENT: (TEST) 81349-MIL-C-26482 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.).
UNTHREADED MOUNTING HOLE DIAMETER: (AEBV) 0.115 INCHES MINIMUM AND 0.125 INCHES MAXIMUM
MATING END QUANTITY: (AFQW) 1
POLARIZATION METHOD: (AFRN) KEYWAY OR MULTIPLE KEYWAY
SHELL MATERIAL: (CSPT) ALUMINUM ALLOY
SPECIFICATION/STANDARD DATA: (ZZZK) 96906-MS3115 GOVERNMENT STANDARD
OVERALL LENGTH: (ABHP) 0.508 INCHES MINIMUM AND 0.571 INCHES MAXIMUM
DISTANCE BETWEEN CENTERLINES OF MOUNTING FACILITIES PARALLEL TO BODY WIDTH: (AEHA) 0.969 INCHES NOMINAL
CONNECTOR LOCKING METHOD: (AFRV) BAYONET LATCH
OVERALL HEIGHT: (ABKW) 1.234 INCHES MAXIMUM
SHELL TYPE: (AFRT) SOLID
FURNISHED ITEMS (NON-CORE): (ABFF) GASKET
OVERALL WIDTH: (ABMK) 1.234 INCHES MAXIMUM
CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO HEIGHT: (AEBW) 0.969 INCHES NOMINAL
DISTANCE FROM MOUNTING SHOULDER TO FRONT FACE: (AFQK) 0.462 INCHES MINIMUM AND 0.493 INCHES MAXIMUM
ENVIRONMENTAL PROTECTION: (ADZC) MOISTURE PROOF AND SALT WATER RESISTANT AND VIBRATION PROOF AND THERMAL SHOCK RESISTANT AND CORROSION RESISTANT
INSERT POSITION IN DEG: (AFRP) 0.0