ISO Group Logo
Defense and Aerospace
Supply Chain Partner
A Dynatech International Company


NSN 5935-01-353-3655, 5935013533655
JACK,TIP

Federal Supply Classification
FSC 5935 - Connectors, Electrical
National Item Identification Number
NIIN 013533655
Codification Country
United States
Item Name Code
INC 15077
Criticality
(X) This item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
Hazardous Material Indicator Code
(P) There is no information in the HMIRS; however, the NSN is in an FSC in Table II of Federal Standard 313 and an MSDS may be required by the user. The requirement for an MSDS is dependent on a hazard determination of the supplier or the intended end use of the product.
Availability: Readily Available Qualified Suppliers: Currently qualifying suppliers

Manufacture or supply this part?
Join our growing community of certified suppliers.

Let Us Know
  CALL ABOUT NSN 5935-01-353-3655
Our client representatives are standing by to help fulfill your request.

+1-321-773-5710

  REQUEST QUOTE for 5935-01-353-3655


Have a list that needs to be quoted? Upload it here.

DLMS® Summary

National Stock Number 5935-01-353-3655

National Stock Number (NSN) 5935-01-353-3655, or NIIN 013533655, (jack,tip) was assigned February 10, 1992 in the Federal Logistics Information System (FLIS). This NIIN is Available for Manual Assignment. This NSN does not replace any other NSNs.

There are 2 manufacturer part numbers associated with this NSN. One of those part number(s) are considered obsolete. The manufacturer part numbers were originally supplied by 2 suppliers. Today, 2 suppliers are listed as Active suppliers for this NSN. Of the active suppliers, only one supplier is deemed design controlled or valid supply parts.

This part number has not been procured by the US Government in over 5 years.

This NSN is somewhat common among different platforms, belonging to 2 different weapons systems.

Based on a planned procurement review by the Primary Inventory Control Activity (PICA) on Jul 02, 2005, this NSN's acquisition method was noted as: Acquire directly from the actual manufacturer, whether or not the prime contractor is the actual manufacturer. This part requires engineering source approval by the design control activity in order to maintain the quality of the part. An alternate source must qualify in accordance with the design control activity's procedures, as approved by the cognizant Government engineering activity. Valid AMCs: 1, 2, 3, 4 and 5.

This NSN is assigned to Item Name Code (INC) 15077. [AN ELECTRICAL FITTING WITH A FEMALE CONTACT ARRANGED FOR THE INSERTION OF A PLUG, TIP OR A TIP, TEST PROD. IT HAS A SINGLE FACILITY FOR ATTACHMENT OF A CONDUCTOR OR FACILITY FOR CIRCUIT CONNECTION THROUGH ITS MOUNTING PROVISIONS. THE ITEM MAY OR MAY NOT BE INSULATED. EXCLUDES:MULTISECTION TYPES EACH SECTION OF WHICH CONSISTS OF A SINGLE CONTACT SPRING OR TELEPHONE-TYPE JACK. EXCLUDES:CONNECTOR, RECEPTACLE ELECTRICAL; JACK, TELEPHONE; JACK ASSEMBLY, TIP; AND POST, BINDING.]. This item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. There is no information in the HMIRS; however, the NSN is in an FSC in Table II of Federal Standard 313 and an MSDS may be required by the user. The requirement for an MSDS is dependent on a hazard determination of the supplier or the intended end use of the product. NSN 5935013533655 contains gold.

This NSN is associated to Schedule B 8548900100: electrical parts of machinery or apparatus not specified or included elsewhere in chapter 85. The Schedule B End Use is listed as electric apparatus. NAICS classification category 335999: all other miscellaneous electrical equipment and component manufacturing.

This information was last updated on .


Technical Characteristics

MATERIAL
(MATL) BERYLLIUM COPPER SPRING
UNABLE TO DECODE
(SURF) UNABLE TO DECODE
ELECTRICAL INSULATION FEATURE
(AALV) UNINSULATED
ACCOMMODATED FINGER TYPE
(AFXS) BANANA CROSS CUT SINGLE FINGER
BODY LENGTH
(ADAQ) 0.144 INCHES NOMINAL
BODY STYLE
(AAQL) PRESS FIT MOUNTED
FINGER ACCOMMODATION DIAMETER
(AFXY) 0.037 INCHES MINIMUM AND 0.042 INCHES MAXIMUM SINGLE FINGER
OVERALL DIAMETER
(ADAV) 0.102 INCHES MINIMUM AND 0.107 INCHES MAXIMUM
MATERIAL
(MATT) COPPER ALLOY SPRING
MATERIAL
(MATT) COPPER ALLOY BODY
MOUNTING BUSHING DIAMETER
(AFYE) 0.068 INCHES MINIMUM AND 0.071 INCHES MAXIMUM
MOUNTING BUSHING LENGTH
(ADAP) 0.087 INCHES MINIMUM AND 0.101 INCHES MAXIMUM
MOUNTING FACILITY TYPE AND QUANTITY
(AXHR) 1 TERMINAL
PRECIOUS MATERIAL AND LOCATION
(PMLC) CONTACT SURFACES GOLD
PRECIOUS MATERIAL
(PRMT) GOLD
PRECIOUS MATERIAL AND WEIGHT
(PMWT) 0.001 GOLD GRAINS, TROY
SURFACE TREATMENT
(SFTT) GOLD SPRING
SURFACE TREATMENT
(SFTT) TIN AND LEAD OR TIN BODY
TERMINAL TYPE
(CSCF) PRINTED CIRCUIT
MATERIAL
(MATL) COPPER ALLOY BODY
SURFACE TREATMENT
(SURF) GOLD SPRING
III ACCOMMODATED FINGER TYPE
(AFXS) BANANA CROSS CUT SINGLE FINGER
III PRECIOUS MATERIAL AND LOCATION
(PMLC) CONTACT SURFACES GOLD
III PRECIOUS MATERIAL AND WEIGHT
(PMWT) 0.001 GOLD GRAINS, TROY
III PRECIOUS MATERIAL
(PRMT) GOLD
UNABLE TO DECODE
(MATL) UNABLE TO DECODE
SURFACE TREATMENT
(SURF) TIN BODY AND LEAD BODY OR TIN BODY

Manufacturer Part Numbers


Related Inventory

206-076-458-001
Condition FN
TUBE ASSY
Readily Available
777-6458-001
5820001467748
Condition NS
WASHER
Readily Available


 
Top