ISO Group Logo
Defense and Aerospace
Supply Chain Partner
A Dynatech International Company


NSN 5935-01-543-3907, 5935015433907
CONNECTOR,RECEPTACLE,ELECTRICAL

Federal Supply Classification
FSC 5935 - Connectors, Electrical
National Item Identification Number
NIIN 015433907
Codification Country
United States
Item Name Code
INC 15093
Criticality
(S) The item is a non-aviation Critical Safety Item (CSI) whose failure will result in serious damage to equipment or serious injury or death to personnel.
Hazardous Material Indicator Code
(P) There is no information in the HMIRS; however, the NSN is in an FSC in Table II of Federal Standard 313 and an MSDS may be required by the user. The requirement for an MSDS is dependent on a hazard determination of the supplier or the intended end use of the product.
Availability: Request Qualified Suppliers: We have 1 qualified suppliers

Manufacture or supply this part?
Join our growing community of certified suppliers.

Let Us Know
  CALL ABOUT NSN 5935-01-543-3907
Our client representatives are standing by to help fulfill your request.

+1-321-773-5710

  REQUEST QUOTE for 5935-01-543-3907


Have a list that needs to be quoted? Upload it here.

DLMS® Summary

National Stock Number 5935-01-543-3907

National Stock Number (NSN) 5935-01-543-3907, or NIIN 015433907, (connector,receptacle,electrical) was assigned September 12, 2006 in the Federal Logistics Information System (FLIS). NIIN 015433907 was cancelled on December 12, 2019, with a cancelled status of "Item is Cancelled - Inactive." There is no known replacement specified for this stock number. This NSN does not replace any other NSNs.

There is only one manufacturer part number associated with this NSN. None of the associated part number(s) are considered obsolete. The manufacturer part numbers were originally supplied by 2 suppliers. Today, one supplier is listed as an Active supplier for this NSN. Of the active suppliers, there are no suppliers that are deemed design controlled or valid supply parts. ISO Group has several sources of supply for this NSN.

This part number has not been procured by the US Government in over 5 years.

There has been very little demand for this national stock number. The demand for this NSN originated from less than 5 countries. Based on a planned procurement review by the Primary Inventory Control Activity (PICA) on Jun 06, 2020, this NSN's acquisition method was noted as: Acquire directly from the actual manufacturer, whether or not the prime contractor is the actual manufacturer. The design of this part is unstable. Engineering, manufacturing, or performance characteristics indicate that the required design objectives have not been achieved. Major changes are contemplated because the part has a low process yield or has demonstrated marginal performance during tests or service use. These changes will render the present part obsolete and unusable in its present configuration. Limited acquisition from the present source is anticipated pending configuration changes. Valid AMCs: 1, 2, 3, 4 and 5.

This NSN is assigned to Item Name Code (INC) 15093. [AN ELECTRICAL FITTING WITH ELECTRICAL CONTACTS CONSTRUCTED TO BE AFFIXED TO THE END OF A CABLE, CONDUIT, COAXIAL LINE, CORD, WIRE (INCLUDES PRINTED/ETCHED), PRINTED WIRING BOARD, OR THE LIKE FOR CONVENIENCE IN JOINING WITH ANOTHER ELECTRICAL CONNECTOR OR PRINTED WIRING BOARD. IT IS DESIGNED TO BE MOUNTED ON A BULKHEAD, CHASSIS, PANEL, WALL, PRINTED WIRING BOARD, OR THE LIKE. EXCLUDES:LAMPHOLDER; JACK,TELEPHONE; JACK,TIP; INSERT ELECTRICAL CONNECTOR; INSERT MODULE,ELECTRICAL CONNECTOR; CONNECTOR BODY (AS MODIFIED) AND SOCKET,PLUG-IN ELECTRONIC COMPONENTS. SEE ALSO WIRING HARNESS (AS MODIFIED) AND CABLE ASSEMBLY (AS MODIFIED). FOR ITEMS WITH TERMINATION WIRES OF MORE THAN FOUR INCHES IN LENGTH, SEE LEAD ASSEMBLY,ELECTRICAL. FOR ITEMS WITHOUT INSERTS, SEE SHELL,ELECTRICAL CONNECTOR.]. The item is a non-aviation Critical Safety Item (CSI) whose failure will result in serious damage to equipment or serious injury or death to personnel. There is no information in the HMIRS; however, the NSN is in an FSC in Table II of Federal Standard 313 and an MSDS may be required by the user. The requirement for an MSDS is dependent on a hazard determination of the supplier or the intended end use of the product. NSN 5935015433907 does not contain precious metals.

This information was last updated on .


Technical Characteristics

SPECIAL FEATURES
(FEAT) PERFORMANCE BASED LOGISTICS-STOCK AT VENDORS SITE-SUBMIT TO NAVICP VIA DAAS. VERTICAL LATCHING SYSTEM II HEADER, 2.54 MM X 2.54 MM (0.100 INCH X 0.100 INCH) CENTERLINE. DESCRIPTION: A HEADER DESIGNED FOR USE IN LOW POWER APPLICATIONS REQUIRING A PRINTED WIRING BOARD MOUNTED STRAIGHT OR RIGHT ANGLE DISCONNECT. THE HEADER PROVIDES ONLY THE MALE HALF OF THE INTERCONNECTION, USING 0.025 SQUARE FEMALE MINI LATCH HOUSING CONNECTOR TO COMPLETE THE CONNECTION. THE FRICTION LATCH, PROVIDED BY LONG PLASTIC LEDGES, ACT AS LOCKING SYSTEM WITH FEMALE HOUSING TO PREVENT UNMATING, DUE TO VIBRATION IN OPERATION. FEATURES: HOUSING STYLE-WIRE TO BOARD, MOUNTING STYLE-THROUGH HOLE, NUMBER OF ROWS-2, TOTAL NUMBER OF POSITIONS-12, NUMBER OF WALLS-4, HOUSING MATERIAL-HIGH TEMPERATURE PTC, COLOR-BLACK, PIN MATERIAL-PHOSPHOR-BRONZE, CURRENT RATING-3 AMP CONTINUOUS (DEPENDING ON WIRE SIZE), TEMP RANGE-NEG 40 C TO POS 105 C
PART NAME ASSIGNED BY CONTROLLING AGENCY
(CXCY) FRICTION LATCH HEADER DOUBLE ROW VERTICAL
END ITEM IDENTIFICATION
(AGAV) VEHICLE COMM SUBSYSTEM, SDV MK8 MOD1 (NEW BUILD)


Related Inventory



 
Top