ISO Group Logo
Defense and Aerospace
Supply Chain Partner
A Dynatech International Company


NSN 5950-00-027-1805, 5950000271805
COIL,RADIO FREQUENCY

Federal Supply Classification
FSC 5950 - Coils and Transformers
National Item Identification Number
NIIN 000271805
Codification Country
United States
Item Name Code
INC 06338
Criticality
(X) This item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
Hazardous Material Indicator Code
(P) There is no information in the HMIRS; however, the NSN is in an FSC in Table II of Federal Standard 313 and an MSDS may be required by the user. The requirement for an MSDS is dependent on a hazard determination of the supplier or the intended end use of the product.
Availability: Readily Available Qualified Suppliers: Currently qualifying suppliers

Manufacture or supply this part?
Join our growing community of certified suppliers.

Let Us Know
  CALL ABOUT NSN 5950-00-027-1805
Our client representatives are standing by to help fulfill your request.

+1-321-773-5710

  REQUEST QUOTE for 5950-00-027-1805


Have a list that needs to be quoted? Upload it here.

DLMS® Summary

National Stock Number 5950-00-027-1805

National Stock Number (NSN) 5950-00-027-1805, or NIIN 000271805, (coil,radio frequency) was assigned January 1, 1963 in the Federal Logistics Information System (FLIS). This NIIN is Available for Manual Assignment. This NSN does not replace any other NSNs.

There are 3 manufacturer part numbers associated with this NSN. One of those part number(s) are considered obsolete. The manufacturer part numbers were originally supplied by 2 suppliers. Today, one supplier is listed as an Active supplier for this NSN. Of the active suppliers, only one supplier is deemed design controlled or valid supply parts.

This part number has not been procured by the US Government in over 5 years.

This NSN is somewhat common among different platforms, belonging to 7 different weapons systems.

Based on a planned procurement review by the Primary Inventory Control Activity (PICA) on Jun 02, 2006, this NSN's acquisition method was noted as: Acquire directly from the actual manufacturer, whether or not the prime contractor is the actual manufacturer. This part requires engineering source approval by the design control activity in order to maintain the quality of the part. An alternate source must qualify in accordance with the design control activity's procedures, as approved by the cognizant Government engineering activity. Valid AMCs: 1, 2, 3, 4 and 5.

This NSN is assigned to Item Name Code (INC) 06338. [AN ITEM CONSISTING OF A PARTIAL TURN AS ONE OR MORE TURNS OF WIRE OR OTHER CONDUCTIVE MATERIAL WHICH CONSTITUTES ONE CONTINUOUS UNTAPPED WINDING. IT MAY BE WOUND OR FORMED IN OTHER THAN A CIRCULAR MANNER AND MAY BE SELF-SUPPORTING, REQUIRING NO COIL FORM. IT IS SPECIFICALLY DESIGNED TO FURNISH INDUCTIVE REACTANCE IN A CIRCUIT CARRYING RADIO FREQUENCY CURRENT RANGING FROM 20 KILOHERTZ (KILOCYCLES) AND ABOVE. IT MAY INCLUDE TUNING DEVICES, INTEGRAL RESISTORS AND CAPACITORS; HOWEVER, EXCLUDES:FILTER (AS MODIFIED). THE COIL HAS ONLY TWO ELECTRICAL TERMINALS. FOR ITEMS HAVING TAPPED WINDING OR MORE THAN ONE WINDING - SEE TRANSFORMER, RADIO FREQUENCY. FOR COILS WOUND ON RESISTORS, WHICH ARE DESIGNED TO BE INSERTED IN THE CIRCUIT OF A RADIO FREQUENCY STAGE TO SUPPRESS HIGH FREQUENCY PARASITIC OSCILLATIONS, SEE SUPPRESSOR, PARASITIC.]. This item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. There is no information in the HMIRS; however, the NSN is in an FSC in Table II of Federal Standard 313 and an MSDS may be required by the user. The requirement for an MSDS is dependent on a hazard determination of the supplier or the intended end use of the product. NSN 5950000271805 contains an unknown precious metal.

This NSN is associated to Schedule B 8504500000: inductors, nesoi. The Schedule B End Use is listed as generators, accessories. NAICS classification category 334416: capacitor, resistor, coil, transformer, and other inductor manufacturing.

This information was last updated on .


Technical Characteristics

UNABLE TO DECODE
(AAJF) UNABLE TO DECODE
UNABLE TO DECODE
(CRLC) UNABLE TO DECODE
ADJUSTMENT DEVICE DRIVE TYPE
(ACZU) SLOTTED SCREW SINGLE COMPONENT
ADJUSTMENT METHOD AND QUANTITY
(CTHD) 1 ADJUSTABLE CORE SINGLE COMPONENT
BODY LENGTH
(ADAQ) 0.859 INCHES NOMINAL
BODY OUTSIDE DIAMETER
(ADAR) 0.260 INCHES NOMINAL
COIL FORM TYPE
(ACZP) HOLLOW SINGLE COMPONENT
CORE CONSTRUCTION
(ACZR) POWDERED SINGLE COMPONENT
DC RESISTANCE RATING IN OHMS
(CRGS) 13.000 SINGLE COMPONENT SINGLE WINDING
INCLOSURE TYPE
(AKNA) OPEN
INDUCTANCE RATING
(ACYV) 440.00 MICROHENRIES MINIMUM SINGLE COMPONENT SINGLE WINDING AND 800.00 MICROHENRIES MAXIMUM SINGLE COMPONENT SINGLE WINDING
NOMINAL THREAD SIZE
(CQJX) 0.190 INCHES SINGLE GROUP
OVERALL DIAMETER
(ADAV) 0.494 INCHES NOMINAL
OVERALL LENGTH
(ABHP) 1.265 INCHES MAXIMUM
MOUNTING METHOD
(AXGY) THREADED BUSHING SINGLE GROUP
QUALITY FACTOR
(CRHJ) 70 MINIMUM SINGLE COMPONENT SINGLE WINDING
RATING METHOD
(BKPL) ELECTRICAL SINGLE COMPONENT SINGLE WINDING AND WINDING TURNS SINGLE COMPONENT SINGLE WINDING
RELIABILITY INDICATOR
(AARG) NOT ESTABLISHED
THREAD SERIES DESIGNATOR
(THSD) UNF SINGLE GROUP
THREAD QUANTITY PER INCH
(CMLP) 32 SINGLE GROUP
TURN QUANTITY
(ABHY) 247 SINGLE COMPONENT SINGLE WINDING
WINDING CONDUCTOR SIZE
(CQPZ) 0.00198 INCHES AMERICAN WIRE GAGE SINGLE COMPONENT SINGLE WINDING
TERMINAL TYPE AND QUANTITY
(TTQY) 2 TAB, SOLDER LUG

Manufacturer Part Numbers


Related Inventory

206-010-003-001
Condition FN
CONE SET
Readily Available
206-010-003-007
Condition FN
CONE SET
Readily Available
206-010-101-129
Condition FN
YOKE ASSY
Readily Available
206-010-103-007
Condition FN
PAD
Readily Available
206-010-107-001
Condition FN
RETAINER
Readily Available
206-010-108-001
Condition FN
RETAINER
Readily Available
206-010-109-001
Condition FN
RETAINER
Readily Available
206-010-110-003
Condition FN
THRUST WASHER
Readily Available
206-010-110-105
Condition FN
THRUST WASHER
Readily Available
206-010-111-105
Condition FN
ADJUSTING SCREW
Readily Available
206-010-113-005
Condition FN
RING
Readily Available
206-010-118-001
Condition FN
SPACER
Readily Available
206-010-118-003
Condition FN
SPACER
Readily Available
206-010-121-005
Condition FN
LATCH
Readily Available
206-010-122-003
Condition FN
SPRING
Readily Available
206-010-123-003
Condition FN
PIN
Readily Available
206-010-134-001
Condition FN
PLATE
Readily Available
206-010-140-003
Condition FN
WASHER
Readily Available
206-010-147-001
Condition FN
CAP
Readily Available
206-010-148-001
Condition FN
RING
Readily Available
206-010-152-003
Condition FN
BOLT, BLADE
Readily Available
206-010-153-001
Condition FN
WASHER
Readily Available
206-010-154-003
Condition FN
WASHER
Readily Available
206-010-156-001
Condition FN
SHIM
Readily Available
206-010-169-003
Condition FN
BOLT
Readily Available
206-010-179-001
Condition FN
SIGHT GLASS
Readily Available
206-010-189-001
Condition FN
BEARING ROLLER
Readily Available
206-010-191-103
Condition FN
SUPPORT
Readily Available
206-010-195-001
Condition FN
LOCK
Readily Available
206-010-200-137
Condition FN
BLADE MR
Readily Available
206-010-200-145
Condition FN
BLADE MR
Readily Available
206-010-200-149
Condition FN
BLADE MR
Readily Available
206-010-200-151
Condition FN
BLADE MR
Readily Available
206-010-200-153
Condition FN
BLADE MR
Readily Available
206-010-202-001
Condition FN
WEIGHT
Readily Available
206-010-203-109
Condition FN
SUPPORT ASSY
Readily Available
206-010-210-005
Condition FN
TIP CAP
Readily Available
206-010-214-003
Condition FN
WEIGHT
Readily Available
206-010-214-107
Condition FN
WEIGHT
Readily Available
206-010-219-001
Condition FN
TRIM TAB
Readily Available
206-010-219-009
Condition FN
TRIM TAB
Readily Available
206-010-222-005
Condition FN
BUSHING, THERMA
Readily Available
206-010-222-011
Condition FN
BUSHING
Readily Available
206-010-222-013
Condition FN
BUSHING,THERMAL
Readily Available
206-010-222-015
Condition FN
BUSHING,THERMAL
Readily Available
206-010-222-017
Condition FN
BUSHING,THERMAL
Readily Available
206-010-229-011
Condition FN
CORE
Readily Available
206-010-233-003
Condition FN
PAD
Readily Available
206-010-233-005
Condition FN
PAD GRIP
Readily Available
206-010-238-001
Condition FN
WEIGHT
Readily Available
206-010-238-005
Condition FN
WEIGHT
Readily Available
206-010-238-007
Condition FN
WEIGHT
Readily Available
206-010-242-003
Condition FN
PAD ASSY
Readily Available
206-010-245-101
Condition FN
SLEEVE
Readily Available
206-010-311-003
Condition FN
SPACER
Readily Available
206-010-324-001
Condition FN
WASHER
Readily Available
206-010-324-003
Condition FN
WASHER
Readily Available
206-010-332-121
Condition FN
MAST ASSY
Readily Available
20-60-1033-D
Readily Available
20-60-1050
Readily Available
206-0101-070
Readily Available
206-0101-080
Readily Available
206-0101-110
Readily Available
206-0101-120
Readily Available
206-0101-150
Readily Available
206-010-425-003
Condition NE
BUSHING
Readily Available
206-010-421-005
Condition NS
BUSHING
Readily Available
206-010-338-003
Condition NE
BUSHING
Readily Available
206-010-152-3
Condition OH
BOLT BLADE M/R
Readily Available
206-010-335-001
Condition OH
LEVER ASSY
Readily Available
206-010-336-005
Condition OH
LINK ASSY
Readily Available
206-010-408-001
Condition OH
PIN
Readily Available
206-010-464-001
Condition NE
BOLT
Readily Available
206-010-743-013
Condition AR
TUBE ASSY.
Readily Available
206-010-742-003
Condition NS
STATIC STOP
Readily Available
20601-000-00
Condition NS
TERMOSTAT
Readily Available
206-010-191-001
Condition AR
SUPPORT
Readily Available
206-010-335-1AR
Condition AR
LEVER ASSY
Readily Available
206-010-336-001
Condition OH
LINK ASSY
Readily Available
206-010-451-001
Condition OH
RING ASSY/206-0
Readily Available
206-010-710-003
Condition OH
LINK ASSY. T/R
Readily Available
206-010-755-1
Condition NE
SPACER
Readily Available
206-010-733-003
Condition NS
SLEEVE
Readily Available
206-010-765-1
Condition NS
BEARING
Readily Available


 
Top