ISO Group Logo
Defense and Aerospace
Supply Chain Partner
A Dynatech International Company


NSN 5950-00-615-5670, 5950006155670
REACTOR

Federal Supply Classification
FSC 5950 - Coils and Transformers
National Item Identification Number
NIIN 006155670
Codification Country
United States
Item Name Code
INC 00724
Criticality
(X) This item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
Hazardous Material Indicator Code
(P) There is no information in the HMIRS; however, the NSN is in an FSC in Table II of Federal Standard 313 and an MSDS may be required by the user. The requirement for an MSDS is dependent on a hazard determination of the supplier or the intended end use of the product.
Availability: Readily Available Qualified Suppliers: Currently qualifying suppliers

Manufacture or supply this part?
Join our growing community of certified suppliers.

Let Us Know
  CALL ABOUT NSN 5950-00-615-5670
Our client representatives are standing by to help fulfill your request.

+1-321-773-5710

  REQUEST QUOTE for 5950-00-615-5670


Have a list that needs to be quoted? Upload it here.

DLMS® Summary

National Stock Number 5950-00-615-5670

National Stock Number (NSN) 5950-00-615-5670, or NIIN 006155670, (reactor) was assigned January 1, 1963 in the Federal Logistics Information System (FLIS). This NIIN is Available for Manual Assignment. This NSN does not replace any other NSNs.

There are 3 manufacturer part numbers associated with this NSN. 3 of those part number(s) are considered obsolete. The manufacturer part numbers were originally supplied by 5 suppliers. Today, 3 suppliers are listed as Active suppliers for this NSN. Of the active suppliers, only one supplier is deemed design controlled or valid supply parts.

This part number has not been procured by the US Government in over 5 years.

Based on a planned procurement review by the Primary Inventory Control Activity (PICA) on Jun 02, 2006, this NSN's acquisition method was noted as: Acquire directly from the actual manufacturer, whether or not the prime contractor is the actual manufacturer. The annual buy value of this part falls below the screening threshold of $10,000 but it has been screened for known source(s). (NOTE: This code shall not be used when screening parts entering the inventory. It shall not be assigned in preference to or supersede any other AMSC.) Valid AMCs: 1, 2, 3, 4 and 5.

This NSN is assigned to Item Name Code (INC) 00724. [A COIL OR COILS USUALLY CONSTRUCTED WITH CORES HAVING LOW MAGNETIC RELUCTANCE, WHOSE PRIMARY PURPOSE IS TO FURNISH AN INDUCTIVE IMPEDANCE IN POWER OR AUDIO FREQUENCY CIRCUIT RANGING FROM ZERO TO 20 KILOHERTZ (KILOCYCLES). INCLUDES AUDIO FREQUENCY AND POWER FILTER CHOKES, AUDIO REACTORS AND SWINGING CHOKES. DOES NOT INCLUDE TRANSFORMERS OR COILS USED ABOVE AUDIO FREQUENCY RANGE. EXCLUDES:SATURABLE REACTOR. FOR REACTORS WITH AIR CORES, SEE COIL (AS MODIFIED).]. This item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. There is no information in the HMIRS; however, the NSN is in an FSC in Table II of Federal Standard 313 and an MSDS may be required by the user. The requirement for an MSDS is dependent on a hazard determination of the supplier or the intended end use of the product. NSN 5950006155670 contains an unknown precious metal.

This NSN is associated to Schedule B 8504900020: transformer parts. The Schedule B End Use is listed as generators, accessories. NAICS classification category 335311: power, distribution, and specialty transformer manufacturing.

This information was last updated on .


Technical Characteristics

INDUCTANCE RATING
(ACYV) UNABLE TO DECODE
WINDING OPERATING CURRENT
(CRBZ) UNABLE TO DECODE
DC RESISTANCE RATING IN OHMS
(CRGS) UNABLE TO DECODE
NOMINAL THREAD SIZE
(CQJX) UNABLE TO DECODE
CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO WIDTH
(ABKR) UNABLE TO DECODE
THREAD SERIES DESIGNATOR
(THSD) UNC SINGLE GROUP
MOUNTING FACILITY QUANTITY
(AKPV) UNABLE TO DECODE
WINDING QUANTITY
(AKDX) UNABLE TO DECODE
MOUNTING METHOD
(AXGY) THREADED STUD SINGLE GROUP
MOUNTING METHOD
(AXGY) UNABLE TO DECODE
RATING METHOD
(BKPL) UNABLE TO DECODE
CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO LENGTH
(ABKQ) UNABLE TO DECODE
THREAD QUANTITY PER INCH
(CMLP) UNABLE TO DECODE
BODY HEIGHT
(ADAU) 3.750 INCHES NOMINAL
BODY LENGTH
(ADAQ) 3.000 INCHES NOMINAL
BODY WIDTH
(ADAT) 2.875 INCHES NOMINAL
CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO LENGTH
(ABKQ) 2.375 INCHES NOMINAL SINGLE MOUNTING FACILITY SINGLE CENTER GROUP
CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO WIDTH
(ABKR) 2.062 INCHES NOMINAL SINGLE MOUNTING FACILITY SINGLE CENTER GROUP
DC RESISTANCE RATING IN OHMS
(CRGS) 85.000 SINGLE COMPONENT SINGLE WINDING
INCLOSURE TYPE
(AKNA) FULLY INCLOSED
INDUCTANCE RATING
(ACYV) 4.00 HENRY NOMINAL SINGLE COMPONENT SINGLE WINDING
INDUCTANCE TYPE
(ACYF) FIXED
MOUNTING FACILITY QUANTITY
(AKPV) 4 SINGLE GROUP
MOUNTING METHOD
(AXGY) THREADED STUD(S) SINGLE GROUP
NOMINAL THREAD SIZE
(CQJX) 0.164 INCHES SINGLE GROUP
RATING METHOD
(BKPL) ELECTRICAL SINGLE COMPONENT SINGLE WINDING
RELIABILITY INDICATOR
(AARG) NOT ESTABLISHED
TERMINAL TYPE AND QUANTITY
(TTQY) 2 SOLDER STUD
THREAD SERIES DESIGNATOR
(THSD) UNIFIED NATIONAL COARSE (UNC) SINGLE GROUP
THREAD QUANTITY PER INCH
(CMLP) 32 SINGLE GROUP
WINDING OPERATING CURRENT
(CRBZ) 270.0 MILLIAMPERES DC MAXIMUM SINGLE COMPONENT SINGLE WINDING
WINDING QUANTITY
(AKDX) 1 SINGLE COMPONENT
THREAD SERIES DESIGNATOR
(THSD) UNABLE TO DECODE

Manufacturer Part Numbers

184110000

RNCC
5
RNVC
9
T8125

RNCC
5
RNVC
9
184110000

RNCC
3
RNVC
9
Y5679

RNCC
5
RNVC
2
Y5679

RNCC
5
RNVC
9

Related Inventory

G2786905
ALS4T-8125-7.9
Condition NE
Rivet Nut, M8-1
Readily Available
G910851959
TCT-8125-LT
Condition NE
13/16 CARBIDE H
Readily Available
33JF23
ALS4T-8125-3.8
Condition NE
Rivet Nut: M8-1
Readily Available
33JF24
ALS4T-8125-7.9
Condition NE
Rivet Nut: M8-1
Readily Available
33JE50
AKPT8125TAK
Condition NE
Thread Adaption
Readily Available
444P55
ATC9T-8125
Condition NE
Rivet Nut: M8-1
Readily Available
33JF50
AKS4T-8125-3.8
Condition NE
Rivet Nut: M8-1
Readily Available
AHS3T-8125-3.8
AHS3T-8125-3.8
Condition FN
HEX BODY STEEL
Request
AHS3T-8125-3.8B
AHS3T-8125-3.8B
Condition FN
HEX BODY STEEL
Request
AHS3T-8125-7.9
AHS3T-8125-7.9
Condition FN
HEX BODY STEEL
Request
AHS3T-8125-7.9B
AHS3T-8125-7.9B
Condition FN
HEX BODY STEEL
Request
AKS3T-8125-3.8
AKS3T-8125-3.8
Condition FN
LOW-PRO STEEL B
Request
AKS3T-8125-3.8B
AKS3T-8125-3.8B
Condition FN
LOW-PRO STEEL B
Request
AKS3T-8125-7.9
AKS3T-8125-7.9
Condition FN
LOW-PRO STEEL B
Request
AKS3T-8125-7.9B
AKS3T-8125-7.9B
Condition FN
LOW-PRO STEEL B
Request
AKS4T-8125-7.9B
AKS4-8125-7.9B
Condition FN
LOW PROFILE STE
Request
ALS3T-8125-3.8
ALS3T-8125-3.8
Condition FN
LG.FLANGE STL.B
Request
ALS3T-8125-3.8B
ALS3T-8125-3.8B
Condition FN
LG.FLANGE STL.B
Request
ALS3T-8125-7.9
ALS3T-8125-7.9
Condition FN
LG.FLANGE STL.B
Request
ALS3T-8125-7.9B
ALS3T-8125-7.9B
Condition FN
LG.FLANGE STL.B
Request
ARS4T-8125-12.7
ARS4-8125-12.7
Condition FN
THREADED INSERT
Request
ARS4T-8125-7.1
ARS4-8125-7.1
Condition FN
THREADED INSERT
Request
ASS3T-8125-3.8-16
ASS3T-8125-3.8-1
Condition FN
STEEL CAPTIVE T
Request
ASS3T-8125-3.8-22
ASS3T-8125-3.8-2
Condition FN
STEEL CAPTIVE T
Request
ASS3T-8125-3.8-28
ASS3T-8125-3.8-2
Condition FN
STEEL CAPTIVE T
Request
ASS3T-8125-7.9-11.9
ASS3T-8125-7.9-1
Condition FN
STEEL CAPTIVE T
Request
ASS3T-8125-7.9-17.9
ASS3T-8125-7.9-1
Condition FN
STEEL CAPTIVE T
Request
ASS3T-8125-7.9-23.9
ASS3T-8125-7.9-2
Condition FN
STEEL CAPTIVE T
Request
TPART-29ASPT8125
TPART-29ASPT8125
Condition FN
THREAD DRIVE /
Request
TPART-77AKPT8125
TPART-77AKPT8125
Condition FN
NOSE CONE FOR A
Request
TPART-77ASPT8125
TPART-77ASPT8125
Condition FN
NOSE CONE FOR A
Request
TPART-AKPT8125TAK
TPART-AKPT8125TA
Condition FN
THREAD ADAPTION
Request
TPART-ARPT8125-12.7T
TPART-ARPT8125-1
Condition FN
THREAD ADAPTION
Request
TPART-ARPT8125-7.1TA
TPART-ARPT8125-7
Condition FN
THREAD ADAPTION
Request
TPART-ARPT8125127TAK
TPART-ARPT812512
Condition FN
THREAD ADAPTION
Request
TPART-ARPT812571TAK
TPART-ARPT812571
Condition FN
THREAD ADAPTION
Request
TPART-ASPT8125CTA
TPART-ASPT8125CT
Condition FN
THREAD ADAPTION
Request
TPART-NPT8125TAK
TPART-NPT8125TAK
Condition FN
THREAD ADAPTION
Request


 
Top