ISO Group Logo
Defense and Aerospace
Supply Chain Partner
A Dynatech International Company


NSN 5950-00-913-4388, 5950009134388
REACTOR

Federal Supply Classification
FSC 5950 - Coils and Transformers
National Item Identification Number
NIIN 009134388
Codification Country
United States
Item Name Code
INC 00724
Criticality
(X) This item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
Hazardous Material Indicator Code
(P) There is no information in the HMIRS; however, the NSN is in an FSC in Table II of Federal Standard 313 and an MSDS may be required by the user. The requirement for an MSDS is dependent on a hazard determination of the supplier or the intended end use of the product.
Availability: In Stock Qualified Suppliers: Currently qualifying suppliers

Manufacture or supply this part?
Join our growing community of certified suppliers.

Let Us Know
  CALL ABOUT NSN 5950-00-913-4388
Our client representatives are standing by to help fulfill your request.

+1-321-773-5710

  REQUEST QUOTE for 5950-00-913-4388


Have a list that needs to be quoted? Upload it here.

DLMS® Summary

National Stock Number 5950-00-913-4388

National Stock Number (NSN) 5950-00-913-4388, or NIIN 009134388, (reactor) was assigned January 1, 1960 in the Federal Logistics Information System (FLIS). This NIIN is Available for Manual Assignment. This NSN does not replace any other NSNs.

There is only one manufacturer part number associated with this NSN. None of the associated part number(s) are considered obsolete. The manufacturer part numbers were originally supplied by one supplier. Today, one supplier is listed as an Active supplier for this NSN. Of the active suppliers, only one supplier is deemed design controlled or valid supply parts.

This part number has not been procured by the US Government in over 5 years.

This NSN is unique to one weapons system.

Based on a planned procurement review by the Primary Inventory Control Activity (PICA) on Jun 02, 2006, this NSN's acquisition method was noted as: Acquire only from the prime contractor although the engineering data identifies the Commercial and Government Entity Code (CAGE) and part number of a source other than the prime contractor. The annual buy value of this part falls below the screening threshold of $10,000 but it has been screened for known source(s). (NOTE: This code shall not be used when screening parts entering the inventory. It shall not be assigned in preference to or supersede any other AMSC.) Valid AMCs: 1, 2, 3, 4 and 5.

This NSN is assigned to Item Name Code (INC) 00724. [A COIL OR COILS USUALLY CONSTRUCTED WITH CORES HAVING LOW MAGNETIC RELUCTANCE, WHOSE PRIMARY PURPOSE IS TO FURNISH AN INDUCTIVE IMPEDANCE IN POWER OR AUDIO FREQUENCY CIRCUIT RANGING FROM ZERO TO 20 KILOHERTZ (KILOCYCLES). INCLUDES AUDIO FREQUENCY AND POWER FILTER CHOKES, AUDIO REACTORS AND SWINGING CHOKES. DOES NOT INCLUDE TRANSFORMERS OR COILS USED ABOVE AUDIO FREQUENCY RANGE. EXCLUDES:SATURABLE REACTOR. FOR REACTORS WITH AIR CORES, SEE COIL (AS MODIFIED).]. This item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. There is no information in the HMIRS; however, the NSN is in an FSC in Table II of Federal Standard 313 and an MSDS may be required by the user. The requirement for an MSDS is dependent on a hazard determination of the supplier or the intended end use of the product. NSN 5950009134388 does not contain precious metals.

This NSN is associated to Schedule B 8504900020: transformer parts. The Schedule B End Use is listed as generators, accessories. NAICS classification category 335311: power, distribution, and specialty transformer manufacturing.

This information was last updated on .


Technical Characteristics

CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO LENGTH
(ABKQ) UNABLE TO DECODE
WINDING QUANTITY
(AKDX) UNABLE TO DECODE
RATING METHOD
(BKPL) UNABLE TO DECODE
MOUNTING FACILITY QUANTITY
(AKPV) UNABLE TO DECODE
MOUNTING METHOD
(AXGY) UNTHREADED HOLE SINGLE GROUP
BODY HEIGHT
(ADAU) 1.720 INCHES NOMINAL
BODY LENGTH
(ADAQ) 1.300 INCHES NOMINAL
BODY WIDTH
(ADAT) 1.250 INCHES NOMINAL
CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO LENGTH
(ABKQ) 1.250 INCHES NOMINAL SINGLE MOUNTING FACILITY SINGLE CENTER GROUP
CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO WIDTH
(ABKR) 0.750 INCHES NOMINAL SINGLE MOUNTING FACILITY SINGLE CENTER GROUP
DC RESISTANCE RATING IN OHMS
(CRGS) 349.000 SINGLE COMPONENT SINGLE WINDING
INCLOSURE TYPE
(AKNA) PARTIALLY INCLOSED, DOUBLE SHELL
INDUCTANCE TYPE
(ACYF) FIXED
INDUCTANCE RATING
(ACYV) 6.00 HENRY NOMINAL SINGLE COMPONENT SINGLE WINDING
MOUNTING FACILITY QUANTITY
(AKPV) 4 SINGLE GROUP
MOUNTING HOLE DIAMETER
(ABTB) 0.144 INCHES NOMINAL SINGLE GROUP
MOUNTING METHOD
(AXGY) UNTHREADED HOLE(S) SINGLE GROUP
RATING METHOD
(BKPL) ELECTRICAL SINGLE COMPONENT SINGLE WINDING
RELIABILITY INDICATOR
(AARG) NOT ESTABLISHED
TERMINAL TYPE AND QUANTITY
(TTQY) 2 TAB, SOLDER LUG
WINDING OPERATING CURRENT
(CRBZ) 60.0 MILLIAMPERES DC MAXIMUM SINGLE COMPONENT SINGLE WINDING
WINDING QUANTITY
(AKDX) 1 SINGLE COMPONENT
DC RESISTANCE RATING IN OHMS
(CRGS) UNABLE TO DECODE
MOUNTING HOLE DIAMETER
(ABTB) UNABLE TO DECODE
INDUCTANCE RATING
(ACYV) UNABLE TO DECODE
WINDING OPERATING CURRENT
(CRBZ) UNABLE TO DECODE
CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO WIDTH
(ABKR) UNABLE TO DECODE
MOUNTING METHOD
(AXGY) UNABLE TO DECODE

Manufacturer Part Numbers


Related Inventory

0515-700XXSOS12K cer
DPM4838/10CCKIT
Condition NE
PRIMER EPOXY, K
In Stock
107-05-AL-315-C
Condition NE
SPACER, ALUMINU
In Stock
DS-APC1070
DS-APC1070 - Cer
Condition FN
CERTIFIED CLEAN
In Stock
107-03
Readily Available
107-04
Readily Available
107-05
Readily Available
107-06
Readily Available
1070A

Condition NE
Belden 1070A 60
Readily Available
1070

Condition NE
1070 Low-Capaci
Readily Available
107001

Condition NE
Cup, Collapsibl
Readily Available
107069

Condition NE
Toro Clip #1070
Readily Available
10702711

Condition NE
Case Constructi
Readily Available
10701586

Condition NE
JLG Hex Jam Nut
Readily Available
107-0279

Condition NE
Toro Washer #10
Readily Available
10-7070

Condition NE
Toro Square Key
Readily Available
10703211

Condition NE
Case Constructi
Readily Available
107071A1

Condition NE
Case Constructi
Readily Available
1070SZ7

Condition NE
HexArmor Helix
Readily Available
1070SZ10

Condition NE
HexArmor Helix
Readily Available
1070SZ11

Condition NE
HexArmor Helix
Readily Available
1070SZ12

Condition NE
HexArmor Helix
Readily Available
1070SZ9

Condition NE
HexArmor Helix
Readily Available
1070SZ6

Condition NE
HexArmor Helix
Readily Available
1070SZ5

Condition NE
HexArmor Helix
Readily Available
10-703-8-05
Condition NE
Readily Available
10-702-2-01
Condition NE
Readily Available
107011-54
Readily Available
10-702-6-04
Condition NE
Readily Available
107-001
Fuse Holder
Readily Available
107083
Readily Available
107078-01
Readily Available
107-030-01F
Readily Available
107-030-23
Readily Available
107-030-41
Readily Available
107-030-43
Readily Available
107-030-53
Readily Available
107-030-61
Readily Available
107-030-63
Readily Available
107-030-71
Readily Available
107-030-75
Readily Available
107-030-77
Readily Available
107-042
Readily Available
107-044B12
Readily Available
107-059-5DD
Readily Available
107-059-7DD
Readily Available
107001-1
Readily Available
10708
Condition NE
Readily Available
107-002
Fuse Holder
Readily Available
107001
Fuse Holder
Readily Available
1070
Terminal Boards
Readily Available
10-702-6-05
Condition NE
Readily Available
10-70554
Condition NE
Prtct
Readily Available
10-706-6-05
Condition NE
Readily Available
10-70371
Condition NS
BENDIX IMPLUSE
Readily Available
107010
WASHER
Readily Available
10-706-4-01
Condition NE
Readily Available
1-070-101-01
Condition AR
GEAR
Readily Available
1-070-103-01
Condition AR
HOUSING
Readily Available
10-7029
Condition NS
FERRULE
Readily Available
107009-1
Condition FN
Desc: GUIDE; MO
Readily Available
1-070-140-01
Condition AR
GEARSHAFT ASSEM
Readily Available
10705-1
Condition NS
SPIGOT RETAINER
Readily Available
1-070-011-01
Condition AR
ST0P
Readily Available
1-070-064-04
Condition AR
GEARSHAFT
Readily Available
1-070-072-03
Condition AR
SPUR GEAR
Readily Available
1-070-210-01
Condition AR
CARRIER AND CAP
Readily Available
107062
Condition NE
VALVE OUTLINE,
Readily Available
10-706-6-01
Condition NE
Readily Available
10-70616-1
Condition NS
ID PLATE
Readily Available
10700-1
Condition AR
STAB ACTUATOR
Readily Available
1-070-057-01
Condition AR
CAP
Readily Available
1-070-062-01
Condition AR
GEAR
Readily Available
1-070-063-01
Condition AR
GEARSHAFT
Readily Available
107055
COOLER
Readily Available
10706
Condition AR
ANTENNA
Readily Available
107091-83B
Condition FN
REPLACED BY, 10
Readily Available
107094
Condition FN
COVER ASM
Readily Available
107089
Condition FN
NUT
Readily Available
107007
Condition FN
THRUST WASHR
Readily Available
107003
Condition FN
BUSHING-BRK SPD
Readily Available
107.0055
Condition FN
RING
Readily Available
107.0054
Condition FN
RING
Readily Available
10700331
Condition NE
SHAFT (NEW)
Readily Available
10-702-6-01
Condition NE
Readily Available
107063-01
Compass Gyrosco
Request
1070U-4-03
Electric Tachom
Request


 
Top