ISO Group Logo
Defense and Aerospace
Supply Chain Partner
A Dynatech International Company


NSN 5950-01-028-5887, 5950010285887
REACTOR

Federal Supply Classification
FSC 5950 - Coils and Transformers
National Item Identification Number
NIIN 010285887
Codification Country
United States
Item Name Code
INC 00724
Criticality
(X) This item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
Hazardous Material Indicator Code
(P) There is no information in the HMIRS; however, the NSN is in an FSC in Table II of Federal Standard 313 and an MSDS may be required by the user. The requirement for an MSDS is dependent on a hazard determination of the supplier or the intended end use of the product.
Availability: Readily Available Qualified Suppliers: Currently qualifying suppliers

Manufacture or supply this part?
Join our growing community of certified suppliers.

Let Us Know
  CALL ABOUT NSN 5950-01-028-5887
Our client representatives are standing by to help fulfill your request.

+1-321-773-5710

  REQUEST QUOTE for 5950-01-028-5887


Have a list that needs to be quoted? Upload it here.

DLMS® Summary

National Stock Number 5950-01-028-5887

National Stock Number (NSN) 5950-01-028-5887, or NIIN 010285887, (reactor) was assigned October 7, 1976 in the Federal Logistics Information System (FLIS). This NIIN is Available for Manual Assignment. This NSN does not replace any other NSNs.

There are 2 manufacturer part numbers associated with this NSN. One of those part number(s) are considered obsolete. The manufacturer part numbers were originally supplied by one supplier. Today, there are no suppliers listed as an Active supplier for this NSN. Of the active suppliers, there are no suppliers that are deemed design controlled or valid supply parts.

This part number has not been procured by the US Government in over 5 years.

This NSN is unique to one weapons system.

Based on a planned procurement review by the Primary Inventory Control Activity (PICA) on Jun 02, 2006, this NSN's acquisition method was noted as: Acquire only from the prime contractor although the engineering data identifies the Commercial and Government Entity Code (CAGE) and part number of a source other than the prime contractor. The annual buy value of this part falls below the screening threshold of $10,000 but it has been screened for known source(s). (NOTE: This code shall not be used when screening parts entering the inventory. It shall not be assigned in preference to or supersede any other AMSC.) Valid AMCs: 1, 2, 3, 4 and 5.

This NSN is assigned to Item Name Code (INC) 00724. [A COIL OR COILS USUALLY CONSTRUCTED WITH CORES HAVING LOW MAGNETIC RELUCTANCE, WHOSE PRIMARY PURPOSE IS TO FURNISH AN INDUCTIVE IMPEDANCE IN POWER OR AUDIO FREQUENCY CIRCUIT RANGING FROM ZERO TO 20 KILOHERTZ (KILOCYCLES). INCLUDES AUDIO FREQUENCY AND POWER FILTER CHOKES, AUDIO REACTORS AND SWINGING CHOKES. DOES NOT INCLUDE TRANSFORMERS OR COILS USED ABOVE AUDIO FREQUENCY RANGE. EXCLUDES:SATURABLE REACTOR. FOR REACTORS WITH AIR CORES, SEE COIL (AS MODIFIED).]. This item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. There is no information in the HMIRS; however, the NSN is in an FSC in Table II of Federal Standard 313 and an MSDS may be required by the user. The requirement for an MSDS is dependent on a hazard determination of the supplier or the intended end use of the product. NSN 5950010285887 contains an unknown precious metal.

This NSN is associated to Schedule B 8504900020: transformer parts. The Schedule B End Use is listed as generators, accessories. NAICS classification category 335311: power, distribution, and specialty transformer manufacturing.

This information was last updated on .


Technical Characteristics

BODY HEIGHT
(ADAU) 4.000 INCHES MAXIMUM
BODY LENGTH
(ADAQ) 4.625 INCHES MAXIMUM
BODY WIDTH
(ADAT) 3.750 INCHES MAXIMUM
CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO WIDTH
(ABKR) UNABLE TO DECODE
CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO LENGTH
(ABKQ) UNABLE TO DECODE
INDUCTANCE RATING
(ACYV) UNABLE TO DECODE
INDUCTANCE TYPE
(ACYF) FIXED
INCLOSURE TYPE
(AKNA) FULLY INCLOSED
MOUNTING FACILITY QUANTITY
(AKPV) UNABLE TO DECODE
MOUNTING SLOT WIDTH
(ABTD) UNABLE TO DECODE
RATING METHOD
(BKPL) UNABLE TO DECODE
RELIABILITY INDICATOR
(AARG) NOT ESTABLISHED
TERMINAL TYPE AND QUANTITY
(TTQY) 2 TAB, SOLDER LUG
WINDING OPERATING CURRENT
(CRBZ) UNABLE TO DECODE
WINDING QUANTITY
(AKDX) UNABLE TO DECODE
MOUNTING METHOD
(AXGY) FLANGE AND SLOT SINGLE GROUP
WINDING QUANTITY
(AKDX) 1 SINGLE COMPONENT
INDUCTANCE RATING
(ACYV) 20.00 MILLIHENRIES NOMINAL SINGLE COMPONENT SINGLE WINDING
CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO WIDTH
(ABKR) 2.750 INCHES NOMINAL SINGLE MOUNTING FACILITY SINGLE CENTER GROUP
MOUNTING FACILITY QUANTITY
(AKPV) 4 SINGLE GROUP
CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO LENGTH
(ABKQ) 3.750 INCHES NOMINAL SINGLE MOUNTING FACILITY SINGLE CENTER GROUP
RATING METHOD
(BKPL) ELECTRICAL SINGLE COMPONENT SINGLE WINDING
WINDING OPERATING CURRENT
(CRBZ) 2.2 AMPERES DC MAXIMUM SINGLE COMPONENT SINGLE WINDING
MOUNTING SLOT WIDTH
(ABTD) 0.219 INCHES NOMINAL SINGLE GROUP
MOUNTING METHOD
(AXGY) FLANGE SINGLE GROUP AND SLOT SINGLE GROUP

Manufacturer Part Numbers


Related Inventory

P194F103206
5325004953371
Condition NS
FASTENER
Readily Available
9.172-343.0
WN9.172-343.0
Condition NE
Karcher OEM Par
Readily Available
G8511518
SSM20A4F103N
Condition NE
Corner Guard, 2
Readily Available
42FH18
M9484F1031
Condition NE
Proportional Mo
Readily Available
55LL17
SSM20A4F103N
Condition NE
Corner Guard: P
Readily Available
55LL28
VA2004F103N
Condition NE
Corner Guard: P
Readily Available
55LL31
VA2504F103N
Condition NE
Corner Guard: P
Readily Available
55LL03
SM20A4F103N
Condition NE
Corner Guard: P
Readily Available
55LL10
SM20M4F103N
Condition NE
Corner Guard: P
Readily Available
55LL20
SSM25A4F103N
Condition NE
Corner Guard: P
Readily Available
55LL23
SSM20CV4F103N
Condition NE
Corner Guard: P
Readily Available
55LL07
SM20CV4F103N
Condition NE
Corner Guard: P
Readily Available
55LL14
SM20MCV4F103N
Condition NE
Corner Guard: P
Readily Available
P194F1032-06
Readily Available
P104F1032-06
5325007654418
Condition NS
FASTENER
Readily Available
S104F10-3
5365010492775
Condition NS
SLEEVE
Readily Available
S194F1032-18
5305008516409
Condition NS
SCREW
Readily Available
C4F1036-23
Condition FN
SPACER
Readily Available
P104F1032-04
Condition FN
FASTENER
Request
SLP104F1032-04
Condition FN
FASTENER
Request
TYEP104F1032-04
Condition FN
FASTENER
Request


 
Top