ISO Group Logo
Defense and Aerospace
Supply Chain Partner
A Dynatech International Company


NSN 5950-01-071-5239, 5950010715239
REACTOR

Federal Supply Classification
FSC 5950 - Coils and Transformers
National Item Identification Number
NIIN 010715239
Codification Country
United States
Item Name Code
INC 00724
Criticality
(X) This item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
Hazardous Material Indicator Code
(P) There is no information in the HMIRS; however, the NSN is in an FSC in Table II of Federal Standard 313 and an MSDS may be required by the user. The requirement for an MSDS is dependent on a hazard determination of the supplier or the intended end use of the product.
Availability: Readily Available Qualified Suppliers: Currently qualifying suppliers

Manufacture or supply this part?
Join our growing community of certified suppliers.

Let Us Know
  CALL ABOUT NSN 5950-01-071-5239
Our client representatives are standing by to help fulfill your request.

+1-321-773-5710

  REQUEST QUOTE for 5950-01-071-5239


Have a list that needs to be quoted? Upload it here.

DLMS® Summary

National Stock Number 5950-01-071-5239

National Stock Number (NSN) 5950-01-071-5239, or NIIN 010715239, (reactor) was assigned February 9, 1979 in the Federal Logistics Information System (FLIS). This NIIN is Available for Manual Assignment. This NSN does not replace any other NSNs.

There is only one manufacturer part number associated with this NSN. None of the associated part number(s) are considered obsolete. The manufacturer part numbers were originally supplied by one supplier. Today, there are no suppliers listed as an Active supplier for this NSN. Of the active suppliers, there are no suppliers that are deemed design controlled or valid supply parts.

This part number has not been procured by the US Government in over 5 years.

Based on a planned procurement review by the Primary Inventory Control Activity (PICA) on Jun 02, 2006, this NSN's acquisition method was noted as: Acquire only from the prime contractor although the engineering data identifies the Commercial and Government Entity Code (CAGE) and part number of a source other than the prime contractor. The annual buy value of this part falls below the screening threshold of $10,000 but it has been screened for known source(s). (NOTE: This code shall not be used when screening parts entering the inventory. It shall not be assigned in preference to or supersede any other AMSC.) Valid AMCs: 1, 2, 3, 4 and 5.

This NSN is assigned to Item Name Code (INC) 00724. [A COIL OR COILS USUALLY CONSTRUCTED WITH CORES HAVING LOW MAGNETIC RELUCTANCE, WHOSE PRIMARY PURPOSE IS TO FURNISH AN INDUCTIVE IMPEDANCE IN POWER OR AUDIO FREQUENCY CIRCUIT RANGING FROM ZERO TO 20 KILOHERTZ (KILOCYCLES). INCLUDES AUDIO FREQUENCY AND POWER FILTER CHOKES, AUDIO REACTORS AND SWINGING CHOKES. DOES NOT INCLUDE TRANSFORMERS OR COILS USED ABOVE AUDIO FREQUENCY RANGE. EXCLUDES:SATURABLE REACTOR. FOR REACTORS WITH AIR CORES, SEE COIL (AS MODIFIED).]. This item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. There is no information in the HMIRS; however, the NSN is in an FSC in Table II of Federal Standard 313 and an MSDS may be required by the user. The requirement for an MSDS is dependent on a hazard determination of the supplier or the intended end use of the product. NSN 5950010715239 does not contain precious metals.

This NSN is associated to Schedule B 8504900020: transformer parts. The Schedule B End Use is listed as generators, accessories. NAICS classification category 335311: power, distribution, and specialty transformer manufacturing.

This information was last updated on .


Technical Characteristics

BODY HEIGHT
(ADAU) 2.781 INCHES NOMINAL
BODY LENGTH
(ADAQ) 3.000 INCHES NOMINAL
BODY WIDTH
(ADAT) 3.658 INCHES NOMINAL
CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO LENGTH
(ABKQ) 2.500 INCHES NOMINAL SINGLE MOUNTING FACILITY SINGLE CENTER GROUP
CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO WIDTH
(ABKR) 3.000 INCHES NOMINAL SINGLE MOUNTING FACILITY SINGLE CENTER GROUP
INCLOSURE TYPE
(AKNA) FULLY INCLOSED
INDUCTANCE TYPE
(ACYF) FIXED
MAXIMUM OPERATING TEMP
(AEHZ) 130.0 CELSIUS
MOUNTING FACILITY QUANTITY
(AKPV) 4 SINGLE GROUP
MOUNTING METHOD
(AXGY) BRACKET AND SLOT SINGLE GROUP
MOUNTING SLOT WIDTH
(ABTD) 0.169 INCHES NOMINAL SINGLE GROUP
RATING METHOD
(BKPL) WINDING TURNS SINGLE COMPONENT SINGLE WINDING
RELIABILITY INDICATOR
(AARG) NOT ESTABLISHED
WINDING CONDUCTOR SIZE
(CQPZ) 0.09074 INCHES AMERICAN WIRE GAGE SINGLE COMPONENT SINGLE WINDING
WINDING QUANTITY
(AKDX) 1 SINGLE COMPONENT
TERMINAL TYPE AND QUANTITY
(TTQY) 2 TAB, SOLDER LUG
TURN QUANTITY
(ABHY) 27 SINGLE COMPONENT SINGLE WINDING
MAXIMUM OPERATING TEMP
(AEHZ) 130.0 DEG CELSIUS
MOUNTING METHOD
(AXGY) BRACKET SINGLE GROUP AND SLOT SINGLE GROUP

Manufacturer Part Numbers


Related Inventory

AN173H10 REV 6
5306-00-150-9083
Bolt
Readily Available
G5090836
20C813
Condition NE
Pendant Station
Readily Available
G7509083
SZ-7-8MM
Condition NE
Torsion Bit, Me
Readily Available
95090831
95090831
Condition NE
Letter A-Z Blac
Readily Available
95090830
95090830
Condition NE
Letter A-Z Brig
Readily Available
AN173H10
5306001509083
Condition NS
BOLT
Readily Available
83T10
5306001509083
Condition NS
BOLT
Readily Available
509.0835
Condition FN
TAPER ROLLER, B
Readily Available
509.0834
Condition FN
TAPER ROLLER BE
Readily Available
509.0833
Condition FN
TAPER ROLLER, B
Readily Available
509.0831
Condition FN
TAPER ROLLER BE
Readily Available
50908-3
Airspeed Indica
Request


 
Top