ISO Group Logo
Defense and Aerospace
Supply Chain Partner
A Dynatech International Company


NSN 5950-01-172-9889, 5950011729889
REACTOR

Federal Supply Classification
FSC 5950 - Coils and Transformers
National Item Identification Number
NIIN 011729889
Codification Country
United States
Item Name Code
INC 00724
Criticality
(S) The item is a non-aviation Critical Safety Item (CSI) whose failure will result in serious damage to equipment or serious injury or death to personnel.
Hazardous Material Indicator Code
(P) There is no information in the HMIRS; however, the NSN is in an FSC in Table II of Federal Standard 313 and an MSDS may be required by the user. The requirement for an MSDS is dependent on a hazard determination of the supplier or the intended end use of the product.
Availability: Readily Available Qualified Suppliers: Currently qualifying suppliers

Manufacture or supply this part?
Join our growing community of certified suppliers.

Let Us Know
  CALL ABOUT NSN 5950-01-172-9889
Our client representatives are standing by to help fulfill your request.

+1-321-773-5710

  REQUEST QUOTE for 5950-01-172-9889


Have a list that needs to be quoted? Upload it here.

DLMS® Summary

National Stock Number 5950-01-172-9889

National Stock Number (NSN) 5950-01-172-9889, or NIIN 011729889, (reactor) was assigned February 29, 1984 in the Federal Logistics Information System (FLIS). This NIIN is Available for Manual Assignment. This NSN does not replace any other NSNs.

There are 2 manufacturer part numbers associated with this NSN. None of the associated part number(s) are considered obsolete. The manufacturer part numbers were originally supplied by one supplier. Today, one supplier is listed as an Active supplier for this NSN. Of the active suppliers, there are no suppliers that are deemed design controlled or valid supply parts.

This part number has not been procured by the US Government in over 5 years.

This NSN is unique to one weapons system.

Based on a planned procurement review by the Primary Inventory Control Activity (PICA) on Jul 03, 2013, this NSN's acquisition method was noted as: Suitable for Competitive Acquisition. (Potential sources shall include dealers/distributors.) This part requires engineering source approval by the design control activity in order to maintain the quality of the part. An alternate source must qualify in accordance with the design control activity's procedures, as approved by the cognizant Government engineering activity. Valid AMCs: 1, 2, 3, 4 and 5.

This NSN is assigned to Item Name Code (INC) 00724. [A COIL OR COILS USUALLY CONSTRUCTED WITH CORES HAVING LOW MAGNETIC RELUCTANCE, WHOSE PRIMARY PURPOSE IS TO FURNISH AN INDUCTIVE IMPEDANCE IN POWER OR AUDIO FREQUENCY CIRCUIT RANGING FROM ZERO TO 20 KILOHERTZ (KILOCYCLES). INCLUDES AUDIO FREQUENCY AND POWER FILTER CHOKES, AUDIO REACTORS AND SWINGING CHOKES. DOES NOT INCLUDE TRANSFORMERS OR COILS USED ABOVE AUDIO FREQUENCY RANGE. EXCLUDES:SATURABLE REACTOR. FOR REACTORS WITH AIR CORES, SEE COIL (AS MODIFIED).]. The item is a non-aviation Critical Safety Item (CSI) whose failure will result in serious damage to equipment or serious injury or death to personnel. There is no information in the HMIRS; however, the NSN is in an FSC in Table II of Federal Standard 313 and an MSDS may be required by the user. The requirement for an MSDS is dependent on a hazard determination of the supplier or the intended end use of the product. NSN 5950011729889 does not contain precious metals.

This NSN is associated to Schedule B 8504900020: transformer parts. The Schedule B End Use is listed as generators, accessories. NAICS classification category 335311: power, distribution, and specialty transformer manufacturing.

This information was last updated on .


Technical Characteristics

MOUNTING FACILITY QUANTITY
(AKPV) UNABLE TO DECODE
INDUCTANCE RATING
(ACYV) UNABLE TO DECODE
CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO LENGTH
(ABKQ) UNABLE TO DECODE
WINDING QUANTITY
(AKDX) UNABLE TO DECODE
MOUNTING METHOD
(AXGY) UNABLE TO DECODE
RATING METHOD
(BKPL) WINDING TURNS SINGLE COMPONENT SINGLE WINDING AND ELECTRICAL SINGLE COMPONENT SINGLE WINDING
TURN QUANTITY
(ABHY) UNABLE TO DECODE
THREAD SERIES DESIGNATOR
(THSD) UNC SINGLE GROUP
BODY HEIGHT
(ADAU) 1.000 INCHES MAXIMUM
BODY LENGTH
(ADAQ) 3.000 INCHES MAXIMUM
BODY WIDTH
(ADAT) 3.000 INCHES MAXIMUM
CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO LENGTH
(ABKQ) 2.250 INCHES NOMINAL SINGLE MOUNTING FACILITY SINGLE CENTER GROUP
CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO WIDTH
(ABKR) 2.250 INCHES NOMINAL SINGLE MOUNTING FACILITY SINGLE CENTER GROUP
CRITICALITY CODE JUSTIFICATION
(CRTL) FEAT
DC RESISTANCE RATING IN OHMS
(CRGS) 0.034 SINGLE COMPONENT SINGLE WINDING
FREQUENCY RATING
(ACZB) 2.7 KILOHERTZ NOMINAL SINGLE COMPONENT
INCLOSURE TYPE
(AKNA) FULLY INCLOSED
INDUCTANCE RATING
(ACYV) 226.00 MICROHENRIES NOMINAL SINGLE COMPONENT SINGLE WINDING
INDUCTANCE TYPE
(ACYF) FIXED
MOUNTING FACILITY QUANTITY
(AKPV) 4 SINGLE GROUP
MOUNTING METHOD
(AXGY) THREADED HOLE(S) SINGLE GROUP
NOMINAL THREAD SIZE
(CQJX) 0.164 INCHES SINGLE GROUP
RATING METHOD
(BKPL) WINDING TURNS AND ELECTRICAL SINGLE COMPONENT SINGLE WINDING
REFERENCE NUMBER DIFFERENTIATING CHARACTERISTICS
(ZZZY) REFERENCE NUMBER DIFFERENTIATING MATERIAL WILL BE IN ACCORDANCE WITH NAVAL INVENTORY CONTROL POINT ACTIVITY HX QUALITY CONTROL. MANUFACTURING AND TESTING SPECIFICATIONS AVAILABLE AT THE DLA ICP
RELIABILITY INDICATOR
(AARG) NOT ESTABLISHED
SPECIAL FEATURES
(FEAT) ITEM MUST COMPLY WITH REQUIREMENTS OF DEFENSE SUPPLY CENTER COLUMBUS PRODUCTION STARNDARD NO. LO3350
TERMINAL TYPE AND QUANTITY
(TTQY) 4 SOLDER STUD
THREAD SERIES DESIGNATOR
(THSD) UNIFIED NATIONAL COARSE (UNC) SINGLE GROUP
THREAD QUANTITY PER INCH
(CMLP) 32 SINGLE GROUP
TURN QUANTITY
(ABHY) 40 SINGLE COMPONENT SINGLE WINDING
WINDING CONDUCTOR SIZE
(CQPZ) 0.03589 INCHES AMERICAN WIRE GAGE SINGLE COMPONENT SINGLE WINDING
WINDING QUANTITY
(AKDX) 1 SINGLE COMPONENT
FREQUENCY RATING
(ACZB) UNABLE TO DECODE
MOUNTING METHOD
(AXGY) THREADED HOLE SINGLE GROUP
THREAD QUANTITY PER INCH
(CMLP) UNABLE TO DECODE
NOMINAL THREAD SIZE
(CQJX) UNABLE TO DECODE
DC RESISTANCE RATING IN OHMS
(CRGS) UNABLE TO DECODE
THREAD SERIES DESIGNATOR
(THSD) UNABLE TO DECODE
WINDING CONDUCTOR SIZE
(CQPZ) UNABLE TO DECODE
CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO WIDTH
(ABKR) UNABLE TO DECODE

Manufacturer Part Numbers


Related Inventory

NAS1222-06D
INSET, HELICOIL
Readily Available
75-122-206
Condition FN
#22x5/16x3/8" P
Readily Available
D1222-100GM
D1222-06
Condition NE
Deuterium Oxide
Readily Available
G7268871
K0122.2063
Condition NE
Adjustable Hand
Readily Available
60PV12
122206.00
Condition NE
Washdown Motor:
Readily Available
49TT72
141222060
Condition NE
Class X No-Go P
Readily Available
60ZJ39
122206SC
Condition NE
Rotary Shaft Se
Readily Available
60YY51
122206SCV
Condition NE
Rotary Shaft Se
Readily Available
61CK38
122206TCNV
Condition NE
Rotary Shaft Se
Readily Available
61CH11
122206TCN
Condition NE
Rotary Shaft Se
Readily Available
53XA76
122206TC
Condition NE
Rotary Shaft Se
Readily Available
44A275
B122206
Condition NE
Keyless Bushing
Readily Available
53EV85
K0122.2062
Condition NE
Adjustable Hand
Readily Available
3GGX5
K0122.2061
Condition NE
Adjustable Hand
Readily Available
53FH41
K0122.2062X15
Condition NE
Adjustable Hand
Readily Available
53FH42
K0122.2062X20
Condition NE
Adjustable Hand
Readily Available
53FH43
K0122.2062X25
Condition NE
Adjustable Hand
Readily Available
53FH44
K0122.2062X30
Condition NE
Adjustable Hand
Readily Available
53FH45
K0122.2062X35
Condition NE
Adjustable Hand
Readily Available
53FH46
K0122.2062X40
Condition NE
Adjustable Hand
Readily Available
53FH47
K0122.2062X45
Condition NE
Adjustable Hand
Readily Available
53FH48
K0122.2062X50
Condition NE
Adjustable Hand
Readily Available
53FH49
K0122.2062X55
Condition NE
Adjustable Hand
Readily Available
53FH50
K0122.2062X60
Condition NE
Adjustable Hand
Readily Available
53FH30
K0122.2061X60
Condition NE
Adjustable Hand
Readily Available
3DCR9
K0122.2061X55
Condition NE
Adjustable Hand
Readily Available
3DCP2
K0122.2061X15
Condition NE
Adjustable Hand
Readily Available
3DCP4
K0122.2061X20
Condition NE
Adjustable Hand
Readily Available
3DCP6
K0122.2061X25
Condition NE
Adjustable Hand
Readily Available
3DCP8
K0122.2061X30
Condition NE
Adjustable Hand
Readily Available
3DCR1
K0122.2061X35
Condition NE
Adjustable Hand
Readily Available
3DCR3
K0122.2061X40
Condition NE
Adjustable Hand
Readily Available
3DCR5
K0122.2061X45
Condition NE
Adjustable Hand
Readily Available
3DCR7
K0122.2061X50
Condition NE
Adjustable Hand
Readily Available
01222060
MM01222060
Condition NE
Minuteman/Power
Readily Available
MS122206
5340007269499
Condition NS
INSERT
Readily Available
122-206-6
Readily Available
71201-22206-106
Condition FN
ANGLE
Readily Available
71201-22206-108
Condition FN
STRAP
Readily Available
71201-22206-102
Condition FN
STRAP
Readily Available
5310-01-122-2060
011222060.5310
Condition NS
PUSH NUT
Readily Available
71201-22206-104
Condition FN
ANGLE
Readily Available
71201-22206-107
Condition FN
ANGLE
Readily Available
SPE1222-06-10
5307990604157
Condition NS
STUD
Readily Available
70201-22206-105
Condition FN
ANGLE*
Readily Available
441-22206-905
6210012799528
Condition NS
LENS
Readily Available
441-222-06-903
6220012728585
Condition NS
LIGHT
Readily Available
71201-22206-105
Condition FN
ANGLE
Readily Available
03095
MS122206
Condition FN
THREADED INSERT
Request
M8104412-22-06
WM81044/12-22-0/
Condition NE

Request
M8104412-22-06
WM81044/12-22-06
Condition NE

Request
M2305312-220-64FTLEN
WMHS23053/12-220
Condition NE

Request


 
Top