ISO Group Logo
Defense and Aerospace
Supply Chain Partner
A Dynatech International Company


NSN 5960-00-127-9319, 5960001279319
RETAINER,ELECTRON TUBE

Federal Supply Classification
FSC 5960 - Electron Tubes and Associated Hardware
National Item Identification Number
NIIN 001279319
Codification Country
United States
Item Name Code
INC 16182
Criticality
(X) This item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
Hazardous Material Indicator Code
(P) There is no information in the HMIRS; however, the NSN is in an FSC in Table II of Federal Standard 313 and an MSDS may be required by the user. The requirement for an MSDS is dependent on a hazard determination of the supplier or the intended end use of the product.
Availability: Readily Available Qualified Suppliers: Currently qualifying suppliers

Manufacture or supply this part?
Join our growing community of certified suppliers.

Let Us Know
  CALL ABOUT NSN 5960-00-127-9319
Our client representatives are standing by to help fulfill your request.

+1-321-773-5710

  REQUEST QUOTE for 5960-00-127-9319


Have a list that needs to be quoted? Upload it here.

DLMS® Summary

National Stock Number 5960-00-127-9319

National Stock Number (NSN) 5960-00-127-9319, or NIIN 001279319, (retainer,electron tube) was assigned November 27, 1968 in the Federal Logistics Information System (FLIS). This NIIN is Available for Manual Assignment. This NSN does not replace any other NSNs.

There are 2 manufacturer part numbers associated with this NSN. None of the associated part number(s) are considered obsolete. The manufacturer part numbers were originally supplied by one supplier. Today, one supplier is listed as an Active supplier for this NSN. Of the active suppliers, only one supplier is deemed design controlled or valid supply parts.

This part number has not been procured by the US Government in over 5 years.

There has been very little demand for this national stock number. The demand for this NSN originated from less than 5 countries. Based on a planned procurement review by the Primary Inventory Control Activity (PICA) on Jun 02, 2006, this NSN's acquisition method was noted as: Acquire directly from the actual manufacturer, whether or not the prime contractor is the actual manufacturer. The annual buy value of this part falls below the screening threshold of $10,000 but it has been screened for known source(s). (NOTE: This code shall not be used when screening parts entering the inventory. It shall not be assigned in preference to or supersede any other AMSC.) Valid AMCs: 1, 2, 3, 4 and 5.

This NSN is assigned to Item Name Code (INC) 16182. [AN ITEM SPECIFICALLY DESIGNED TO RESTRAIN THE MOVEMENT OF AN ELECTRON TUBE WHEN THE LATTER IS MOUNTED IN ANOTHER ITEM, NORMALLY A TUBE SOCKET. INCLUDES CLAMPS, CLIPS, AND SIMILAR RESTRAINING DEVICES SPECIFICALLY DESIGNED FOR THIS FUNCTION.]. This item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. There is no information in the HMIRS; however, the NSN is in an FSC in Table II of Federal Standard 313 and an MSDS may be required by the user. The requirement for an MSDS is dependent on a hazard determination of the supplier or the intended end use of the product. NSN 5960001279319 contains an unknown precious metal.

This NSN is associated to Schedule B 8540990000: thermionic, cold cathode or photocathode tube parts, nesoi. The Schedule B End Use is listed as telecommunications equipment.

This information was last updated on .


Technical Characteristics

III MATERIAL
(MATT) STEEL
DISTANCE FROM RETAINER CENTER TO END OF EXTENDED CLIP
(AGTC) 2.125 INCHES MAXIMUM
DISTANCE FROM RETAINER CENTER TO CENTERLINE OF MOUNTING FACILITY
(AGTB) 1.062 INCHES NOMINAL
ACCOMMODATED ITEM SECURING DEVICE TYPE
(AGTM) CLAMP
ANGLE BETWEEN ADJACENT MOUNTING FACILITIES IN DEG
(AGTF) 90.0
ANGLE BETWEEN MOUNTING FACILITY AND LOOP HINGE CENTERLINES IN DEG
(AGTE) 15.0
BOLT CIRCLE DIAMETER
(ABKG) 2.125 INCHES NOMINAL SINGLE MOUNTING FACILITY SINGLE CENTER GROUP
INSIDE DIAMETER
(AARX) 2.510 INCHES NOMINAL
OVERALL HEIGHT
(ABKW) 4.000 INCHES NOMINAL
MATERIAL DOCUMENT AND CLASSIFICATION
(MDCL) QQ-S-766,CL 302,CD A FED SPEC SINGLE MATERIAL RESPONSE
MATERIAL
(MATT) STEEL
MOUNTING FACILITY TYPE AND QUANTITY
(AXHR) 4 SLOT SINGLE MOUNTING FACILITY
MOUNTING SLOT LENGTH
(ABVG) 0.313 INCHES NOMINAL SINGLE MOUNTING FACILITY
MOUNTING SLOT WIDTH
(ABTD) 0.175 INCHES NOMINAL SINGLE MOUNTING FACILITY
SPECIAL FEATURES
(FEAT) 1 INSULATING CUSHION; BRACKETS ARE REVERSED
STYLE DESIGNATOR
(STYL) DOUBLE FOOT, CLIP LOCKED TENSION CLAMP
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION
(STDC) MIL-STD-171 MIL STD SINGLE TREATMENT RESPONSE
SURFACE TREATMENT
(SFTT) PASSIVATE

Manufacturer Part Numbers


Related Inventory

S-13361

Condition NE
7 x 7 x 5" Whit
Readily Available
S1336-500GM
S1336-10
Condition NE
Sodium Polyphos
Readily Available
S1336-2.5KG
S1336-13
Condition NE
Sodium Polyphos
Readily Available
S1336-12KG
S1336-18
Condition NE
Sodium Polyphos
Readily Available
S1336-45KGBL
S1336-1D008
Condition NE
Sodium Polyphos
Readily Available
1765AS1336-1
Readily Available


 
Top