ISO Group Logo
Defense and Aerospace
Supply Chain Partner
A Dynatech International Company


NSN 5970-00-504-4146, 5970005044146
INSULATION SLEEVING,ELECTRICAL,S

Federal Supply Classification
FSC 5970 - Electrical Insulators and Insulating Materials
National Item Identification Number
NIIN 005044146
Codification Country
United States
Item Name Code
INC 61626
Criticality
(X) This item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
Hazardous Material Indicator Code
(P) There is no information in the HMIRS; however, the NSN is in an FSC in Table II of Federal Standard 313 and an MSDS may be required by the user. The requirement for an MSDS is dependent on a hazard determination of the supplier or the intended end use of the product.
Availability: Readily Available Qualified Suppliers: Currently qualifying suppliers

Manufacture or supply this part?
Join our growing community of certified suppliers.

Let Us Know
  CALL ABOUT NSN 5970-00-504-4146
Our client representatives are standing by to help fulfill your request.

+1-321-773-5710

  REQUEST QUOTE for 5970-00-504-4146


Have a list that needs to be quoted? Upload it here.

DLMS® Summary

National Stock Number 5970-00-504-4146

National Stock Number (NSN) 5970-00-504-4146, or NIIN 005044146, (insulation sleeving,electrical,s) was assigned July 17, 1974 in the Federal Logistics Information System (FLIS). This NIIN is Available for Manual Assignment. This NSN does not replace any other NSNs.

There is only one manufacturer part number associated with this NSN. None of the associated part number(s) are considered obsolete. The manufacturer part numbers were originally supplied by one supplier. Today, one supplier is listed as an Active supplier for this NSN. Of the active suppliers, only one supplier is deemed design controlled or valid supply parts.

This part number has not been procured by the US Government in over 5 years.

This NSN is somewhat common among different platforms, belonging to 3 different weapons systems.

Based on a planned procurement review by the Primary Inventory Control Activity (PICA) on Apr 26, 2008, this NSN's acquisition method was noted as: Acquire directly from the actual manufacturer, whether or not the prime contractor is the actual manufacturer. The annual buy value of this part falls below the screening threshold of $10,000 but it has been screened for known source(s). (NOTE: This code shall not be used when screening parts entering the inventory. It shall not be assigned in preference to or supersede any other AMSC.) Valid AMCs: 1, 2, 3, 4 and 5.

This NSN is assigned to Item Name Code (INC) 61626. [A RIGID OR FLEXIBLE TUBING HAVING OTHER THAN UNIFORM FABRICATED SHAPES OR FORMS. IT IS SPECIFICALLY DESIGNED TO PREVENT ANY UNDESIRABLE FLOW OF CURRENT BETWEEN CONDUCTORS OR BETWEEN CONDUCTORS AND OTHER OBJECTS. INCLUDES SHRINKABLE TYPE ITEMS. EXCLUDES:ITEMS NOT HAVING RATED ELECTRICAL CHARACTERISTICS. ALSO EXCLUDES:BUSHING, SLEEVE; CABLE NIPPLE, ELECTRICAL; AND INSULATION SLEEVING, ELECTRICAL.]. This item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. There is no information in the HMIRS; however, the NSN is in an FSC in Table II of Federal Standard 313 and an MSDS may be required by the user. The requirement for an MSDS is dependent on a hazard determination of the supplier or the intended end use of the product. NSN 5970005044146 does not contain precious metals.

This NSN is associated to Schedule B 8546900000: electrical insulators, nesoi. The Schedule B End Use is listed as electric apparatus. NAICS classification category 326199: all other plastics product manufacturing.

This information was last updated on .


Technical Characteristics

FIRST BRANCH WALL THICKNESS
(AGAC) 0.120 INCHES MAXIMUM AFTER UNRESTRICTED RECOVERY
ANGLE BETWEEN MAIN BODY AND SECOND BRANCH CENTERLINES IN DEG
(AGAR) 11.0 MAXIMUM AS SUPPLIED
MAIN BODY WALL THICKNESS
(AGAB) UNABLE TO DECODE
ANGLE BETWEEN MAIN BODY AND SECOND BRANCH CENTERLINES IN DEG
(AGAR) 21.4 MINIMUM AFTER UNRESTRICTED RECOVERY
DISTANCE FROM INTERSECTING CENTERLINE OF MAIN BODY TO END OF FIRST BRANCH
(AGAA) 3.542 INCHES MAXIMUM AFTER UNRESTRICTED RECOVERY
DISTANCE FROM INTERSECTING CENTERLINE OF MAIN BODY TO END OF FIRST BRANCH
(AGAA) UNABLE TO DECODE
MAIN BODY WALL THICKNESS
(AGAB) 0.144 INCHES MAXIMUM AFTER UNRESTRICTED RECOVERY
SECOND BRANCH WALL THICKNESS
(AGAD) 0.126 INCHES MAXIMUM AFTER UNRESTRICTED RECOVERY
DISTANCE FROM EDGE OF MAIN BODY TO INTERSECTING CENTERLINES
(AGAG) UNABLE TO DECODE
ANGLE BETWEEN MAIN BODY AND SECOND BRANCH CENTERLINES IN DEG
(AGAR) 9.0 MINIMUM AS SUPPLIED
MATERIAL
(MATT) PLASTIC, POLYOLEFIN, RT-301, RAYCHEM CORP
MATERIAL
(MATT) PLASTIC POLYOLEFIN
MATERIAL
(MATL) PLASTIC, POLYOLEFIN, RT-301, RAYCHEM CORP
FIRST BRANCH WALL THICKNESS
(AGAC) UNABLE TO DECODE
ANGLE BETWEEN MAIN BODY AND SECOND BRANCH CENTERLINES IN DEG
(AGAR) UNABLE TO DECODE
DISTANCE FROM EDGE OF MAIN BODY TO INTERSECTING CENTERLINES
(AGAG) 2.838 INCHES MAXIMUM AFTER UNRESTRICTED RECOVERY
ANGLE BETWEEN MAIN BODY AND SECOND BRANCH CENTERLINES IN DEG
(AGAR) 23.6 MAXIMUM AFTER UNRESTRICTED RECOVERY
SECOND BRANCH WALL THICKNESS
(AGAD) UNABLE TO DECODE
ANGLE BETWEEN MAIN BODY AND SECOND BRANCH CENTERLINES IN DEG
(AGAR) 21.4 MINIMUM AND 23.6 MAXIMUM AFTER UNRESTRICTED RECOVERY
ANGLE BETWEEN MAIN BODY AND SECOND BRANCH CENTERLINES IN DEG
(AGAR) 9.0 MINIMUM AND 11.0 MAXIMUM AS SUPPLIED
COLOR
(HUES) BLACK
DISTANCE FROM EDGE OF MAIN BODY TO INTERSECTING CENTERLINES
(AGAG) 2.322 INCHES MINIMUM AND 2.838 INCHES MAXIMUM AFTER UNRESTRICTED RECOVERY
DISTANCE FROM INTERSECTING CENTERLINE OF MAIN BODY TO END OF FIRST BRANCH
(AGAA) 2.989 INCHES MINIMUM AND 3.542 INCHES MAXIMUM AFTER UNRESTRICTED RECOVERY
FIRST BRANCH INSIDE DIAMETER
(AFZV) 0.490 INCHES MAXIMUM AFTER UNRESTRICTED RECOVERY
FIRST BRANCH INSIDE DIAMETER
(AFZV) 1.060 INCHES MINIMUM AS SUPPLIED
FIRST BRANCH WALL THICKNESS
(AGAC) 0.080 INCHES MINIMUM AND 0.120 INCHES MAXIMUM AFTER UNRESTRICTED RECOVERY
FLEXIBILITY
(FLEX) FLEXIBLE
MAIN BODY WALL THICKNESS
(AGAB) 0.096 INCHES MINIMUM AND 0.144 INCHES MAXIMUM AFTER UNRESTRICTED RECOVERY
MAIN BODY INSIDE DIAMETER
(AFZU) 0.710 INCHES MAXIMUM AFTER UNRESTRICTED RECOVERY
MAIN BODY INSIDE DIAMETER
(AFZU) 1.520 INCHES MINIMUM AS SUPPLIED
MATERIAL DOCUMENT AND CLASSIFICATION
(MDCL) RT-301, RAYCHEM CORP MFR REF SINGLE MATERIAL RESPONSE LOCATION NOT OTHERWISE SPECIFIED
MATERIAL
(MATT) PLASTIC POLYOLEFIN LOCATION NOT OTHERWISE SPECIFIED
RELIABILITY INDICATOR
(AARG) NOT ESTABLISHED
SECOND BRANCH INSIDE DIAMETER
(AFZW) 0.490 INCHES MAXIMUM AFTER UNRESTRICTED RECOVERY
SECOND BRANCH INSIDE DIAMETER
(AFZW) 1.060 INCHES MINIMUM AS SUPPLIED
SECOND BRANCH WALL THICKNESS
(AGAD) 0.080 INCHES MINIMUM AND 0.120 INCHES MAXIMUM AFTER UNRESTRICTED RECOVERY
SPECIAL FEATURES
(FEAT) INCLUDES MOLDING PORTS
STYLE DESIGNATOR
(STYL) TRANSITION-Y

Manufacturer Part Numbers


Related Inventory

382A034-3-00-0
Condition FN
Desc: BOOT; MOQ
Readily Available
382A034-3-00
382A034-3-00-0
Condition FN
Desc: BOOT; MOQ
Readily Available


 
Top