ISO Group Logo
Defense and Aerospace
Supply Chain Partner
A Dynatech International Company


NSN 5970-00-927-3853, 5970009273853
INSULATOR,PLATE

Federal Supply Classification
FSC 5970 - Electrical Insulators and Insulating Materials
National Item Identification Number
NIIN 009273853
Codification Country
United States
Item Name Code
INC 18296
Criticality
(X) This item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
Hazardous Material Indicator Code
(P) There is no information in the HMIRS; however, the NSN is in an FSC in Table II of Federal Standard 313 and an MSDS may be required by the user. The requirement for an MSDS is dependent on a hazard determination of the supplier or the intended end use of the product.
Availability: Request Qualified Suppliers: Currently qualifying suppliers

Manufacture or supply this part?
Join our growing community of certified suppliers.

Let Us Know
  CALL ABOUT NSN 5970-00-927-3853
Our client representatives are standing by to help fulfill your request.

+1-321-773-5710

  REQUEST QUOTE for 5970-00-927-3853


Have a list that needs to be quoted? Upload it here.

DLMS® Summary

National Stock Number 5970-00-927-3853

National Stock Number (NSN) 5970-00-927-3853, or NIIN 009273853, (insulator,plate) was assigned May 13, 1972 in the Federal Logistics Information System (FLIS). This NIIN is Available for Manual Assignment. This NSN does not replace any other NSNs.

There is only one manufacturer part number associated with this NSN. One of those part number(s) are considered obsolete. The manufacturer part numbers were originally supplied by 2 suppliers. Today, one supplier is listed as an Active supplier for this NSN. Of the active suppliers, only one supplier is deemed design controlled or valid supply parts.

This part number has not been procured by the US Government in over 5 years.

Based on a planned procurement review by the Primary Inventory Control Activity (PICA) on Aug 02, 2004, this NSN's acquisition method was noted as: Acquire directly from the actual manufacturer, whether or not the prime contractor is the actual manufacturer. The annual buy value of this part falls below the screening threshold of $10,000 but it has been screened for known source(s). (NOTE: This code shall not be used when screening parts entering the inventory. It shall not be assigned in preference to or supersede any other AMSC.) Valid AMCs: 1, 2, 3, 4 and 5.

This NSN is assigned to Item Name Code (INC) 18296. [AN INSULATOR HAVING FLAT SURFACES, WITH OR WITHOUT HOLES, WHOSE THICKNESS DOES NOT EXCEED 25 PERCENT OF ITS LENGTH OR WIDTH, WHICHEVER IS SMALLER, AND WHOSE SHAPE IS OTHER THAN ROUND. EXCLUDES:INSULATOR (1), SPACER; INSULATOR (1), WASHER; MOUNTING PAD, ELECTRICAL-ELECTRONIC COMPONENT; PLATE, ELECTRICAL SHIELD; AND TERMINAL BOARD.]. This item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. There is no information in the HMIRS; however, the NSN is in an FSC in Table II of Federal Standard 313 and an MSDS may be required by the user. The requirement for an MSDS is dependent on a hazard determination of the supplier or the intended end use of the product. NSN 5970009273853 does not contain precious metals.

This NSN is associated to Schedule B 8546900000: electrical insulators, nesoi. The Schedule B End Use is listed as electric apparatus. NAICS classification category 326199: all other plastics product manufacturing.

This information was last updated on .


Technical Characteristics

FIFTH HOLE SPACING
(CRYN) 0.205 INCHES MINIMUM AND 0.225 INCHES MAXIMUM
FIRST END RADIUS
(CQBH) 0.199 INCHES MINIMUM AND 0.219 INCHES MAXIMUM
FIRST HOLE SPACING
(CQSH) 0.204 INCHES NOMINAL
FIRST HOLE DIAMETER
(ABRC) 0.157 INCHES MINIMUM AND 0.177 INCHES MAXIMUM
FIRST SIDE RADIUS
(CRWK) 0.536 INCHES MINIMUM AND 0.556 INCHES MAXIMUM
FOURTH HOLE SPACING
(CQDL) 0.420 INCHES MINIMUM AND 0.440 INCHES MAXIMUM
IDENTIFICATION CODE COLOR
(AAPC) CLEAR
OVERALL HEIGHT
(ABKW) 0.215 INCHES MINIMUM AND 0.255 INCHES MAXIMUM
OVERALL LENGTH
(ABHP) 1.605 INCHES NOMINAL
OVERALL WIDTH
(ABMK) 1.092 INCHES NOMINAL
SECOND HOLE SPACING
(CRKY) 0.522 INCHES NOMINAL
SECOND HOLE DIAMETER
(ABRD) 0.045 INCHES MINIMUM AND 0.055 INCHES MAXIMUM
STYLE DESIGNATOR
(STYL) FLAT, DIAMOND
SPECIAL FEATURES
(FEAT) TENSILE YS 8,000-9,000 PSI; SHEAR YS 5,400 PSI; AMBIENT TEMP RANGE M 65 DEG C TO P 125 DEG C; DIEL STR 2,560 V/MIL; THERMAL CONDUCTIVITY: 4.6 X 10 M 4 CAL/SEC/CM 2/DEG C/CM
THIRD HOLE SPACING
(CRTB) 1.177 INCHES MINIMUM AND 1.197 INCHES MAXIMUM
UNABLE TO DECODE
(MTLC) UNABLE TO DECODE
MATERIAL AND LOCATION
(MTLC) OVERALL PLASTIC, POLYCARBONATE, L-P-393

Manufacturer Part Numbers


Related Inventory



 
Top