ISO Group Logo
Defense and Aerospace
Supply Chain Partner
A Dynatech International Company


NSN 5970-01-069-7557, 5970010697557
INSULATOR,STANDOFF

Federal Supply Classification
FSC 5970 - Electrical Insulators and Insulating Materials
National Item Identification Number
NIIN 010697557
Codification Country
United States
Item Name Code
INC 00225
Criticality
(X) This item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
Hazardous Material Indicator Code
(P) There is no information in the HMIRS; however, the NSN is in an FSC in Table II of Federal Standard 313 and an MSDS may be required by the user. The requirement for an MSDS is dependent on a hazard determination of the supplier or the intended end use of the product.
Availability: Request Qualified Suppliers: Currently qualifying suppliers

Manufacture or supply this part?
Join our growing community of certified suppliers.

Let Us Know
  CALL ABOUT NSN 5970-01-069-7557
Our client representatives are standing by to help fulfill your request.

+1-321-773-5710

  REQUEST QUOTE for 5970-01-069-7557


Have a list that needs to be quoted? Upload it here.

DLMS® Summary

National Stock Number 5970-01-069-7557

National Stock Number (NSN) 5970-01-069-7557, or NIIN 010697557, (insulator,standoff) was assigned December 23, 1978 in the Federal Logistics Information System (FLIS). This NIIN is Available for Manual Assignment. This NSN does not replace any other NSNs.

There is only one manufacturer part number associated with this NSN. None of the associated part number(s) are considered obsolete. The manufacturer part numbers were originally supplied by 2 suppliers. Today, 2 suppliers are listed as Active suppliers for this NSN. Of the active suppliers, only one supplier is deemed design controlled or valid supply parts.

This part number has not been procured by the US Government in over 5 years.

This NSN is somewhat common among different platforms, belonging to 2 different weapons systems.

Based on a planned procurement review by the Primary Inventory Control Activity (PICA) on Aug 02, 2004, this NSN's acquisition method was noted as: Acquire directly from the actual manufacturer, whether or not the prime contractor is the actual manufacturer. The Government physically does not have in its possession sufficient, accurate, or legible data to purchase this part from other than current source(s). (NOTE: This code is applicable only to parts under immediate buy requirements and only as long as the deficiency is under review for resolution and appropriate recoding.) Valid AMCs: 1, 2, 3, 4 and 5.

This NSN is assigned to Item Name Code (INC) 00225. [AN INSULATOR WHICH IS SPECIFICALLY DESIGNED TO SUPPORT A CONDUCTOR OR AN ITEM AT A PREDETERMINED SPACING FROM A MOUNTING SURFACE. IT MAY INCLUDE MOUNTING AND/OR CONDUCTING HARDWARE.]. This item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. There is no information in the HMIRS; however, the NSN is in an FSC in Table II of Federal Standard 313 and an MSDS may be required by the user. The requirement for an MSDS is dependent on a hazard determination of the supplier or the intended end use of the product. NSN 5970010697557 does not contain precious metals.

This NSN is associated to Schedule B 8546900000: electrical insulators, nesoi. The Schedule B End Use is listed as electric apparatus. NAICS classification category 326199: all other plastics product manufacturing.

This information was last updated on .


Technical Characteristics

UNABLE TO DECODE
(CQBP) UNABLE TO DECODE AND UNABLE TO DECODE
MATERIAL AND LOCATION
(MTLC) OVERALL PLASTIC, EPOXY, MIL-P-18177, TYPE GEE
UNABLE TO DECODE
(MTLC) UNABLE TO DECODE
DIELECTRIC MATERIAL VOLTAGE RATING PER MIL THICKNESS IN VOLTS
(ACGY) ANY ACCEPTABLE
SCREW THREAD QUANTITY PER INCH AND LOCATION
(CQTP) 32 MOUNTING FACILITY ERR-100 ERR-100
SCREW THREAD DIAMETER AND LOCATION
(CRFL) 0.138 MOUNTING FACILITY INCHES NOMINAL ERR-100 ERR-100
THREAD LENGTH AND LOCATION
(CQJM) 0.207 MOUNTING FACILITY INCHES NOMINAL ERR-100 ERR-100
OUTSIDE DIAMETER
(ABKV) 0.375 INCHES NOMINAL
OVERALL HEIGHT
(ABKW) 4.190 INCHES NOMINAL
MATERIAL
(MATT) GLASS FIBER AND PLASTIC EPOXY OVERALL
MOUNTING FACILITY TYPE AND QUANTITY
(AXHR) 1 THREADED HOLE
SCREW THREAD DIAMETER AND LOCATION
(CRFL) 0.138 ELECTRICAL TERMINATION INCHES NOMINAL AND 0.138 MOUNTING FACILITY INCHES NOMINAL
SCREW THREAD QUANTITY PER INCH AND LOCATION
(CQTP) 32 ELECTRICAL TERMINATION AND 32 MOUNTING FACILITY
SPECIAL FEATURES
(FEAT) SAME AS STYLE M1 EXCEPT MIDDLE NARROWS WITH A 0.060 IN. RADIUS TO 0.250 IN. W X 3.490 IN. LONG
STYLE DESIGNATOR
(STYL) PILLAR
THREAD LENGTH
(AASA) 0.207 INCHES NOMINAL
THREAD LOCATION
(APJC) MOUNTING FACILITY AND ELECTRICAL TERMINATION
UNABLE TO DECODE
(CQJM) UNABLE TO DECODE AND UNABLE TO DECODE
MATERIAL AND LOCATION
(MALC) GLASS FIBER OVERALL AND PLASTIC EPOXY OVERALL
SCREW THREAD SERIES DESIGNATOR AND LOCATION
(CQBP) MOUNTING FACILITY UNC ERR-100 ERR-100
THREAD LENGTH AND LOCATION
(CQJM) 0.207 ELECTRICAL TERMINATION INCHES NOMINAL AND 0.207 MOUNTING FACILITY INCHES NOMINAL
SCREW THREAD SERIES DESIGNATOR AND LOCATION
(CQBP) ELECTRICAL TERMINATION UNC AND MOUNTING FACILITY UNC
UNABLE TO DECODE
(MALC) UNABLE TO DECODE AND UNABLE TO DECODE

Manufacturer Part Numbers


Related Inventory



 
Top