ISO Group Logo
Defense and Aerospace
Supply Chain Partner
A Dynatech International Company


NSN 5985-00-840-2394, 5985008402394
Cancelled -> Replaced by 5985009177343

Federal Supply Classification
FSC 5985 - Antennas, Waveguides, and Related Equipment
National Item Identification Number
NIIN 008402394
Codification Country
United States
Item Name Code
INC 00838
Criticality
(X) This item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
Hazardous Material Indicator Code
(P) There is no information in the HMIRS; however, the NSN is in an FSC in Table II of Federal Standard 313 and an MSDS may be required by the user. The requirement for an MSDS is dependent on a hazard determination of the supplier or the intended end use of the product.
Availability: In Stock Qualified Suppliers: Currently qualifying suppliers

Manufacture or supply this part?
Join our growing community of certified suppliers.

Let Us Know
  CALL ABOUT NSN 5985-00-840-2394
Our client representatives are standing by to help fulfill your request.

+1-321-773-5710

  REQUEST QUOTE for 5985-00-840-2394


Have a list that needs to be quoted? Upload it here.

DLMS® Summary

National Stock Number 5985-00-840-2394

National Stock Number (NSN) 5985-00-840-2394, or NIIN 008402394, (attenuator,variable) was assigned December 16, 1966 in the Federal Logistics Information System (FLIS). This NIIN is Available for Manual Assignment. This NSN replaces 1 stock number, 5985009177343.

There are 4 manufacturer part numbers associated with this NSN. 3 of those part number(s) are considered obsolete. The manufacturer part numbers were originally supplied by 2 suppliers. Today, 2 suppliers are listed as Active suppliers for this NSN. Of the active suppliers, only one supplier is deemed design controlled or valid supply parts.

This part number has not been procured by the US Government in over 5 years.

There has been very little demand for this national stock number. The demand for this NSN originated from less than 5 countries. Based on a planned procurement review by the Primary Inventory Control Activity (PICA) on Sep 04, 2020, this NSN's acquisition method was noted as: Acquire directly from the actual manufacturer, whether or not the prime contractor is the actual manufacturer. The Government physically does not have in its possession sufficient, accurate, or legible data to purchase this part from other than current source(s). (NOTE: This code is applicable only to parts under immediate buy requirements and only as long as the deficiency is under review for resolution and appropriate recoding.) Valid AMCs: 1, 2, 3, 4 and 5.

This NSN is assigned to Item Name Code (INC) 00838. [A DEVICE FOR REDUCING THE STRENGTH OF AN ALTERNATING CURRENT SIGNAL EITHER CONTINUOUSLY OR IN STEPS, WITHOUT CAUSING APPRECIABLE SIGNAL DISTORTION, BY MAINTAINING SUBSTANTIALLY CONSTANT OUTPUT AND/OR INPUT IMPEDANCE MATCH. CONTINUOUSLY VARIABLE RESISTIVE DEVICES MUST CONSIST OF AT LEAST TWO SECTIONS OR ONE SECTION WITH AT LEAST TWO ROTATING CONTACTS. THE ITEM MUST HAVE AN OVERALL ATTENUATION RATING. INCLUDES TANDEM MOUNTED VARIABLE RESISTORS DESIGNED TO FUNCTION AS AN ATTENUATOR BUT WHOSE TERMINALS ARE NOT CONNECTED. SEE ALSO RESISTOR, VAIABLE (AS MODIFIED).]. This item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. There is no information in the HMIRS; however, the NSN is in an FSC in Table II of Federal Standard 313 and an MSDS may be required by the user. The requirement for an MSDS is dependent on a hazard determination of the supplier or the intended end use of the product. NSN 5985008402394 contains an unknown precious metal.

This NSN is associated to Schedule B 8529109000: antenna & antenna reflectors of all kinds; parts suitable for use soley or principally w/ apparatus of heading 8525 to 8528, nesoi. The Schedule B End Use is listed as telecommunications equipment. NAICS classification category 334220: radio and television broadcasting and wireless communications equipment manufacturing.

This information was last updated on .


Technical Characteristics

OVERALL ATTENUATION RANGE IN DECIBELS
(ASYD) +0.5/+10.0
MOUNTING FACILITY TYPE AND QUANTITY
(AXHR) 3 THREADED STUD
OVERALL ATTENUATION ACCURACY IN DECIBELS
(BQNR) -0.20/+0.20
MOUNTING FACILITY SCREW THREAD SERIES DESIGNATOR
(AKEJ) UNC
ADJUSTMENT DEVICE TYPE AND QUANTITY
(CQTQ) 1 KNOB
APPLICATION DESIGN
(AAFS) TRANSMISSION LINE
ATTENUATION VARIATION METHOD
(ASYF) CONTINUOUS
BODY STYLE
(AAQL) COAXIAL TYPE
CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO WIDTH
(ABKR) 4.500 INCHES NOMINAL
CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO LENGTH
(ABKQ) 2.250 INCHES NOMINAL
COAXIAL CONNECTOR SERIES DESIGNATION
(AHUC) N
FREQUENCY RANGE
(BNGR) 0.000 HERTZ MINIMUM AND 1.000 GIGAHERTZ MAXIMUM
IMPEDANCE RATING IN OHMS
(CTGG) 50.0 INPUT-OUTPUT
INSERTION LOSS AT MINIMUM ATTENUATION IN MAXIMUM DECIBELS
(ASYC) 0.8
MOUNTING FACILITY NOMINAL SCREW THREAD DIAMETER
(CRYY) 0.190 INCHES
MOUNTING FACILITY SCREW THREAD SERIES DESIGNATOR
(AKEJ) UNIFIED NATIONAL COARSE (UNC)
MOUNTING FACILITY TYPE AND QUANTITY
(AXHR) 3 THREADED STUD(S)
MOUNTING THREAD QUANTITY
(CGGK) 32 PER INCH
OVERALL ATTENUATION ACCURACY IN DECIBELS
(BQNR) -0.20 TO 0.20
OVERALL ATTENUATION RANGE IN DECIBELS
(ASYD) +0.5 TO 10.0
OVERALL HEIGHT
(ABKW) 2.940 INCHES MAXIMUM
OVERALL LENGTH
(ABHP) 6.875 INCHES MINIMUM AND 7.000 INCHES MAXIMUM
OVERALL WIDTH
(ABMK) 5.438 INCHES MINIMUM AND 5.562 INCHES MAXIMUM
POWER RATING
(AJDB) 2.0 WATTS PEAK
SCALE LINEARITY
(ABWF) NONLINEAR
SCALE DIVISION QUANTITY
(ABWG) 50
TERMINAL TYPE AND QUANTITY
(TTQY) 1 CONNECTOR, COAXIAL, MALE AND 1 CONNECTOR, COAXIAL, FEMALE
VOLTAGE STANDING WAVE RATIO
(AHTW) 1.50
III APPLICATION DESIGN
(AAFS) TRANSMISSION LINE

Manufacturer Part Numbers


Related Inventory

MS9058-12
Condition NE
RING
In Stock
QUA62905
Quality Park Ope
Condition NE
Quality Park Op
In Stock
TARIFF FEE
Condition NE
TARIFF FEE FOR
In Stock
ATPN-95-6
MTF905-60
Condition NE
EDDY CURRENT, S
In Stock
9057
Condition NE
Readily Available
905-135
Condition FN
Nylon Tubular,
Readily Available
905
Condition NE
Readily Available
905-125
Condition FN
Nylon Tubular,
Readily Available
905-150
Condition FN
Nylon Tubular,
Readily Available
905-200
Condition FN
Nylon Tubular,
Readily Available
905-100
Condition FN
Nylon Tubular,
Readily Available
905-080
Condition FN
Nylon Tubular,
Readily Available
905-170
Condition FN
Nylon Tubular,
Readily Available
905-220
Condition FN
Nylon Tubular,
Readily Available
905-255
Condition NE
Readily Available
905-175
Condition NE
Readily Available
905-070
Condition NE
Readily Available
9058X
Condition FN
Readily Available
905-245
Condition NE
Readily Available
9059C
Condition FN
Readily Available
905-165
Condition NE
Readily Available
905-235
Condition FN
Nylon Tubular,
Readily Available
9059M

Condition NE
Belden 9059M CA
Readily Available
9059C

Condition NE
Readily Available
9058

Condition NE
Belden 9058 CAT
Readily Available
45EN61
C89201
Condition NE
Spiral Flute Ta
Readily Available
90522

Condition NE
Only Sold in th
Readily Available
90523

Condition NE
Only Sold in th
Readily Available
905-120
Condition NE
Readily Available
905-065
Condition NE
Readily Available
905-6
PLUG
Readily Available
905-160
Condition NE
Readily Available
9058C
Condition FN
Readily Available
9050
Condition NE
Readily Available
905-055
Condition NE
Readily Available
905-180
Condition NE
Readily Available
905-275
Condition NE
Readily Available
905-105
Condition NE
Readily Available
90546-1
Condition FN
ASSY PRO-CRIMPE
Readily Available
905-250
Condition NE
Readily Available
905-050
Condition NE
Readily Available
90560A
Condition NS
GASKET
Readily Available
90555
Condition NE
FILTER SCREEN
Readily Available
90560
Condition NS
GASKET
Readily Available
90574-2
Condition FN
PROCRIMPER DIE
Readily Available
90547-1
Condition FN
ASSY PRO-CRIMPE
Readily Available
90574-1
Condition FN
ASSY PRO-CRIMPE
Readily Available
905-190
Condition NE
Readily Available
90-542
Condition NS
WASHER
Readily Available
90548-1
Condition FN
ASSY PRO-CRIMPE
Readily Available
905304
BALL BEARING
Readily Available
905307
BOLT PASSAGE
Readily Available
905.291
Condition NE
PLATE , NOZZLE
Readily Available
90531K
Condition NE
CLAMP LOOP
Readily Available
9053
Condition NE
Readily Available
905260
BEARING
Readily Available
905776
PART
Readily Available
90591-2
Condition FN
SHEAR,LEFT (U-P
Readily Available
90-5-2
Condition NS
KNOB
Readily Available
905205
BEARING
Readily Available
905207
BEARING
Readily Available
905211
BEARING
Readily Available
905310
BEARING
Readily Available
905599
BEARING
Readily Available
905210
ZQ BEARING
Readily Available
905212
BEARING
Readily Available
905223
LINK-DRV
Readily Available
905311
BEARING
Readily Available
905-B6
PLUG
Readily Available
90-53-41
Condition FN
MIDSHIP TUBE, S
Readily Available
90-53-31
Condition FN
MIDSHIP TUBE, S
Readily Available
90-53-21
Condition FN
MIDSHIP TUBE, S
Readily Available
90-53-11
Condition FN
MIDSHIP TUBE, S
Readily Available
905706
Condition FN
SLIP JOINT
Readily Available
905588
Condition FN
TIGHT JOINT
Readily Available
905372
Condition FN
SLIP JOINT
Readily Available
905235
Condition FN
TIGHT JOINT
Readily Available
905143
Condition FN
SLIP JOINT
Readily Available
90538
Condition FN
95 X 24 WIRE
Readily Available
905.304
Condition NE
THERMOSTAT
Readily Available
905412
Condition NE
BRACKET
Readily Available
90563
Compressor
Request


 
Top