ISO Group Logo
Defense and Aerospace
Supply Chain Partner
A Dynatech International Company


NSN 5999-01-099-0098, 5999010990098
SHIELDING GASKET,ELECTRONIC

Federal Supply Classification
FSC 5999 - Miscellaneous Electrical and Electronic Components
National Item Identification Number
NIIN 010990098
Codification Country
United States
Item Name Code
INC 20281
Criticality
(S) The item is a non-aviation Critical Safety Item (CSI) whose failure will result in serious damage to equipment or serious injury or death to personnel.
Hazardous Material Indicator Code
(P) There is no information in the HMIRS; however, the NSN is in an FSC in Table II of Federal Standard 313 and an MSDS may be required by the user. The requirement for an MSDS is dependent on a hazard determination of the supplier or the intended end use of the product.
Availability: Readily Available Qualified Suppliers: Currently qualifying suppliers

Manufacture or supply this part?
Join our growing community of certified suppliers.

Let Us Know
  CALL ABOUT NSN 5999-01-099-0098
Our client representatives are standing by to help fulfill your request.

+1-321-773-5710

  REQUEST QUOTE for 5999-01-099-0098


Have a list that needs to be quoted? Upload it here.

DLMS® Summary

National Stock Number 5999-01-099-0098

National Stock Number (NSN) 5999-01-099-0098, or NIIN 010990098, (shielding gasket,electronic) was assigned August 9, 1980 in the Federal Logistics Information System (FLIS). This NIIN is Available for Manual Assignment. This NSN does not replace any other NSNs.

There are 3 manufacturer part numbers associated with this NSN. None of the associated part number(s) are considered obsolete. The manufacturer part numbers were originally supplied by one supplier. Today, one supplier is listed as an Active supplier for this NSN. Of the active suppliers, there are no suppliers that are deemed design controlled or valid supply parts.

This part number has not been procured by the US Government in over 5 years.

This NSN is unique to one weapons system.

Based on a planned procurement review by the Primary Inventory Control Activity (PICA) on Jul 03, 2013, this NSN's acquisition method was noted as: Suitable for Competitive Acquisition. (Potential sources shall include dealers/distributors.) This part requires engineering source approval by the design control activity in order to maintain the quality of the part. An alternate source must qualify in accordance with the design control activity's procedures, as approved by the cognizant Government engineering activity. Valid AMCs: 1, 2, 3, 4 and 5.

This NSN is assigned to Item Name Code (INC) 20281. [A SHAPED METALLIC ITEM DESIGNED TO INCREASE THE EFFECTIVENESS OF RADIO FREQUENCY/ELECTROMAGNETIC INTERFERENCE, OR A NONMETALLIC ITEM CONTAINING A WIRE MESH, METAL, OR OTHER ELECTRICALLY CONDUCTIVE PARTICLES DESIGNED TO PROVIDE ENVIRONMENTAL SEALING AND RADIO FREQUENCY/ELECTROMAGNETIC INTERFERENCE SHIELDING. FOR BULK ITEMS SEE WIRE MESH, KNITTED OR GASKETING MATERIAL, CONDUCTIVE.]. The item is a non-aviation Critical Safety Item (CSI) whose failure will result in serious damage to equipment or serious injury or death to personnel. There is no information in the HMIRS; however, the NSN is in an FSC in Table II of Federal Standard 313 and an MSDS may be required by the user. The requirement for an MSDS is dependent on a hazard determination of the supplier or the intended end use of the product. NSN 5999010990098 contains an unknown precious metal.

This NSN is associated to Schedule B 8543909000: electrical machines and apparatus parts, nesoi. The Schedule B End Use is listed as electric apparatus. NAICS classification category 335999: all other miscellaneous electrical equipment and component manufacturing.

This information was last updated on .


Technical Characteristics

APERTURE DIAMETER
(ABVL) 0.781 INCHES NOMINAL
BOLT HOLE QUANTITY
(AECS) 4
CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG LENGTH
(ADUZ) 0.906 INCHES NOMINAL
CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG WIDTH
(ADUY) 0.906 INCHES NOMINAL
CRITICALITY CODE JUSTIFICATION
(CRTL) ZZZY
CROSS-SECTIONAL THICKNESS
(ADVM) 0.062 INCHES NOMINAL
ENVIRONMENTAL PROTECTION MATERIAL LOCATION
(CTNJ) THROUGHOUT RF SHIELDING GASKET
HOLE DIAMETER
(AAUB) 0.156 INCHES NOMINAL
OUTSIDE EDGE TO BOLT HOLE CENTER DISTANCE ALONG WIDTH
(ADVD) 0.172 INCHES NOMINAL
OUTSIDE EDGE TO BOLT HOLE CENTER DISTANCE ALONG LENGTH
(ADVE) 0.172 INCHES NOMINAL
OVERALL LENGTH
(ABHP) 1.250 INCHES NOMINAL
OVERALL WIDTH
(ABMK) 1.250 INCHES NOMINAL
MATERIAL
(MATT) RUBBER SILICONE CLASS Q ENVIRONMENTAL SEAL
REFERENCE NUMBER DIFFERENTIATING CHARACTERISTICS
(ZZZY) AREFERENCE NUMBER DIFFERENTIATING MATERIAL WILL BE IN ACCORDANCE WITH NAVAL INVENTORY CONTROL POINT ACTIVITY HX QUALITY CONTROL. MANUFACTURING AND TESTING SPECIFICATIONS AVAILABLE AT THE DLA ICP
SPECIAL FEATURES
(FEAT) ITEM MUST COMPLY WITH REQUIREMENTS OF DEFENSE SUPPLY CENTER COLUMBUS PRODUCTION STANDARD NO. LO2923

Manufacturer Part Numbers


Related Inventory

57-067-214
301118530
Condition FN
#8x36 NOGO 3B T
Readily Available
57-067-614
361118530
Condition FN
#8-36 2A NOGO R
Readily Available
7111-853
5330011495809
Condition NS
RING
Readily Available
11/18/5397
Condition FN
60803B123 SPRI
Readily Available
7111-853
5331013066584
Condition NS
PACKING
Readily Available
7111-853
5330013066584
Condition NS
PACKING
Readily Available
11/18/5380
Condition FN
60712G124 TOOL
Readily Available
11/18/5381
Condition FN
60712G127 MOUN
Readily Available
11/18/5383
Condition FN
60712G103 INSU
Readily Available
11-1/8-5353-9
3120010272772
Condition NS
BEARING
Readily Available
11/18/5390
Condition FN
60838A106 CONDU
Readily Available
11/18/5376
Condition FN
60804F144 CUT-O
Readily Available
11/18/5384
Condition FN
60712G105 CUT-
Readily Available
11/18/5394
Condition FN
60709D107 COMB
Readily Available
11-1-1853-4
1670005258198
Condition NE
STRAP
Readily Available
4820011118535
4820-01-111-8535
Request


 
Top