ISO Group Logo
Defense and Aerospace
Supply Chain Partner
A Dynatech International Company


NSN 6525-01-512-1960, 6525015121960
PROCESSING MACHINE,PHOTOGRAPHIC

Federal Supply Classification
FSC 6525 - Imaging Equipment and Supplies: Medical, Dental, Veterinary
National Item Identification Number
NIIN 015121960
Codification Country
United States
Item Name Code
INC 06110
Criticality
(X) This item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
Hazardous Material Indicator Code
(P) There is no information in the HMIRS; however, the NSN is in an FSC in Table II of Federal Standard 313 and an MSDS may be required by the user. The requirement for an MSDS is dependent on a hazard determination of the supplier or the intended end use of the product.
Availability: Readily Available Qualified Suppliers: Currently qualifying suppliers

Manufacture or supply this part?
Join our growing community of certified suppliers.

Let Us Know
  CALL ABOUT NSN 6525-01-512-1960
Our client representatives are standing by to help fulfill your request.

+1-321-773-5710

  REQUEST QUOTE for 6525-01-512-1960


Have a list that needs to be quoted? Upload it here.

DLMS® Summary

National Stock Number 6525-01-512-1960

National Stock Number (NSN) 6525-01-512-1960, or NIIN 015121960, (processing machine,photographic) was assigned August 26, 2003 in the Federal Logistics Information System (FLIS). This NIIN is Available for Manual Assignment. This NSN does not replace any other NSNs.

There are 2 manufacturer part numbers associated with this NSN. None of the associated part number(s) are considered obsolete. The manufacturer part numbers were originally supplied by one supplier. Today, one supplier is listed as an Active supplier for this NSN. Of the active suppliers, only one supplier is deemed design controlled or valid supply parts.

This part number has not been procured by the US Government in over 5 years.

This NSN is somewhat common among different platforms, belonging to 4 different weapons systems.

Based on a planned procurement review by the Primary Inventory Control Activity (PICA) on Dec 02, 2006, this NSN's acquisition method was noted as: Acquire directly from the actual manufacturer, whether or not the prime contractor is the actual manufacturer. This part is a commercial/non-developmental/off-the-shelf-item. Valid AMCs: 1, 2, 3, 4 and 5.

This NSN is assigned to Item Name Code (INC) 06110. [A MACHINE DESIGNED FOR PROCESSING PHOTOGRAPHIC FILM IN CONTINUOUS AND AUTOMATIC OPERATION. IT MUST HAVE FACILITIES FOR DEVELOPING AND FIXING. IT MAY OR MAY NOT HAVE FACILITIES FOR WASHING AND DRYING.]. This item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. There is no information in the HMIRS; however, the NSN is in an FSC in Table II of Federal Standard 313 and an MSDS may be required by the user. The requirement for an MSDS is dependent on a hazard determination of the supplier or the intended end use of the product. NSN 6525015121960 does not contain precious metals.

This information was last updated on .


Technical Characteristics

CURRENT TYPE
(ACDC) AC
FREQUENCY RATING
(ACZB) 60.0 HERTZ NOMINAL
INSTALLATION DESIGN
(AMQY) PORTABLE
LOADING CHARACTERISTIC
(AKHW) DAYLIGHT
LOADING TYPE
(BJMX) MAGAZINE
PART NAME ASSIGNED BY CONTROLLING AGENCY
(CXCY) MODEL A/T 2000 X-RAY FILM PROCESSOR
PHASE
(FAAZ) SINGLE
SPECIAL FEATURES
(FEAT) 8 AMPS; THREE PRONG PLUG REQUIRED; 2.5 MINUTE ENDO QUICK LOOK FILM PROCESSING; 5.5 MINUTE ARCHIVAL FILM PROCESSING; WATER FLOE .5 GPM; REQUIRES 80 PSI MAX WATER PRESSURE WITH 30PSI MIN; WATER SOURCE MUST HAVE MANUAL SHUT OFF NEAR PROCESSOR; ADAPTERS TO CONNECT .5 INCH MPT OR .75 INCH MALE GARDEN HOSE FITTING; SUPPLIED TUBING AT REAR OF PROCESSOR IS 6 FEET LONG; VACUUM BREAKER NOT REQUIRED; 1 INCH AIR GAP BETWEEN WATER SUPPLY INLET AND TOP OF TANK; WATER TEMP 55 DEG F TO 80 DEG F; MIXING VALVE NOT REQUIRED IF WATER TEMP IS IN RANGE; 1.5 INCH PVC STANDPIPE CONNECTED TO A 1.5 INCH PVC TRAP; DO NOT DRAIN INTO COPPER OR BRASS
SPECIFIC USE
(AFJF) FILM PROCESSING MACHINE
TEMP CONTROLLED FEATURE
(BJLR) INCLUDED
USAGE DESIGN
(ALBY) FILM
VOLTAGE IN VOLTS
(ELEC) 115.0
III CURRENT TYPE
(ACDC) AC

Manufacturer Part Numbers


Related Inventory

T18RA5000HSW
Condition FN
CABLE TIE FOR A
Readily Available
T18RA50
Condition FN
CABLE TIE FOR A
Readily Available
G0984709
IAT-2000-10X
Condition NE
Standard, Threa
Readily Available
53DK53
HAT2000
Condition NE
Hydraulic Press
Readily Available
16T241
SAT-2000-10
Condition NE
Threading Tool:
Readily Available
16T242
SAT-2000-5
Condition NE
Threading Tool:
Readily Available
16T243
SAT-2000-6
Condition NE
Threading Tool:
Readily Available
16T244
SAT-2000-7
Condition NE
Threading Tool:
Readily Available
16T245
SAT-2000-8
Condition NE
Threading Tool:
Readily Available
16T246
SAT-2000-9
Condition NE
Threading Tool:
Readily Available
16T057
IAT-2000-10
Condition NE
Threading Tool:
Readily Available
16T058
IAT-2000-5
Condition NE
Threading Tool:
Readily Available
16T059
IAT-2000-6
Condition NE
Threading Tool:
Readily Available
16T060
IAT-2000-8
Condition NE
Threading Tool:
Readily Available
PMAT-2000

Condition NE
Teledyne Contro
Readily Available
T18RA5000
Condition FN
CABLE TIE FOR A
Readily Available


 
Top