ISO Group Logo
Defense and Aerospace
Supply Chain Partner
A Dynatech International Company


NSN 6635-00-936-7227, 6635009367227
TENSIOMETER

Federal Supply Classification
FSC 6635 - Physical Properties Testing and Inspection
National Item Identification Number
NIIN 009367227
Codification Country
United States
Item Name Code
INC 81048
Criticality
(X) This item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
Hazardous Material Indicator Code
(N) There is no data in the HMIRS and the NSN is in an FSC not generally suspected of containing hazardous materials.
Availability: Request Qualified Suppliers: Currently qualifying suppliers

Manufacture or supply this part?
Join our growing community of certified suppliers.

Let Us Know
  CALL ABOUT NSN 6635-00-936-7227
Our client representatives are standing by to help fulfill your request.

+1-321-773-5710

  REQUEST QUOTE for 6635-00-936-7227


Have a list that needs to be quoted? Upload it here.

DLMS® Summary

National Stock Number 6635-00-936-7227

National Stock Number (NSN) 6635-00-936-7227, or NIIN 009367227, (tensiometer) was assigned March 8, 1967 in the Federal Logistics Information System (FLIS). This NSN does not replace any other NSNs.

There are 2 manufacturer part numbers associated with this NSN. One of those part number(s) are considered obsolete. The manufacturer part numbers were originally supplied by 2 suppliers. Today, 2 suppliers are listed as Active suppliers for this NSN. Of the active suppliers, 2 suppliers are deemed design controlled or valid supply parts.

This part number has not been procured by the US Government in over 5 years.

Based on a planned procurement review by the Primary Inventory Control Activity (PICA) on Sep 02, 2000, this NSN's acquisition method was noted as: Acquire, for the first time, directly from the actual manufacturer rather than the prime contractor who is not the actual manufacturer. The Government physically does not have in its possession sufficient, accurate, or legible data to purchase this part from other than current source(s). (NOTE: This code is applicable only to parts under immediate buy requirements and only as long as the deficiency is under review for resolution and appropriate recoding.) Valid AMCs: 1, 2, 3, 4 and 5.

This NSN is assigned to Item Name Code (INC) 81048. This item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. There is no data in the HMIRS and the NSN is in an FSC not generally suspected of containing hazardous materials. NSN 6635009367227 does not contain precious metals.

This information was last updated on .


Technical Characteristics

SCALE RANGE
(APSK) +0.0/+100.0 POUNDS
III MATERIAL ACCOMMODATED DIAMETER
(BHHW) 0.250 INCHES NOMINAL
DEFLECTION ANGLE ADJUSTER
(BHHY) NOT INCLUDED
INDICATOR TYPE
(AMKD) DIAL
FUNCTIONAL DESCRIPTION
(FTLD) LOAD IS APPLIED AGAINST A HARDENED BALL WHICH ROTATES TO MAINTAIN VERTICAL ALIGNMENT AS PRESSURE INCREASES; THE BALL IS HELD IN PLACE WITH A SPRING CLIP; THE THREADED MOUNTING HOLE IS LOCATED OPPOSITE THE LOADING BALL IN THE BOTTOM OF THE BEAM
MATERIAL ACCOMMODATED DIAMETER
(BHHW) 0.250 INCHES NOMINAL
MOUNTING METHOD
(AXGY) BRACKET
SPECIAL FEATURES
(FEAT) A PRECISION DIAL INDICATOR IS MOUNTED AT THE NULL POINT OF THE DEFLECTION BEAM; THE POINTER REVOLVES 360 DEGREES CLOCKWISE UNDER COMPRESSION OR TENSION FORCES; ACCIDENTAL OVERLOADS UP TO 30 PERCENT OF CAPACITY CAN BE SAFELY SUSTAINED WITHOUT INJURY TO THE DIAL INDICATOR OR DEFLECTION BEAM; ALL CAPACITIES FEATURE A 5:1 DESIGN SAFETY FACTOR; MAY BE MOUNTED HORIZONTALLY, VERTICALLY OR FLAT; THE BAKED ENAMEL FINISH RESISTS CORROSION AND RUST; ACCURACY OF +/- ONE PERCENT OF FULL CAPACITY; DIAL DIVISION ONE LBS INCREMENTS
SCALE NAME
(ASPX) COMPRESSION
SCALE QUANTITY
(APSJ) 1
SCALE RANGE
(APSK) +0.0 TO 100.0 POUNDS
SUPPLEMENTARY FEATURES
(SUPP) INDICATOR TYPE DIAL
TEMPERATURE COMPENSATOR
(BGTX) NOT INCLUDED
FUNCTIONAL DESCRIPTION
(FTLD) 3LOAD IS APPLIED AGAINST A HARDENED BALL WHICH ROTATES TO MAINTAIN VERTICAL ALIGNMENT AS PRESSURE INCREASES; THE BALL IS HELD IN PLACE WITH A SPRING CLIP; THE THREADED MOUNTING HOLE IS LOCATED OPPOSITE THE LOADING BALL IN THE BOTTOM OF THE BEAM
CARRYING CASE
(AFJU) NOT PROVIDED

Manufacturer Part Numbers


Related Inventory



 
Top