ISO Group Logo
Defense and Aerospace
Supply Chain Partner
A Dynatech International Company


NSN 9390-00-436-3036, 9390004363036
BELLOWS,PROTECTION

Federal Supply Classification
FSC 9390 - Miscellaneous Fabricated Nonmetallic Materials
National Item Identification Number
NIIN 004363036
Codification Country
United States
Item Name Code
INC 35168
Criticality
(X) This item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
Hazardous Material Indicator Code
(P) There is no information in the HMIRS; however, the NSN is in an FSC in Table II of Federal Standard 313 and an MSDS may be required by the user. The requirement for an MSDS is dependent on a hazard determination of the supplier or the intended end use of the product.
Availability: Readily Available Qualified Suppliers: Currently qualifying suppliers

Manufacture or supply this part?
Join our growing community of certified suppliers.

Let Us Know
  CALL ABOUT NSN 9390-00-436-3036
Our client representatives are standing by to help fulfill your request.

+1-321-773-5710

  REQUEST QUOTE for 9390-00-436-3036


Have a list that needs to be quoted? Upload it here.

DLMS® Summary

National Stock Number 9390-00-436-3036

National Stock Number (NSN) 9390-00-436-3036, or NIIN 004363036, (bellows,protection) was assigned March 26, 1969 in the Federal Logistics Information System (FLIS). This NIIN is Available for Manual Assignment. This NSN does not replace any other NSNs.

There are 3 manufacturer part numbers associated with this NSN. None of the associated part number(s) are considered obsolete. The manufacturer part numbers were originally supplied by 2 suppliers. Today, 2 suppliers are listed as Active suppliers for this NSN. Of the active suppliers, 2 suppliers are deemed design controlled or valid supply parts.

This part number has not been procured by the US Government in over 5 years.

Based on a planned procurement review by the Primary Inventory Control Activity (PICA) on Mar 02, 2006, this NSN's acquisition method was noted as: Acquire directly from the actual manufacturer, whether or not the prime contractor is the actual manufacturer. The Government physically does not have in its possession sufficient, accurate, or legible data to purchase this part from other than current source(s). (NOTE: This code is applicable only to parts under immediate buy requirements and only as long as the deficiency is under review for resolution and appropriate recoding.) Valid AMCs: 1, 2, 3, 4 and 5.

This NSN is assigned to Item Name Code (INC) 35168. [A NONMETALLIC, ACCORDIAN SHAPED PROTECTIVE COVERING DESIGNED TO FLEX DUE TO RELATIVE MOTION BETWEEN PARTS TO WHICH ITS OPPOSITE ENDS ARE ATTACHED. IT IS PRIMARILY USED TO COVER THE OPENING AROUND A MOVABLE PUSH-PULL ROD OR PART PASSING THROUGH A HOLE IN A BULKHEAD, PARTITION OR THE LIKE.]. This item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. There is no information in the HMIRS; however, the NSN is in an FSC in Table II of Federal Standard 313 and an MSDS may be required by the user. The requirement for an MSDS is dependent on a hazard determination of the supplier or the intended end use of the product. NSN 9390004363036 contains an unknown precious metal.

This NSN is associated to Schedule B 4016930000: gaskets, washers and other seals, of vulcanized rubber other than hard rubber. The Schedule B End Use is listed as industrial rubber products. NAICS classification category 339991: gasket, packing, and sealing device manufacturing.

This information was last updated on .


Technical Characteristics

CONTRACTED LENGTH
(ATEN) 2.755 INCHES NOMINAL
EXTENDED LENGTH
(ATEM) 6.585 INCHES NOMINAL
LARGE END INSIDE DIAMETER
(CDDB) 1.525 INCHES NOMINAL
LARGE END INSIDE LENGTH
(CPYM) 0.175 INCHES NOMINAL
LARGE END OUTSIDE DIAMETER
(AHMG) 1.905 INCHES NOMINAL
LARGE END OUTSIDE LENGTH
(CPYS) 0.325 INCHES NOMINAL
MATERIAL
(MATT) RUBBER SYNTHETIC
NEUTRAL LENGTH
(CPYN) 4.670 INCHES NOMINAL
SMALL END INSIDE DIAMETER
(CDDD) 0.550 INCHES NOMINAL
SMALL END INSIDE LENGTH
(CPYT) 0.122 INCHES NOMINAL
SMALL END OUTSIDE DIAMETER
(AHMH) 0.650 INCHES NOMINAL
SMALL END OUTSIDE LENGTH
(CPYF) 0.555 INCHES NOMINAL
SPECIAL FEATURES
(FEAT) 0.705 IN. OD,0.122 IN. LG COLLAR ON SMALL END
THICKNESS AT BOTH ENDS
(CPYX) 0.100 INCHES MINIMUM AND 0.380 INCHES MAXIMUM
THICKNESS BETWEEN ENDS
(CPYW) 0.050 INCHES NOMINAL

Manufacturer Part Numbers


Related Inventory

71-700-062
Condition FN
242013 1/16X7/1
Readily Available
G2420135
27603
Condition NE
Cleaning/Dip Ta
Readily Available
G2420139
CAMCABLE-20
Condition NE
Camera Cable, 6
Readily Available
012382-42013

Condition NE
Weiler 420 Push
Readily Available
24201388
5330014567886
Condition NS
O-RING
Readily Available
24201355G2
KNOBS
Readily Available
42420-139
5306012856337
Condition NS
BOLT
Readily Available
242-0131-00
5340012393338
Condition NS
STRAP
Readily Available
24201378
2520014108080
Condition NS
HOUSING
Readily Available
2420-1398G2
5355009551713
Condition NS
KNOB
Readily Available
12420132
2510013884877
Condition NS
BRACE
Readily Available
12420136
5340013813789
Condition NS
PLATE
Readily Available
MS24694C68
5305008242013
Condition FN
Desc: 10-32 X 1
Request
MS24694-C68
5305-00-824-2013
Condition NE
Machine Screw -
Request


 
Top