ISO Group Logo
Defense and Aerospace
Supply Chain Partner
A Dynatech International Company


NSN 9390-00-453-8754, 9390004538754
BELLOWS,PROTECTION

Federal Supply Classification
FSC 9390 - Miscellaneous Fabricated Nonmetallic Materials
National Item Identification Number
NIIN 004538754
Codification Country
United States
Item Name Code
INC 35168
Criticality
(X) This item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
Hazardous Material Indicator Code
(P) There is no information in the HMIRS; however, the NSN is in an FSC in Table II of Federal Standard 313 and an MSDS may be required by the user. The requirement for an MSDS is dependent on a hazard determination of the supplier or the intended end use of the product.
Availability: Readily Available Qualified Suppliers: Currently qualifying suppliers

Manufacture or supply this part?
Join our growing community of certified suppliers.

Let Us Know
  CALL ABOUT NSN 9390-00-453-8754
Our client representatives are standing by to help fulfill your request.

+1-321-773-5710

  REQUEST QUOTE for 9390-00-453-8754


Have a list that needs to be quoted? Upload it here.

DLMS® Summary

National Stock Number 9390-00-453-8754

National Stock Number (NSN) 9390-00-453-8754, or NIIN 004538754, (bellows,protection) was assigned September 16, 1972 in the Federal Logistics Information System (FLIS). This NSN does not replace any other NSNs.

There are 2 manufacturer part numbers associated with this NSN. One of those part number(s) are considered obsolete. The manufacturer part numbers were originally supplied by 2 suppliers. Today, one supplier is listed as an Active supplier for this NSN. Of the active suppliers, there are no suppliers that are deemed design controlled or valid supply parts.

This part number has not been procured by the US Government in over 5 years.

Based on a planned procurement review by the Primary Inventory Control Activity (PICA) on Mar 02, 2006, this NSN's acquisition method was noted as: Acquire only from the prime contractor although the engineering data identifies the Commercial and Government Entity Code (CAGE) and part number of a source other than the prime contractor. The Government physically does not have in its possession sufficient, accurate, or legible data to purchase this part from other than current source(s). (NOTE: This code is applicable only to parts under immediate buy requirements and only as long as the deficiency is under review for resolution and appropriate recoding.) Valid AMCs: 1, 2, 3, 4 and 5.

This NSN is assigned to Item Name Code (INC) 35168. [A NONMETALLIC, ACCORDIAN SHAPED PROTECTIVE COVERING DESIGNED TO FLEX DUE TO RELATIVE MOTION BETWEEN PARTS TO WHICH ITS OPPOSITE ENDS ARE ATTACHED. IT IS PRIMARILY USED TO COVER THE OPENING AROUND A MOVABLE PUSH-PULL ROD OR PART PASSING THROUGH A HOLE IN A BULKHEAD, PARTITION OR THE LIKE.]. This item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. There is no information in the HMIRS; however, the NSN is in an FSC in Table II of Federal Standard 313 and an MSDS may be required by the user. The requirement for an MSDS is dependent on a hazard determination of the supplier or the intended end use of the product. NSN 9390004538754 contains an unknown precious metal.

This information was last updated on .


Technical Characteristics

LARGE END INSIDE DIAMETER
(CDDB) 1.875 INCHES NOMINAL
SMALL END OUTSIDE LENGTH
(CPYF) 0.500 INCHES NOMINAL
NEUTRAL LENGTH
(CPYN) 4.000 INCHES NOMINAL
LARGE END OUTSIDE DIAMETER
(AHMG) 2.125 INCHES NOMINAL
LARGE END OUTSIDE LENGTH
(CPYS) 0.875 INCHES NOMINAL
EXTENDED LENGTH
(ATEM) 4.625 INCHES NOMINAL
THICKNESS AT BOTH ENDS
(CPYX) 0.250 INCHES MINIMUM AND 0.500 INCHES MAXIMUM
SMALL END INSIDE LENGTH
(CPYT) 0.500 INCHES NOMINAL
MATERIAL
(MATT) RUBBER
SMALL END OUTSIDE DIAMETER
(AHMH) 1.188 INCHES NOMINAL
SMALL END INSIDE DIAMETER
(CDDD) 0.688 INCHES NOMINAL
CONTRACTED LENGTH
(ATEN) 2.000 INCHES NOMINAL
THICKNESS BETWEEN ENDS
(CPYW) 0.062 INCHES NOMINAL
LARGE END INSIDE LENGTH
(CPYM) 0.875 INCHES NOMINAL

Manufacturer Part Numbers


Related Inventory

611462
TN611462
Condition NE
Tennant OEM Par
Readily Available
BLT5034
5306011611462
Condition NS
BOLT
Readily Available
2510-01-166-1146
011661146.2510
Condition NS
BOX, GLOVE
Readily Available
101-160019-36
Condition NS
RIB
Readily Available
M83461-1-462
Condition FN
Desc: PACKING;
Readily Available
M83461/1-462
Condition FN
Desc: PACKING;
Readily Available
101-160019-39
Condition NS
RIB
Readily Available
101-160019-37
BE1900
RIB- CENTER SEC
Readily Available


 
Top