ISO Group Logo
Defense and Aerospace
Supply Chain Partner
A Dynatech International Company


NSN 9390-00-753-9308, 9390007539308
BELLOWS,PROTECTION

Federal Supply Classification
FSC 9390 - Miscellaneous Fabricated Nonmetallic Materials
National Item Identification Number
NIIN 007539308
Codification Country
United States
Item Name Code
INC 35168
Criticality
(X) This item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
Hazardous Material Indicator Code
(P) There is no information in the HMIRS; however, the NSN is in an FSC in Table II of Federal Standard 313 and an MSDS may be required by the user. The requirement for an MSDS is dependent on a hazard determination of the supplier or the intended end use of the product.
Availability: Readily Available Qualified Suppliers: We have 3 qualified suppliers

Manufacture or supply this part?
Join our growing community of certified suppliers.

Let Us Know
  CALL ABOUT NSN 9390-00-753-9308
Our client representatives are standing by to help fulfill your request.

+1-321-773-5710

  REQUEST QUOTE for 9390-00-753-9308


Have a list that needs to be quoted? Upload it here.

DLMS® Summary

National Stock Number 9390-00-753-9308

National Stock Number (NSN) 9390-00-753-9308, or NIIN 007539308, (bellows,protection) was assigned January 1, 1962 in the Federal Logistics Information System (FLIS). This NIIN is Available for Manual Assignment. This NSN does not replace any other NSNs.

There are 5 manufacturer part numbers associated with this NSN. 3 of those part number(s) are considered obsolete. The manufacturer part numbers were originally supplied by 6 suppliers. Today, 4 suppliers are listed as Active suppliers for this NSN. Of the active suppliers, only one supplier is deemed design controlled or valid supply parts. ISO Group has several sources of supply for this NSN.

This part number has not been procured by the US Government in over 5 years.

This NSN is somewhat common among different platforms, belonging to 5 different weapons systems.

There has been very little demand for this national stock number. The demand for this NSN originated from less than 5 countries. Based on a planned procurement review by the Primary Inventory Control Activity (PICA) on Mar 02, 2006, this NSN's acquisition method was noted as: Suitable for Competitive Acquisition. (Potential sources shall include dealers/distributors.) The Government physically does not have in its possession sufficient, accurate, or legible data to purchase this part from other than current source(s). (NOTE: This code is applicable only to parts under immediate buy requirements and only as long as the deficiency is under review for resolution and appropriate recoding.) Valid AMCs: 1, 2, 3, 4 and 5.

This NSN is assigned to Item Name Code (INC) 35168. [A NONMETALLIC, ACCORDIAN SHAPED PROTECTIVE COVERING DESIGNED TO FLEX DUE TO RELATIVE MOTION BETWEEN PARTS TO WHICH ITS OPPOSITE ENDS ARE ATTACHED. IT IS PRIMARILY USED TO COVER THE OPENING AROUND A MOVABLE PUSH-PULL ROD OR PART PASSING THROUGH A HOLE IN A BULKHEAD, PARTITION OR THE LIKE.]. This item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. There is no information in the HMIRS; however, the NSN is in an FSC in Table II of Federal Standard 313 and an MSDS may be required by the user. The requirement for an MSDS is dependent on a hazard determination of the supplier or the intended end use of the product. NSN 9390007539308 contains an unknown precious metal.

This NSN is associated to Schedule B 4016930000: gaskets, washers and other seals, of vulcanized rubber other than hard rubber. The Schedule B End Use is listed as industrial rubber products. NAICS classification category 339991: gasket, packing, and sealing device manufacturing.

This information was last updated on .


Technical Characteristics

FSC APPLICATION DATA
(ZZZV) CYLINDER,BRAKE,MASTER,HYDRAULIC,VEHICULAR
LARGE END INSIDE DIAMETER
(CDDB) 1.719 INCHES NOMINAL
LARGE END INSIDE LENGTH
(CPYM) 0.219 INCHES NOMINAL
LARGE END OUTSIDE DIAMETER
(AHMG) 2.000 INCHES NOMINAL
LARGE END OUTSIDE LENGTH
(CPYS) 0.219 INCHES NOMINAL
MATERIAL DOCUMENT AND CLASSIFICATION
(MDCL) MIL-R-3065, TYPE S, CLASS SA, GRADE 405 MIL SPEC SINGLE MATERIAL RESPONSE
MATERIAL
(MATT) RUBBER SYNTHETIC
NEUTRAL LENGTH
(CPYN) 2.875 INCHES NOMINAL
SMALL END INSIDE DIAMETER
(CDDD) 0.812 INCHES NOMINAL
SMALL END INSIDE LENGTH
(CPYT) 0.125 INCHES NOMINAL
SMALL END OUTSIDE DIAMETER
(AHMH) 1.062 INCHES NOMINAL
SMALL END OUTSIDE LENGTH
(CPYF) 0.312 INCHES NOMINAL
THICKNESS AT BOTH ENDS
(CPYX) 0.125 INCHES NOMINAL
THICKNESS BETWEEN ENDS
(CPYW) 0.062 INCHES NOMINAL

Manufacturer Part Numbers

2284235

RNCC
5
RNVC
9
2284235

RNCC
5
RNVC
9
422M2

RNCC
5
RNVC
9
7539308

RNCC
5
RNVC
2
914318

RNCC
5
RNVC
9
FC12335

RNCC
3
RNVC
2
2284235

RNCC
C
RNVC
1

Related Inventory

01-914-318
96500
Condition FN
#18 260TN TIN 1
Readily Available
G9914318
ZS124
Condition NE
Photocontrol, 1
Readily Available
799AH8
19143_18_0
Condition NE
4142 Alloy Stee
Readily Available
687-422M232
Readily Available
687-422M262
Readily Available
8210-11
5365009143183
Condition NS
SPACER
Readily Available
FC12335
9390007539308
Condition NS
BELLOWS
Readily Available
FC-12335
9390007539308
Condition NS
BELLOWS
Readily Available
914318-5130
Condition FN
DRIVESHAFT
Readily Available
914318-5030
Condition FN
DRIVESHAFT
Readily Available


 
Top