ISO Group Logo
Defense and Aerospace
Supply Chain Partner
A Dynatech International Company


NSN 9390-01-016-6271, 9390010166271
BELLOWS,PROTECTION

Federal Supply Classification
FSC 9390 - Miscellaneous Fabricated Nonmetallic Materials
National Item Identification Number
NIIN 010166271
Codification Country
United States
Item Name Code
INC 35168
Criticality
(X) This item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
Hazardous Material Indicator Code
(P) There is no information in the HMIRS; however, the NSN is in an FSC in Table II of Federal Standard 313 and an MSDS may be required by the user. The requirement for an MSDS is dependent on a hazard determination of the supplier or the intended end use of the product.
Availability: Readily Available Qualified Suppliers: Currently qualifying suppliers

Manufacture or supply this part?
Join our growing community of certified suppliers.

Let Us Know
  CALL ABOUT NSN 9390-01-016-6271
Our client representatives are standing by to help fulfill your request.

+1-321-773-5710

  REQUEST QUOTE for 9390-01-016-6271


Have a list that needs to be quoted? Upload it here.

DLMS® Summary

National Stock Number 9390-01-016-6271

National Stock Number (NSN) 9390-01-016-6271, or NIIN 010166271, (bellows,protection) was assigned February 15, 1976 in the Federal Logistics Information System (FLIS). This NIIN is Available for Manual Assignment. This NSN does not replace any other NSNs.

There is only one manufacturer part number associated with this NSN. None of the associated part number(s) are considered obsolete. The manufacturer part numbers were originally supplied by 2 suppliers. Today, one supplier is listed as an Active supplier for this NSN. Of the active suppliers, there are no suppliers that are deemed design controlled or valid supply parts.

This part number has not been procured by the US Government in over 5 years.

This NSN is unique to one weapons system.

There has been very little demand for this national stock number. The demand for this NSN originated from less than 5 countries. Based on a planned procurement review by the Primary Inventory Control Activity (PICA) on Mar 02, 2006, this NSN's acquisition method was noted as: Acquire directly from the actual manufacturer, whether or not the prime contractor is the actual manufacturer. The Government physically does not have in its possession sufficient, accurate, or legible data to purchase this part from other than current source(s). (NOTE: This code is applicable only to parts under immediate buy requirements and only as long as the deficiency is under review for resolution and appropriate recoding.) Valid AMCs: 1, 2, 3, 4 and 5.

This NSN is assigned to Item Name Code (INC) 35168. [A NONMETALLIC, ACCORDIAN SHAPED PROTECTIVE COVERING DESIGNED TO FLEX DUE TO RELATIVE MOTION BETWEEN PARTS TO WHICH ITS OPPOSITE ENDS ARE ATTACHED. IT IS PRIMARILY USED TO COVER THE OPENING AROUND A MOVABLE PUSH-PULL ROD OR PART PASSING THROUGH A HOLE IN A BULKHEAD, PARTITION OR THE LIKE.]. This item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. There is no information in the HMIRS; however, the NSN is in an FSC in Table II of Federal Standard 313 and an MSDS may be required by the user. The requirement for an MSDS is dependent on a hazard determination of the supplier or the intended end use of the product. NSN 9390010166271 does not contain precious metals.

This NSN is associated to Schedule B 4016930000: gaskets, washers and other seals, of vulcanized rubber other than hard rubber. The Schedule B End Use is listed as industrial rubber products. NAICS classification category 339991: gasket, packing, and sealing device manufacturing.

This information was last updated on .


Technical Characteristics

CONTRACTED LENGTH
(ATEN) 1.375 INCHES NOMINAL
EXTENDED LENGTH
(ATEM) 8.375 INCHES MAXIMUM
FEATURES PROVIDED
(CBBL) FLANGED BASE
LARGE END INSIDE LENGTH
(CPYM) 0.188 INCHES NOMINAL
LARGE END INSIDE DIAMETER
(CDDB) 7.375 INCHES NOMINAL
LARGE END OUTSIDE DIAMETER
(AHMG) 9.000 INCHES NOMINAL
MATERIAL
(MATT) RUBBER SYNTHETIC
MOUNTING HOLE DIAMETER
(ABTB) 0.312 INCHES NOMINAL
MOUNTING HOLE QUANTITY
(ABTJ) 12
NEUTRAL LENGTH
(CPYN) 4.875 INCHES NOMINAL
SMALL END INSIDE DIAMETER
(CDDD) 6.062 INCHES NOMINAL
SMALL END OUTSIDE DIAMETER
(AHMH) 7.375 INCHES MAXIMUM
THICKNESS
(ABNM) 0.062 INCHES NOMINAL
MOUNTING HOLE SPACING
(ALXY) 6 HOLES EQUALLY SPACED ON 6.625 IN. DIA BOLT CIRCLE ONE END,6 HOLES EQVALLY SPACED ON 8.250 IN. DIA BOLT CIRCLE OPPOSITE END

Manufacturer Part Numbers


Related Inventory

616314-36566

Condition NE
PIP Fire-Resist
Readily Available
701-2144253 PC 10
5310011436561
Condition NS
WASHER
Readily Available
S8157N487-032
5310011436564
Condition NE
SPACER
Readily Available
701-2144253-10
5310011436561
Condition NE
FASTENER
Readily Available
4668273
5310014365685
Condition NS
NUT
Readily Available
R6001201
2805001436567
Condition NS
VALVE
Readily Available
5330-00-614-3656
006143656.5330
Condition NS
PACKING
Readily Available
68104-007
5331014365697
Condition NS
O-RING
Readily Available
5000
4730014365635
Condition NS
COUPLING
Readily Available
14365613
5306-01-436-5613
BOLT,U
Readily Available


 
Top