ISO Group Logo
Defense and Aerospace
Supply Chain Partner
A Dynatech International Company


NSN 9540-01-495-9944, 9540014959944
BEAM,STRUCTURAL

Federal Supply Classification
FSC 9540 - Structural Shapes, Nonferrous Base Metal
National Item Identification Number
NIIN 014959944
Codification Country
United States
Item Name Code
INC 37018
Criticality
(X) This item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
Hazardous Material Indicator Code
(N) There is no data in the HMIRS and the NSN is in an FSC not generally suspected of containing hazardous materials.
Availability: Request Qualified Suppliers: Currently qualifying suppliers

Manufacture or supply this part?
Join our growing community of certified suppliers.

Let Us Know
  CALL ABOUT NSN 9540-01-495-9944
Our client representatives are standing by to help fulfill your request.

+1-321-773-5710

  REQUEST QUOTE for 9540-01-495-9944


Have a list that needs to be quoted? Upload it here.

DLMS® Summary

National Stock Number 9540-01-495-9944

National Stock Number (NSN) 9540-01-495-9944, or NIIN 014959944, (beam,structural) was assigned March 29, 2002 in the Federal Logistics Information System (FLIS). This NIIN is Available for Manual Assignment. This NSN does not replace any other NSNs.

There is only one manufacturer part number associated with this NSN. None of the associated part number(s) are considered obsolete. The manufacturer part numbers were originally supplied by one supplier. Today, one supplier is listed as an Active supplier for this NSN. Of the active suppliers, only one supplier is deemed design controlled or valid supply parts.

This part number has not been procured by the US Government in over 5 years.

This NSN is somewhat common among different platforms, belonging to 2 different weapons systems.

Based on a planned procurement review by the Primary Inventory Control Activity (PICA) on Mar 02, 2006, this NSN's acquisition method was noted as: Acquire directly from the actual manufacturer, whether or not the prime contractor is the actual manufacturer. The Government physically does not have in its possession sufficient, accurate, or legible data to purchase this part from other than current source(s). (NOTE: This code is applicable only to parts under immediate buy requirements and only as long as the deficiency is under review for resolution and appropriate recoding.) Valid AMCs: 1, 2, 3, 4 and 5.

This NSN is assigned to Item Name Code (INC) 37018. [A STRUCTURAL SHAPE FABRICATED FROM A FERROUS OR NONFERROUS MATERIAL AND RESEMBLES THE FOLLOWING CROSS-SECTIONAL FORMS: FOR THE LETTER H, BOTH FLANGES OF THE H SECTION ARE EQUAL OR LONGER THAN THE WIDTH MEASURED ALONG THE AXIS OF THE WEB; FOR THE LETTER I, A 16 2/3 PERCENT SLOPE ON THE INSIDE FACE OF THE FERROUS TYPE FLANGE, EITHER ONE OR BOTH OF THE NONFERROUS TYPE FLANGES ARE SHORTER THAN THE LENGTH MEASURED ALONG THE AXIS OF THE WEB; FOR THE LETTERS T AND Z, ON NONFERROUS TYPE, THE WEB IS USUALLY AT RIGHT ANGLES TO THE FLANGES. LETTER H SECTION MAY HAVE A MAXIMUM OF 5 PERCENT SLOPE ON THE INSIDE FACE OF THE FLANGES.]. This item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. There is no data in the HMIRS and the NSN is in an FSC not generally suspected of containing hazardous materials. NSN 9540014959944 does not contain precious metals.

This information was last updated on .


Technical Characteristics

UNABLE TO DECODE
(MATL) UNABLE TO DECODE
III SUPPLEMENTARY FEATURES
(SUPP) MATL THICK AT 0.100 INCH
BASIC SHAPE STYLE
(AGTA) I SHAPE
BOTTOM FLANGE WIDTH
(BQJH) 4.400 INCHES NOMINAL
FABRICATION METHOD
(AARN) EXTRUDED
FIRST TIP STYLE
(CMZY) SQUARE END
FOURTH TIP RELATIONSHIP TO PRECEDING TIPS
(CNQN) IDENTICAL W/FIRST TIP
HEAT TREATMENT
(HEAT) T-76511 SOLUTION HEAT TREATED
LEFT BOTTOM INSIDE ANGLE
(CTBR) 90.0 DEGREES NOMINAL
LEFT TOP INSIDE ANGLE
(CSMZ) 90.0 DEGREES NOMINAL
LENGTH
(ABRY) 10.000 FEET MINIMUM AND 12.000 FEET MAXIMUM
OVERALL HEIGHT
(ABKW) 1.865 INCHES NOMINAL
MATERIAL DOCUMENT AND CLASSIFICATION
(MDCL) QQ-A-200/11 FED SPEC 1ST MATERIAL RESPONSE
MATERIAL
(MATT) ALUMINUM ALLOY 7075
NONDEFINITIVE SPEC/STD DATA
(ZZZT) 7075 ALLOY AND T76511 TEMPER
SPECIAL FEATURES
(FEAT) ANGLE ENDS ARE RADIUS PER DATA PROVIDED
RIGHT BOTTOM INSIDE ANGLE
(CWKK) 90.0 DEGREES NOMINAL
RIGHT TOP INSIDE ANGLE
(CRZC) 90.0 DEGREES NOMINAL
SECOND TIP RELATIONSHIP TO FIRST TIP
(CNQJ) IDENTICAL
SECOND TIP STYLE
(CNQK) SQUARE END
WEIGHT PER UNIT MEASURE
(BRFD) 0.991 POUNDS PER LINEAR FOOT
SUPPLEMENTARY FEATURES
(SUPP) MATL THICK AT 0.100 INCH
THIRD TIP RELATIONSHIP TO PRECEDING TIPS
(CNQL) IDENTICAL W/FIRST TIP
TOP FLANGE WIDTH
(BQJG) 3.800 INCHES NOMINAL
MATERIAL
(MATL) ALUMINUM ALLOY, QQ-A-200/11
NONDEFINITIVE SPEC/STD DATA
(ZZZT) ALLOY 7075,TEMPER T76511


Related Inventory



 
Top